Roll forming process is one of the most widely used processes in the world for forming metals such as a furniture drawer guide or an up and down slide guide. It can manufacture goods of the uniform cross section on a large scale throughout the continuous processing. In the domestic design and manufacture, roll forming process for production is taking most of the method of 2-point under rail slide. However, this method is vulnerable to the structural strength and stiffness is not suitable for high load conditions. Therefore, through systematic study of high load, low noise 3-point ball type of under rail slide its own design and manufacturing technology is the need to build. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Modeling and simulation of roll forming is used MSC.MARC software of a dedicated analysis program used by rigid plastic finite element method. Interference between the roll and the final shape are predicted from the results of the simulation.
When developing projects to build facilities to be shared by both military bases and surrounding communities, strategies are needed to achieve two objectives: 1) minimize missteps and opposition from local communities in the process of developing and implementing such projects, and 2) promote cost-benefit optimization and user-satisfaction. With aim of promoting co-operation and co-existence between military bases and adjust communities, this research proposes esthetical factors to be considered in conceiving civil-military sharing facilities. It seeks experts' opinions on the development of civil-military sharing facilities, and examines critical factors (economic feasibility, security, and satisfaction, etc.) for project development as well as building types suitable for shared-use between military bases and local residents. It then establishes a method to prioritize facility-type and narrow down design factors (considerations and restrictions) in project development by applying quantitative analysis. The methodological approach of the research employs the Delphi survey method to quantitatively analyze qualitative information drawn from experts' opinions. At the first round of the survey, facility types, items for consideration and restrictions are drawn, and then at the second round of the survey, criticality of each item is analyzed. Finally, it reaches a conclusion on suitability of facility types for civil-military sharing facilities, and selects project considerations and restrictions when developing this kind of project.
MTO (Make to Order) is a manufacturing process in which manufacturing starts only after a customer's order is received. Manufacturing after receiving customer's orders means to start a pull-type supply chain operation because manufacturing is performed when demand is confirmed, i.e. being pulled by demand (The opposite business model is to manufacture products for stock MTS (Make to Stock), which is push-type production). There are also BTO (Build to Order) and ATO (Assemble To Order) in which assembly starts according to demand. Lean manufacturing by MTO is very efficient system. Nevertheless, the process industry, generally, which has a high fixed cost burden due to large-scale investment is suitable for mass production of small pieces or 'mass customization' defined recently. The process industry produces large quantities at one time because of the lack of manufacturing flexibility due to long time for model change or job change, and high loss during line-down (shutdown). As a result, it has a lot of inventory and costs are increased. In order to reduce the cost due to the characteristics of the process industry, which has a high fixed cost per hour, it operates a stock production system in which it is made and sold regardless of the order of the customer. Therefore, in a business environment where the external environment changes greatly, the inventory is not sold and it becomes obsolete. As a result, the company's costs increase, profits fall, and it make more difficult to survive in the competition. Based on the customer's order, we have built a new method for order system to meet the characteristics of the process industry by producing it as a high-profitable model. The design elements are designed by deriving the functions to satisfy the Y by collecting the internal and external VOC (voice of customer), and the design elements are verified through the conversion function. And the Y is satisfied through the pilot test verified and supplemented. By operating this make to order system, we have reduced bad inventories, lowered costs, and improved lead time in terms of delivery competitiveness. Make to order system in the process industry is effective for the display glass industry, for example, B and C groups which are non-flagship models, have confirmed that the line is down when there is no order, and A group which is flagship model, have confirmed stock production when there is no order.
In a PCB factory, there is a corrosive chemical substance supply system that can causes major leakage accidents. These accidents can give rise to shut down the factory and do residents damage that cause enormous loss of properties. To mitigate these risks, it is necessary to provide a chemical disaster prevention system. Moreover, after considering the situation and environment of the production site, it is of great importance to build an optimal chemical accident prevention system by reflecting risk reduction measures from the point of process design and by assessing quantitative risk based on reliability data. However, because there was no established database of the reliability about facilities and equipment that can be used in the domestic, the business site and consulting organization had being used the reliability data such as USA CCPS(Center for Chemical Process Safety). In these days, Korean institutes are studying on reliability data utilization method of quantitative risk assessment for preventing chemical accidents and domestic utilization algorithms and storage bed of reliability data. This study presents samples of reliability database about the chemical substance supply system that constructed from the history data such as failure, maintenance for 10 years at a PCB factory. Also, this work proposes the safety design criteria for supply facilities of corrosive chemical substance by assessing quantitative risk on the basis of the reliability data.
Objective : UMLS is 'Ontology' which establishes the database for medical terminology by gathering various medical vocabularies representing same fundamental concepts. Method : Although Chinese character are represented in the Chinese part of Korean Unicode system in a computer, writing of Chinese characters is vary depending on Chinese input systems and Chinese writers' levels of knowledge. As the result of this, representation of Chinese writing in a computer will be considerably different from an old Chinese document. Therefore, a meaningful relationship between digital Chinese terminology and translated Korean is necessary in order to build Ontology for Chinese medical terms from Oriental medical prescription in a computer system. Result : This research will present 1:1 mapping information among the Chinese characters used in the Oriental medical prescription with analysis of 'same character different sound' and 'same meaning different shape' in Chinese part of Unicode systems. Conclusions : Furthermore, the research will provide top-down menu of relationship between Chinese term and Korean term in medical prescription with assumption of that the Oriental medical prescription has its own unique meaning.
