• Journal of Pharmaceutical Investigation
• /
• 제16권2호
• /
• pp.43-54
• /
• 1986

To increase the bioavailability of clonixin, clonixin argininate was prepared and compared with clonixin by determining solubility, pKa, lipid-water partition coefficient, dissolution rate and in vivo tests. The results are summerized as followings; 1) The solubility of clonixin argininate was increased by 20 times in water, about 1.2 times in pH 1.2 and pH 8.0 buffer solution, and about 1.8 times in pH 6.8 buffer solution compared with that of clonixin. 2) pKa values of clonixin, clonixin lysinate and clonixin argininate were 6.32, 7.20 and 7.45, respectively. 3) The lipid-water partition coefficient of clonixin argininate was increased more than that of the clonixin in n-hexane, carbon tetrachloride, chloroform, methylene chloride, and n-butanol, but the partition coefficient of clonixin was increased more than that of clonixin argininate in benzene/pH 1.2 buffer solution, ether/pH 8.0 buffer solution, and 3-methylbutyl acetate/pH 1.2, pH 8.0 buffer solution. 4) The time required to dissolve 60% $(T_{60%},\;min.)$ of clonixin argininate was about 1.5 min. in water and pH 1.2 buffer solution, and about 5 min. in pH 6.8 buffer solution. $T_{60%}$ of clonixin lysinate was about 1.5 min. in water, about 1.8 min. in pH 6.8 buffer solution, and about 8 min. in pH 1.2 buffer solution. But $T_{60%}$ of clonixin was about 96 min. in pH 6.8 buffer solution, over 2 hours in water and pH 1.2 buffer solution. 5) Anti-inflammatory effect of clonixin argininate was increased more than that of clonixin over 6 hours, and that of clonixin lysinate was followed by lapse of time. 6) Analgesic effect of clonixin argininate was increased by 1.5 times more than that of clonixin and the effect of clonixin argininate was nearly identical with that of clonixin lysinate. 7) The absorption rates (Ka) of clonixin, clonixin lysinate and clonixin argininate were $0.169\;hr^{-1},\;0.652\;hr^{-1}$ and $0.723\;hr^{-1}$ in situ, respectively.

• 한국토양비료학회지
• /
• 제44권2호
• /
• pp.297-302
• /
• 2011

Acid drainage generated by pyrite oxidation has caused the acidification of soil and surface water, the heavy metal contamination and the corrosion of structures in abandoned mine and construction sites. The applicability of Na-acetate (Na-OAc) buffer and/or Na-silicate solution was tested for suppressing pyrite oxidation by reacting pyrite containing rock and treating solution and by analyzing solution chemistry after the reaction. A finely ground Mesozoic andesite containing 10.99% of pyrite and four types of reacting solutions were used in the applicability test: 1) $H_2O_2$, 2) $H_2O_2$ and Na-silicate, 3) $H_2O_2$ and 0.01M Na-OAc buffer at pH 6.0, and 4) $H_2O_2$, Na-silicate and 0.01M Na-OAc buffer at pH 6.0. The pH in the solution after the reaction with the andesite sample and the solutions was decreased with increasing the initial $H_2O_2$ concentration but the concentrations of Fe and $SO_4^{2-}$ were increased 10 - 20 times. However, the pH of the solution after the reaction increased and the concentrations of Fe and $SO_4^{2-}$ decreased in the presence of Na-acetate buffer and with increasing Na-silicate concentration at the same $H_2O_2$ concentration. The solution chemistry indicates that Na-OAc buffer and Na-silicate suppress the oxidation of pyrite due to the formation of Fe-hydroxide and Fe-silicate complex and their coating on the pyrite surface. The effect of Na-OAc buffer and Na-silicate on reduction of pyrite oxidation was also confirmed with the surface examination of pyrite using scanning electron microscopy (SEM). The result of this study implies that the treatment of pyrite containing material with the Na-OAc buffer and Na-silicate solution reduces the generation of acid drainage.

• 한국염색가공학회지
• /
• 제31권4호
• /
• pp.249-257
• /
• 2019

Baker's yeast(Saccharomyces cerevisiae) was used as a biocatalyst for eco-friendly indigo dyeing and the reducing power of yeast according to the alkaline solution type was compared. NaOH solution, lye, and buffer solution were used as alkaline solutions. The reducing power(K/S value, oxidation/reduction potential(ORP), pH) was monitored according to the elapsed time including the initiation of reduction, peak reduction, and the end of reduction. In all alkaline solutions, it was confirmed that yeast can be used reducing agent in indigo reduction dyeing. The pH stability and reducing power of buffer solution was better than that of NaOH alone. Although, pH and ORP stability of the reduction bath in lye were better than that of buffer solution, K/S value in buffer solution was higher compared to lye. The reducing power was different depending on the starting pH of the dye bath, and it was better when starting at pH 10.70 than at pH 11.30. Fastnesses to washing, rubbing, and light were relatively good with above rating 4. There was no significant difference in colorfastness depending on the type of alkaline solutions.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.37-40
• /
• 2006

