• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.3
• /
• pp.288-298
• /
• 1992

Since the major important factors limiting plant growth and crop productivity are environmental stresses, of which low temperature is the most serious. It has been well known that many physiological processes are alterant in response to the environmental stress. With regard to the relationship between plant hormones and the regulation of chilling tolerance in rice seedlings, the major physiological roles of plant hormones: abscisic acid, ethylene and polyamines are evaluated and discussed in this paper. Rice seedlings were grown in culture solution to examine the effect of such plant hormones on physiological characters related to chilling tolerance and also to compare the different responses among tested cultivars. Intact seedlings about 14 day-old were chilled at conditions of 5$^{\circ}C$ and 80% relative humidity for various period. Cis-(＋)-ABA content was measured by the indirect ELISA technique. Polyamine content and ethylene production in leaves were determined by means of HPLC and GC respectively. Chilling damage of seedlings was evaluated by electrolyte leakage, TTC viability assay or servival test. Our experiment results described here demonstrated the physiological functions of ABA, ethylene, and polyamines related to the regulation of chilling tolerance in rice seedlings. Levels of cis-(＋)-ABA in leaves or xylem sap of rice seedlings increased rapidly in response to 5$^{\circ}C$ treatment. The tolerant cultivars had significant higher level of endogenous ABA than the sensitive ones. The ($\pm$)-ABA pretreatment for 48 h increased the chilling tolerance of the sensitive indica cultivar. One possible function of abscisic acid is the adjustment of plants to avoid chilling-induced water stress. Accumulation of proline and other compatible solutes is assumed to be another factor in the prevention of chilling injuies by abscisic acid. In addition, the expression of ABA-responsive gene is reported in some plants and may be involving in the acclimation to low temperature. Ethylene and its immediate precusor, 1-amincyclopropane-1-carboxylic acid(ACC) increased significantly after 5$^{\circ}C$ treatment. The activity of ACC synthase which converts S-adenosylmethionine (SAM) to ACC enhanced earlier than the increase of ethylene and ACC. Low temperature increased ACC synthase activity, whereas prolonged chilling treatment damaged the conversion of ACC to ethylene. It was shown that application of Ethphon was beneficial to recovering from chilling injury in rice seedlings. However, the physiological functions of chilling-induced ethylene are still unclear. Polyamines are thought to be a potential plant hormone and may be involving in the regulation of chilling response. Results indicated that chilling treatment induced a remarkable increase of polyamines, especially putrescine content in rice seedlings. The relative higher putrescine content was found in chilling-tolerant cultivar and the maximal level of enhanced putrescine in shoot of chilling cultivar(TNG. 67) was about 8 folds of controls at two days after chilling. The accumulation of polyamines may protect membrane structure or buffer ionic imbalance from chilling damage. Stress physiology is a rapidly expanding field. Plant growth regulators that improve tolerance to low temperature may affect stress protein production. The molecular or gene approaches will help us to elucidate the functions of plant hormones related to the regulation of chilling tolerance in plants in the near future.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.593-598
• /
• 2010

The optimum condition for fluoride removal, water content reduction, and $CaF_2$ purity was determined in treating semiconductor waste water in which ammonia nitrogen, phosphorus, and fluoride are existed simultaneously using a fluidized bed reactor. Effects of pH, seed dosage, and recirculation of treated water were investigated through lab-scale experiments. Considering fluoride removal, sludge purity, and water content, that pH 5 and seed dose of 150 g were found to be optimum. Correspondingly, removal of fluoride and phosphate (${PO_4}^{3-}$-P) was 94.24% and 8.97%, respectively, with water content ratio of 12.94%. Increase in an amount of seed dosage not only enhance fluoride removal efficiency, but also buffer fluoride removal-reducing effect due to the variation of recirculation ratio of treated water and pH.