오늘날 RFID 응용 시스템은 점차 발전되고 물류, 유통, 항만 그리고 제조 등 다양한 산업분야에서 적용되고 있다. RFID 응용 시스템 개발을 위한 국제 표준으로 EPCglobal 에서는 EPC Network 아키텍처를 제시하고 있다. EPC Network 아키텍처를 통해 개체의 고유정보(master information) 및 이력정보(event information)를 수집해야 한다. 그러나 개체의 고유정보 및 이력정보를 저장하고 있는 EPCIS의 경우는 수집된 EPC와 각 개체가 가지는 이력정보의 수에 의존적으로 통신 횟수가 증가하며, 개별적인 EPC에 대한 처리로 인해 동일한 EPCIS와 여러 번 통신해야 하는 문제점이 존재한다. 이러한 문제점은 EPCIS와의 통신시간의 증가로 인해 RFID 응용 시스템의 성능을 저하 시키게 된다. 따라서 본 논문에서는 EPCIS와의 통신 시간을 감소시키기 위하여 동일한 EPCIS와의 통신을 제거하는 EPCIS 주소별 그룹 질의 기법을 제시한다. 또한, 본 논문에서 제시한 기법을 적용하고 실제 EPC Network 환경을 구축하고 다양한 실험을 통하여 효용성을 검증하였으며 EPCIS의 통신 시간이 최대 99% 감소하는 것을 확인할 수 있었다.
It has been declared in 1992 at Rio about the management of united water control and method of the management of the water resources at the water basin. And it was also mentioned about the protection of fresh water's quality and it's supply under chapter the 18th of the agenda 21. It has been 10years passed after Rio declaration, and water crisis Is getting more serious than before. Fairly, right for using water resources was given to every life as the public resources. But at the last world water forum, water was commercialized, and regulated as the basic requirement not basic right. Therefore, we could use the water according to the logic of supply and demand at the market, and with money. Furthermore, construction of the big dam which was build to solve the problem of the lack of water became one of problems for water control. Korea is keeping consistent policy such as providing water by the building of dam. Control of the water demand is the most basic and effective policy for the preservation of water resources. If we change the policy such as the construction of the dam, we should put the management of the water demand in the center with the reliable philosophy. United management of the river basin has to be made with the security of water, improvement of water quality, and protection of the ecological side each other. Management of water basin also has to be completed to solve the trouble caused by using water conflict people who live up and down stream. To maintain the good quality of water, management of water basin is necessary. Also, bottom line of the united management of water basin is voluntary involvement of every citizens and local community. We suggest to preserve the origin of river and the upper at the ecological side. It is worth it to preserve.
적극적인 FTA정책의 추진으로 한·중 양국의 FTA 체결국은 급증하고 있으며, 한·중 FTA도 가까운 시기에 협상에 임하게 될 것이다. 본 연구의 목적은 가까운 미래에 착수될 한·중 정부간 FTA 협상에서 가장 핵심적인 쟁점사항이 될 원산지기준의 원만한 타결을 위해 바람직한 합의안을 도출하는 것이다. 이러한 바람직한 합의안을 도출하기 위해 저자들은 한국과 중국이 각각 제3국·지역과 체결한 9개의 FTA 관련 협정문을 토대로, 9개의 서로 상이한 원산지 협정문에서의 구체적 원산지 적용기준을 살펴보고, 이들의 특징에 대하여 비교 분석하였으며, 이 분석을 통하여 유사점과 차이점을 찾아내 바람직한 하나의 합의안을 도출하였다. 연구결과, 한·중 FTA에서 실질적 변형기준에 있어서는 아시아에서 활용이 가장 많은 4단위의 세번변경기준과 역내 부가가치 40% 이상의 부가가치기준 중에서 택일하는 기준이 채택되어야 한다는 결론에 도달하였다. 아울러 부가가치 비율을 계산함에 있어서는 계산방법·가격기준 등을 단순화·표준화해야 하며, 따라서 객관적인 공제법 사용을 위주로 하고, 가격기준은 명확한 기준이 되는 CIF나 FOB를 적용하여야 한다는 결론을 얻었다.