Oxide buffer layers for YBCO coated conductors were fabricated using MOD processing and development of microstructure and texture were investigated. A $CeO_2$ buffer layers were formed on RABiTS tape. Acetate-based precursor solution was employed to synthesize the precursor solution. Subsequently, the precursor solution was stabilized and modified with triethanolamine. $CeO_2$ precursor gel film was coated and annealed in $Ar/H_2$ atmosphere at high temperature. An annealed $CeO_2$ film shows mixed orientation with high (001) texturing. It was shown that (111) texture of $CeO_2$ layers were enhanced by multiple coating. This degradation was attributed to development of microcracks in the multiply coated $CeO_2$ films. Also discussed are the synthesis and the characterization of $La_2Zr_2O_7$ (LZO) buffer layers on RABiTS tape. A biaxially textured LZO buffer layer was fabricated with MOD processing method using metal alkoxide based precursor solution. It was shown that the LZO film were epitaxially grown on RABiTS tape and crack-free & uniform surface was obtained after annealing in $Ar/H_2$ atmosphere.

• KSBB Journal
• /
• 제7권2호
• /
• pp.118-125
• /
• 1992

1.에멀젼형 화장품시료의 오염정도는 P. aeruginosa의 증식을 촉진하는 fatty acids, waxs, oils, steroids 등의 유기물에 의존하였다. 2. 오염의 결과, 물성의 변화로서 화장품시료의 pH가 40일 경과시 7.6에서 6.0으로 변화되었다. P. aeruginosa의 영양원으로서는 상대적으로 낮은 굴절률을 갖는 물질들이 소모되어 화장품시료(물:오일=70:30)의 굴절률이 1.4430에서 1.4530으로 변화 되었다. 3. 오염이 진행되는 동안 화장품시료의 相의 안정서이 파괴되었으며, 약간의 변색, 변취와 함께 creaming 및 응집현상이 나타났다. 4. P. aeruginosa의 최적증식조건인 pH7.0, 온도$20^{\circ}C$에서, 물과 오일의 부피비에 의한 균증식은 70:30, 80:20, 30:70, 90:10, 50:50의 순서로 되었다. 5. 방부살균제를 첨가하여 challenge test를 한 결과, P. aeruginosa의 증식이 억제되었으며 40일 경과시 균수는 방부살균제를 첨가하지 않은 경우 $10^8$개/ml에서 p-hydroxy benzoic acid propyl ester + phosphoric acid buffer solution첨가로 $5{\times}10^3$ 개/ml로 감소되었다. 6. 시험균주인 P. aeruginosa에 대한 항균력은 p-hydroxy benzoic acid propyl ester + phosphoric acid buffer solution>p-hydroxy benzoic acid buthyl ester + acetic acid buffer solution>p-hydroxy benzoic acid methyl ester + phosphoric acid buffer solution>p-hydroxy benzoic acid methyl ester + p-hydroxy benzoic acid propyl ester>p-hydroxy benzoic acid buthyl ester + potassium chloride sodium hydroxide buffer solution>p-hydroxy benzoic acid buthyl ester + p-hydroxy benzoic acid propyl ester>p-hydroxy benzoic acid methyl ester + acetic acid vbuffer solution>acetic acid buffer solution _ potassium chloride sodium hydroxide buffer solution의 순으로 우수하였으며 pH, 농도, 균수등은 양호한 수준을 유지하였다.

• 한국균학회지
• /
• 제15권4호
• /
• pp.254-259
• /
• 1987

4가지 균주의 포자를 4가지의 용액으로 Non-leaching과 Leaching하에서 배양하고 발아율을 조사한 결과 다음과 같다. Non-leaching배양된 Fusarium solani f. sp. pisi의 경우 포자발아율은 pfeffer's solution에서 90%로 가장 낮았으며 Buffer solution에서 99%로 가장 높았다. Leaching배양의 경우 subsoil extract에서 51%로 포자발아가 억제되었고 pfeffer's solution에서 63%로 덜 억제되었다. Non-leaching배양한 Fusarium oxysporum f. sp. cucumerium의 경우 포자발아율은 증류수에서 31%로 가장 적게 억제되었고 Buffer solution에서 45%로 가장 많이 억제되었다. Leaching배양의 경우 Buffer solution에서 17.5%로 가장 억제되었고 증류수에서 25%로 덜 억제되었다. Non-leaching배양한 Helminthosporium sativa의 경우 증류수에서 86.1%로 발아가 낮았고 Buffer solution에서 98%로 높았다. Leaching배양의 경우 Buffer solution에서 47%로 발아가 억제되었고 증류수에서 80.4%로 덜 억제되었다. Non-leaching배양한 Mortierella n. sp.의 경우 발아율은 subsoil extract에서 38.5%로 낮았고 증류수에서 62.5%로 높았다. Leaching배양의 경우 발아율은 증류수에서 15%로 크게 억제되었고 pfeffer's solution에서 37.5%로 덜 억제되었다.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.455-461
• /
• 2007