• Journal of Korean Society of Forest Science
• /
• v.83 no.4
• /
• pp.545-555
• /
• 1994

The objective of the study was to provide the useful scientific data on the early rehabilitation of the legging road after timber harvesting in the forest area. This study was carried out at logging roads which were constructed during 1989 and 1994 in Mt. Baekwoon. The field survey was conducted in July, 1991. Judging from the analysis of soil bulk density, time required for recovery as the undisturbed forest soil condition was more than 10 years in the road which was left, and the regression equation is as follows, $$Y_1=1.4195-0.0744{\cdot}X(R^2=0.91)$$ $$Y_2=1.4673-0.0688{\cdot}X(R^2=0.73)$$ (X : elapsed year after road construction. $Y_1$, $Y_2$ : soil bulk density($g/cm^3$) at 0~7.5cm, and 7.5~15.0cm, respectively) Especially soil bulk density with buffer strip-woods was $0.890-0.903g/cm^3$, so it was 20% lower than that of logging road surface without buffer strip-woods. Among the 7 factors, location, sand content, and soil hardness had statistically significant effect on the soil bulk density in logging road surface. The pioneer species on logging road surface were Rhus cratargifolius, Prunus chinensis, and Lespedeza cyrtobotrya, etc. in woody species, and Pteridium aquilinum, Arundinella hirta, and Lysimachia clethroides, etc. in herb species. So, in process of year, average plant coverage were 70% on cutting and banking slope and 20% on logging road surface which elapsed 6 years after logging road construction. Through this research, buffer strip-woods must be remained for environmental conservation of forest conditions, and from the time to be closed the road, planting, seeding, and grazing works could be effective to the soil condition and vegetation recovery.

• Tunnel and Underground Space
• /
• v.30 no.4
• /
• pp.359-381
• /
• 2020

Within the framework of DECOVALEX-2019 Task D, full-scale engineered barriers experiment (FEBEX) at Grimsel Test Site was numerically simulated to investigate an applicability of implemented Barcelona basic model (BBM) into TOUGH2-MP/FLAC3D simulator, which was developed for the prediction of the coupled thermo-hydro-mechanical behavior of bentonite buffer. And the calculated heater power, temperature, relative humidity, total stress, saturation, water content and dry density were compared with in situ data monitored in the various sections. In general, the calculated heater power and temperature provided a fairly good agreement with experimental observations, however, the difference between power of heater #1 and that of heater #2 could not captured in the numerical analysis. It is necessary to consider lamprophyre with low thermal conductivity around heater #1 and non-simplified installation progresses of bentonite blocks in the tunnel for better modeling results. The evolutions and distributions of relative humidity were well reproduced, but hydraulic model needs to be modified because the re-saturation process was relatively fast near the heaters. In case of stress evolutions due to the thermal and hydraulic expansions, the computed stress was in good agreement with the data. But, the stress is slightly higher than the measured in situ data at the early stage of the operation, because gap between rock mass and bentonite blocks have not been considered in the numerical simulations. The calculated distribution of saturation, water content, and dry density along the radial distance showed good agreement with the observations after the first and final dismantling. The calculated dry density near the center of the FEBEX tunnel and heaters were overestimated compared with the observations. As a result, the saturation and water content were underestimated with the measurements. Therefore, numerical model of permeability is needed to modify for the production of better numerical results. It will be possible to produce the better analysis results and more realistically predict the coupled THM behavior in the bentonite blocks by performing the additional studies and modifying the numerical model based on the results of this study.