본 연구는 고종 연간 변형된 창덕궁 존덕정 일원의 지당을 대상으로 변모된 내용과 경위를 구명하고 조선시대 궁원 조영의 통시적 차원에서 이의 내적 맥락을 고찰한 것이다. 도출된 결론은 다음과 같다. 첫째, 존덕정 일원의 지당이 변형되기 시작한 시점은 19세기 후반에 촬영된 사진과 "고종실록"의 기록을 근거로 고종 21년(1884년)으로 판단하였다. 둘째, 개축 존덕정 일원의 지당은 향원지와 유사한 공간구성을 갖도록 정비되어 갔던 바, 고종이 창덕궁 환어 후 착수한 존덕정 일원 지당의 개조는 경복궁 건청궁과 향원지의 정감을 재현한 결과물로 판단된다. 셋째, 개축 존덕정 일원 지당의 교량은 연경당과 존덕정 영역을 통합하는 후원 기능 확장의 방편으로 활용되었다. 이것은 경복궁에서 건청궁이 향원정을 잇는 취향교를 통해 일대의 공간을 점유했던 방법과 같았다. 넷째, 고종때에 조성된 존덕정 일원 지당과 향원지는 연경당과 건청궁의 이용을 전제로 한 것이었으며, 나아가 두 일곽의 위상을 반영한 것이었다. 다섯째, 개축 존덕정 일원의 지당은 단순히 고종의 경관을 감상하는 취향에 따라 필요한 공간을 조성한 것이 아니라, 선대부터 전승되어온 후원정당의 맥락상에 있는 조영체로 판단된다.
조선시대 종묘(宗廟)에 모실 수 없는 왕의 사친, 등극하지 못한 세자와 같은 왕족의 신위를 모신 공간, 사묘(私廟)는 왕명에 의해 건립되고 관리되었다. 또한 사묘의 영건은 각 의궤(儀軌)에 담겼고 이와 함께 왕실사묘의 평면배치도 등이 남겨졌다. 정조의 후궁으로 순조(純祖)를 생산한 수빈박씨(綬嬪朴氏)의 신위를 모신 경우궁의 영건기록인 1824년 "현사궁별묘영건도감의궤(顯思宮別廟營建都監儀軌)"가 현존하기에 그간 소개된 바도 없고 연대조차도 알 수 없었던 <경우궁도(景祐宮圖)>의 제작 연대, 사용재료 및 장황(粧潢) 등을 살펴볼 수 있다. 즉 <경우궁도>는 1822년에 타계한 수빈박씨의 신위를 모시기 위해 궁내에 설치했던 혼전(魂殿)을 폐하고 궁밖에 별도로 마련한 터에 왕명에 의해 1824년 현사궁별묘를 영건하면서 영건도감(營建都監)에서 제작한 <현사궁별묘전도>인 것으로 확인된다. 영건도감에서 <경우궁도>의 제작이 이루어졌을 것이기에 의궤에 제시된 화원(畵員)들이 주목되지만 이들의 현존작이 없어 화풍을 비교할 수 없음은 아쉬움으로 남는다. 하지만 <경우궁도>는 <동궐도(東闕圖)>에서 볼 수 있는 완벽한 평행사선구도로 일목요연하게 많은 전각 등을 묘사하고 있는 점이 가장 큰 양식적 특징으로 지적할 수 있다. 주지하듯 건축물을 다룬 그림들은 해당 건축그림 제작 의도에 맞게 시점을 택해 그리거나 아니면 다시점을 이용해 그리게 된다. 우리 회화에서 건축물을 다룬 그림은 일찍부터 평행사선구도, 정면부감시 또는 다시점 등을 적절히 활용하여 제작되었다. 18세기에 이르면 평행사선구도로 정확하게 그리면서도 회화성도 높은 작품들이 등장하기 시작하는데 19세기 전반기에 이와 같은 현상이 최고로 발전한 듯 <동궐도>가 등장한다. <경우궁도> 또한 완성된 평행사선구도로 200칸 가까운 많은 전각들을 한눈에 알아볼 수 있도록 치밀하게 표현하고 있어 <동궐도>와 같은 계열에 속하는 건축그림으로 볼 수 있다. 이는 또한 수지법, 옥우법, 지면의 표면질감 표현 등 구체적 화법의 비교를 통해 알 수 있다. 다만 사당공간 중 가장 중요한 정당권역만은 의궤도설 '정당이하제처(正堂以下諸處)'라는 평면배치도와 그대로 일치하여 평행사선구도를 버리고 정면부감시 및 사방전도식묘법으로 표현된 점은 <경우궁도>만이 갖는 특징으로 지적될 수 있다. 동시대 영건과 관계된 그림은 아닌 개인의 거주지를 표현한 그림에 이와 같이 시점을 각각 달리하여 표현한 예가 있기도 하여 사당공간을 그린 그림만이 가지는 특성인지는 아직 정확히 알 수 없다. 한편 왼편 하단으로 향하는 평행사선구도를 택해 그릴 경우 화면 왼편 상단과 오른편 하단은 비게 된다. 경우궁도가 이에 부합되는 화면을 보여주는데 반해 동궐도는 다양한 나무 등을 채워 빈 여백 없는 완벽한 화면 구성을 보여준다. 이와 같은 현상은 두 작품의 장황의 현황과도 일치하는데 지본 낱장으로 완성된 경우궁도는 화첩으로 표제까지 달아 완성된 동궐도와는 완성도의 면에서 차이가 있다고 판단된다. 이는 마치 동궐도가 그 묘사의 사실성, 기록성을 넘어 감상의 목적까지도 고려하여 작품제작 및 장황까지 마친 것이었다면 경우궁도는 영건의 상황을 있는 그대로 화면에 옮겨 그리는 기록이 가장 중요한 목적으로 제작되었음을 알게 해주는 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.