The electric current of a flow injection type enzyme-sensor was measured to confirm the stable operating conditions of the sensor. The current of the sensor was decreased as the buffer solution velocity increased. Under the limitation of the cycle time to be below 10 minutes, the effective ranges of the buffer solution velocity were suggested $0.10{\sim}0.26$, $0.12{\sim}0.24$, $0.1{\sim}0.25$ and $0.05{\sim}0.10\;cm/s$ of 1.0, 1.4, 2.4 and 3.4 mm of the electrode diameters, respectively. As the reaction time of the enzyme and the substrate was increased, the current was decreased because of the dilution between the sample and buffer solution. Therefore, it could be recommended that the reaction time was able to be selected as shortly as possible in consideration of the total cycle time. As the result of the experiments using a different volume ratio of the enzyme to substrate, it was concluded that the substrate had to be mixed with the same amount of the enzyme. The current have increased remarkably in proportion to the electrode diameter under 0.1 cm/s of the buffer solution velocity but there was no difference over 0.1 cm/s of the buffer solution velocity. The cross type arrangement of the electrode was highly suggested for application and machining of the sensor.

• 한국환경과학회지
• /
• 제24권8호
• /
• pp.981-992
• /
• 2015

This study is mainly focused on micellar effect of tetradecyltrimethyl ammonium bromide(TTABr) solution including alkylbenzimidazole(R-BI) on dephosphorylation of diphenyl-4-nitrophenylphosphinate(DPNPIN) in carbonate buffer(pH 10.7). Dephosphorylation of DPNPIN is accelerated by $BI^{\Theta}$ ion in $10^2$ M Carbonate buffer(pH 10.7) of $4{\times}10^{-4}$ M TTABr solution up to 80 times as compared with the reaction in Carbonate buffer by no benzimidazole(BI) solution of TTABr. The value of pseudo first order rate constant($k_{\psi}$) of the reaction in TTABr solution reached a maximum rate constant increasing micelle concentration. The reaction mediated by $R-BI^{\Theta}$ in micellar solutions are obviously slower than those by $BI^{\Theta}$, and the reaction rate were decreased with increase of lengths of alkyl groups. It seems due to steric effect of alkyl groups of $R-BI^{\Theta}$ in Stern layer of micellar solution. The surfactant reagent, TTABr, strongly catalyzes the reaction of DPNPIN with R-BI and its anion($R-BI^{\Theta}$) in Carbonate buffer(pH 10.7). For example, $4{\times}10^{-4}$ M TTABr in $1{\times}10^{-4}$ M BI solution increase the rate constant($k_{\psi}=99.7{\times}10^{-4}1/sec$) of the dephosphorylation by a factor ca. 28, when compared with reaction($k_{\psi}=3.5{\times}10^{-4}1/sec$) in BI solution(without TTABr). And no TTABr solution, in BI solution increase the rate constant($k_{\psi}=3.5{\times}10^{-4}1/sec$) of the dephosphorylation by a factor ca. 39, when compared with reaction ($k_{\psi}=1.0{\times}10^{-5}1/sec$) in water solution(without BI).

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.637-640
• /
• 2017

The adoption of cladding panels as dissipation device is a sort of passive control "ante litteram" for residential and commercial buildings. This paper gives details on the current technology outlining the difference between buffer panels and cladding panels. The discussion of robustness and resilience of the resulting system is afforded. It is shown that the strength of such solution, originally related to economy and light weight, is mainly associated with the respect of the main robustness requisites, as well as the short time it requires for removal and replacement (resilience).

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.171-177
• /
• 2003

The electronic properties of the passive film formed on Fe-20Cr ferritic stainless steel in pH 8.5 buffer solution containing 0.05 M EDTA (ethylene diammine tetraacetic acid) were examined by the photocurrent measurements and Mott-Schottky analysis for the film. XPS depth profile for the film demonstrated that Cr content in the outermost layer of the passive film was higher in the solution with EDTA than that in the solution without EDTA, due to selective dissolution of Fe by EDTA. In the solution with EDTA, the passive film showed characteristics of an amorphous or highly disordered n-type semiconductor. The band gap energies of the passive film are estimated to be ~ 3.0 eV, irrespective of film formation potential from 0 to 700 $mV_SCE$ and of presence of EDTA. However, the donor density of the passive film formed in the solution with EDTA is much higher than that formed in the solution without EDTA, due to an increase in oxygen vacancy resulted from the dissolution of Fe-oxide in the outermost layer of the passive film. These results support the proposed model that the passive film formed on Fe-20Cr in pH 8.5 buffer solution mainly consists of Cr-substituted $\gamma$-$Fe_2O_3$.