• Economic and Environmental Geology
• /
• v.19 no.3
• /
• pp.199-218
• /
• 1986

Arsenopyrite in arsenic and polymetallic ores from calcic Fe-W skarn deposit of the Ulsan mine, Republic of Korea, has been investigated by means of electron microprobe analysis and X-ray diffractometry. As a result, it is revealed that the Ulsan arsenopyrite may be classified into the following three species with different generation on the basis of its mode of occurrence, chronological order during polymetallic mineralization and chemical composition; arsenopyrites I, II and III. 1) Arsenopyrite I-(Ni, Co)-bearing species belonging to the oldest generation, which has crystallized together with (Ni, Co)-arsenides and -sulpharsenides in the early stage of polymetallic mineralization. In rare cases, it contains a negligible amount of antimony. It occurs usually as discrete grains with irregular outline, showing rarely subhedral form, and is diffused in skarn zone. The maximum contents of nickel and cobalt are 10.04 Ni and 2.45 Co (in weight percent). Occasionally, it shows compositional zoning with narrow rim of lower (Ni+Co) content. 2) Arsenopyrite II-arsenian species, in which (Ni+Co) content is almost negligible, may occur widely in arsenic ores, and its crystallization has followed that of arsenopyrite I. It usually shows subhedral to euhedral form and is closely associated with $l{\ddot{o}}llingite$, bismuth, bismuthinite, chalcopyrite, sphalerite, bismuthian tennantite, etc. It is worthy of note that arsenopyrite II occasionally contains particles consisting of both bismuth and bismuthinite. 3) Arsenopyrite III-(Ni, Co)-free, S-excess and As-deficient species is close to the stoichiometric composition, FeAsS. It occurs in late hydrothermal veins, which cut clearly the Fe-W ore pipe and the surrounding skarn zone. It shows euhedral to subhedral form, being extremely coarse-grained, and is closely associated with pyrite, "primary" monoclinic pyrrhotite, galena, sphalerite, etc. Among three species of the Ulsan arsenopyrite, arsenopyrite I does not serve as a geothermometer, because (Ni+Co) content always exceeds 1 weight percent. In spite of the absence of Fe-S minerals as sulphur-buffer assemblage, the presence of $Bi(l)-Bi_2S_3$ sulphur-buffer enables arsenopyrite II to apply successfully to the estimation of either temperature and sulphur fugacity, the results are, $T=460{\sim}470^{\circ}C$, and log $f(S_2)=-7.4{\sim}7.0$. With reference to arsenopyrite III, only arsenopyrite coexisting with pyrite and "primary" monoclinic pyrrhotite may serve to restrict the range of both temperature and sulphur fugacity, $T=320{\sim}440^{\circ}C$, log $f(S_2)=-9.0{\sim}7.0$. These temperature data are consistent with those obtained by fluid inclusion geothermometry on late grandite garnet somewhat earlier than arsenopyrite II. At the beginning of this paper, the geological environments of the ore formation at Ulsan are considered from regional and local geologic settings, and physicochemical conditions are suspected, in particular the formation pressure (lithostatic pressure) is assumed to be 0.5kb (50MPa). The present study on arsenopyrite geothermometry, however, does not bring about any contradictions against the above premises. Thus, the following genetical view on the Ulsan ore deposit previously advocated by two of the present authors (Choi and Imai) becomes more evident; the ore deposit was formed at shallow depth and relatively high-temperature with steep geothermal gradient-xenothermal conditions.

• Korean Journal of Food Science and Technology
• /
• v.26 no.1
• /
• pp.6-11
• /
• 1994

A cyclodextrin glucanotransferase(CGTase)-producing Bacillus sp. I-5 was isolated from soil and the enzyme exhibited the maximum reaction rate at pH 8.0 and $50^{\circ}C$. It was found that CGTase of I-5 produced ${\beta}-$ and ${\gamma}-CD$ mainly but the production ratio of cyclodextrins (CDs) was influenced by the buffer solution. Sodium acetate significantly stimulated the formation of ${\gamma}-CD$, increasing the content by 35%. The production of CDs was influenced by DE value of starch. The results indicated that DE value in the range of $3.5{\sim}6.0$ were most effective for the CD formation. CGTase was immobilized on the reversibly soluble-insoluble carrier, hydroxypropyl mothylcellulose acetate succinate. The immobilized CGTase was soluble at pH 7.5, and precipitated easily at pH 6.0. Enzyme reactor was designed to produce CD continuously. It was composed of three major stages-CD produttion by immobilized CGTase, conversion of the residual dextrin to glucose by amylase and glucoamylase and alcohol fermentation by yeasts to remove the glucose into alcohol. The yield of total CDs was 3.65g from 10g soluble starch.

• Korean Journal of Microbiology
• /
• v.24 no.3
• /
• pp.243-250
• /
• 1986

Protoplast formation and regeneration from wild-type and auxotrophic mutants of Candida pseudotropicalis CBS 607 as well as fusion between complementary mutants were carried out. Frequencies of protoplast formation from wild-type and histidine or adenine requiring mutants ranged from 96 to 100% whereas those from methionine or tryptophan auxotrophs were 52 and 72%, respectively. When bovine serum albumin(4mg/ml, BSA) was added to protoplasting buffer for cells of methionine or tryptophan auxotrophs grown in a medium supplemented with myoinositol(0.5mg/ml), 96-99 % of cells were converted to protoplasts. Protoplasts were regenerated at the frequencies ranging from 18 to 20%. However, the addition of BSA to protoplasting buffer and the supplement of myoinositol to a medium of cell growth doubled the regeneration rate except adenine auxotroph in which such an improvement was not observed. It was found that optimal concentrations of polyethylene glycol and $CaCl_2$ are 20% and 100mM while optimal pH and exposure time are 6.0 and 30min. The fusion frequencies between complementary mutants ranged from $1.5{\times}10^{-3}\;to\;8.8{\times}10^{-3}$ and were enhanced by the improvement in the rate of protoplast regeneration. When histidine auxotroph was fused with tryptophan mutant, several fusion products were obtained which were found to be in the state of aneuploid or diploid, judging from DNA content and the presence of a large nucleus in the products.

• Korean Journal of Weed Science
• /
• v.10 no.3
• /
• pp.214-220
• /
• 1990

To establish a greening assay for screening, and physiological and biochemical studies of the compounds affecting biosynthesis of plant pigments, were conducted on environmental factors, and on ways of incubation and illumination which affect plant greening. Greening was good when both cucumber and barley were grown for 5 to 6 days at $25^{\circ}C$ in darkness, when adaxial sides of cucumber cotyledons were contacted with the solution, and when barley leaf fragments were taken 0.5 to 2.0cm from the leaf tip. Potassium phosphate buffer(pH 6.0) at 10mM was most desirable for plant greening. The speed of greening during illumination was increased as the temperature increased from $15^{\circ}C$ to $35^{\circ}C$. The responses were sensitive more in cucumber than in barley, and in chlorophyll biosynthesis than in carotenoid biosythesis. The content of chlorophyll was greatest at the light intensity of 5000 and 1000 lux for cucumber and barley, respectively, but the biosynthesis of carotenoids were greatest at the light intensity higher than for chlorophyll. In use of solvents for dissolving chemicals, acetone, ethyl alcohol and DMSO at 10, 0.1 and 2.5% or less, respectively, did not affect the biosynthesis of plant pigments. $pI_{50}$ values were calculated for chemicals affecting pigment biosynthesis.

• Applied Biological Chemistry
• /
• v.29 no.1
• /
• pp.51-56
• /
• 1986

Using milled barley of four varieties Olbori, Youngsan-bori, Sacheon 6, and Suwon 228, the barley proteins were fractionated by the Osborne method and the modified Osborne method. Two fractionation methods were compared. There was a steady increase in the amount of nitrogen extracted as NaCl concentration increased, reaching a maximum at 0.5M NaCl and the extraction of nitrogen by 0.5M NaCl reached a maximum at $22^{\circ}C$. Alcohol-soluble fraction was least extracted by 70% (v/v) ethanol at $4^{\circ}C$ and most by sequential extraction with 50% (v/v) propan-1-ol alone followed by 50% (v/v) propan-1-ol plus 3% (v/v) 2-mercaptoethanol. Nitrogen was least extracted between pH 4 and 6 and most extracted at higher pH than 10. The modified Osborne fractionation of the protein complex in the four barleys showed that the salt-soluble nitrogen accounted for 21,4% to 24.1%, hordein-I varied from 30.4% to 43.4%, hordein-II varied widely from 9.3% to 19.5% and borate buffer-soluble glutelin content ranged from 17.1% to 23.7%.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.2
• /
• pp.101-109
• /
• 2008

For the Kyungju bentonite which is considered as a candidate material for the buffer and backfill in the high-level waste repository, the thermal conductivities of compacted bentonite and a bentonite-sand mixture were measured. The thermal conductivities of the compacted bentonites with a dry density of 1.2 to $1.8\;Mg/m^3$ and the bentonite-sand mixture with a dry density of 1.6 and $1.8\;Mg/m^3$ were measured within the gravimetric water content range of 10wt% to 20wt% and the sand fraction range of 10 to 30wt%. The thermal conductivity of compacted bentonite and a bentonite-sand mixture increases with increasing dry density and sand weight fraction in the case of constant water weight fraction, and increases with increasing water weight fraction and sand weight fraction in the case of constant dry density. The empirical correlations to describe the thermal conductivity of compacted bentonite and a bentonite-sand mixture as a function of water fraction at each dry density were suggested. These correlations can predict the thermal conductivities of bentonite and a bentonite-sand mixture with a difference below 10%.