• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.2
• /
• pp.135-147
• /
• 2016

The buffer in geological disposal system is one of the major elements to restrain the release of radionuclide and to protect the container from the inflow of groundwater. The buffer material requires long-term stability, low hydraulic conductivity, low organic content, high retardation of radionuclide, high swelling pressure, and high thermal conductivity. These requirements could be determined by the quantitative analysis results. In case of South Korea, the bentonites produced in Gyeongju area have been regarded as candidate buffer/backfill materials at KAERI (Korea Atomic Energy Research Institute) since 1997. According to the study on several physical and chemical characteristics of domestic bentonite in the same district, this is the Ca-type bentonite with about 65% of montmorillonite content. Through this study, we present the criteria for the performance evaluation items and methods when collecting new buffer/backfill materials.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.1
• /
• pp.37-41
• /
• 2001

HPLC separation of ionic samples tends to be more complicated and difficult to understand than that of non-ionic compounds. On the other hand, band spacing is much more easily manipulated for ionic than for neutral samples. Ion-suppression RP-HPLC method was used with organic modifier and aqueous buffer solution. In this work, five mononucleotides of cytidine-5-monophosphate (5-CMP) disodium salt, uridine-5-monophosphate disodium salt (5-UMP), guanosine-5-monophosphate disodium salt (5-GMP), inosine-5-monophosphate disodium salt (5-IMP), and adenosine-5-monophosphate disodium salt (5-AMP) were examined. Acetic acid and sodium phosphate were used as buffers, and methanol as an organic modifier. A new relationship between the retention factor and the buffer concentration at a fixed modifier content (5% of methanol) could be expressed by following: K = (k(sub)-1 + k(sub)0 (k(sub)B/k(sub)S)/(1 + (k(sub)B/k(sub)S) C(sub)B(sup)a), where C(sub)B was the concentration of buffer. Using this relationship, the calculated values closely matched the experimental data. The derived relationship showed that as the buffer concentration increased, the retention factor approached a certain value, and this was buffer dependent.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.11
• /
• pp.7-14
• /
• 2019

The compacted bentonite buffer is one of the major components of an engineered barrier system (EBS) for the disposal of high-level radioactive waste (HLW), and it is considered the best candidate for the buffer material. The buffer is located between disposal canisters and near-field rock mass, and it interrupts the release of radionuclide from disposal canisters and protect them from the penetration of groundwater. At initial disposal condition, degree of saturation of the compacted bentonite buffer decreases because of high thermal quantities released from the disposal canisters. However, the degree of saturation of the compacted bentonite buffer gradually increases caused by inflow of groundwater. The saturated and unsaturated behavior of the buffer is a very important input data since it can determine the safety performance of EBS. Therefore, this paper investigated water retention capacity (WRC) for the Korean compacted bentonite buffer. The WRC of the compacted bentonite buffer was derived by measuring volumetric water content and water suction when temperature variation was between 24℃~125℃ considering decrease of degree of saturation with respect to temperature increase. The WRC was also derived with the same volumetric water content under the room temperature condition, and it showed 1~15% larger water suction than high temperature condition.

• Nuclear Engineering and Technology
• /
• v.34 no.1
• /
• pp.90-103
• /
• 2002

The thermal and mechanical properties of compacted bentonite and bentonite-sand mixture were collected from the literatures and compiled. The thermal conductivity of bentonite is found to increase almost linearly with increasing dry density and water content of the bentonite. The specific heat can also be expressed as a function of water ontent, and the coefficient of thermal expansion is almost independent on the dry density. The logarithm of unconfined compressive strength and Young’s modulus of elasticity increase linearly with increasing dry density, and in the case of constant dry density, it can be fitted to a second order polynomial of water content. Also the unconfined compressive strength and Young’s modulus of elasticity of the bentonite-sand mixture decreases with increasing sand content. The Poisson’s ratio remains constant at the dry density higher than 1.6 Mg/m$_3$, and the shear strength increases with increasing dry density.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.10
• /
• pp.5-11
• /
• 2021

The compacted bentonite buffer is one of the most important components in an engineered barrier system (EBS) to dispose of high-level radioactive waste (HLW) produced by nuclear power generation. The compacted bentonite buffer has a crucial role in protecting the disposal canister against the external impact and penetration of groundwater, so it has to satisfy the thermal-hydraulic-mechanical requirements. Even though there have been various researches on the investigation of thermal-hydraulic properties, few studies have been conducted to evaluate mechanical properties for the compacted bentonite buffer. For this reason, this paper conducted a series of unconfined compression tests and obtained mechanical properties such as unconfined compressive strength, elastic modulus, and void ratio of Korean compacted bentonite specimens with different water content and dry density values. The unconfined compressive strength and elastic modulus increased, and the Poisson's ratio decreased a little with increasing dry density. It showed that unconfined compressive strength and elastic modulus were proportional to dry density. However, there was not a remarkable correlation between mechanical properties and water content.

• KIISE Transactions on Computing Practices
• /
• v.21 no.1
• /
• pp.82-87
• /
• 2015

There are many current researches that are looking to improve the quality of HTTP adaptive streaming services. However, the existing schemes have a serious problem of QoE (Quality of Experience) degradation because few consider VBR video transmission. To cope with this problem, in this paper, we proposed a novel media quality adaptation scheme called CB-DASH (Content and Buffer-aware DASH). The proposed scheme controlled the video quality considering the VBR characteristics of video and the client's buffer state. Through the simulation, we proved that our scheme accomplished a more accurate estimated bandwidth than the conventional DASH and improved the QoE of streaming service.

• Archives of Pharmacal Research
• /
• v.4 no.1
• /
• pp.33-41
• /
• 1981

The prepared dextran sulfates were characterized by measuring the reduced viscosisty at five different concentrations to obtain an intrinsic viscosity in both phosphate and tris buffers, pH 7.4, ionic strength of 0.1 Dextran sulfates having 0.81, 1.06 sulfate groups per hexose unit have reduced viscosity value below 40 ml/g whereas dextran sulfates having 1.21, 1.43, 1.69 sulfate groups per hexose unit have reduced viscosity value over 40 ml/g. Dextran sulfate having 1.21 sulfate groups per hexose unit had highest value of reduced viscosity. The reduced viscosity of dextran sulfate in tris buffer was always higher than that in phosphate buffer regardless of the sulfate content of dextran sulfate. The influence of the sulfation of the dextran sulfate. The influence of the sulfation of the dextran sulfate molecule on the dextran sulfate-LDL interaction was studied with three different dextran sulfate molecules. Dextran sulfate molecules having more than one sulfate group per hexose unit. The dextran sulfate having 0.81 sulfate groups per hexose unit showed considerably different precipitation curves in phosphate and tris buffers. This peculiar behavior of dextran sulfate having 0.81 sulfate groups per hexose unit in the two buffer systems was not noticed with dextran sulfate having more than one noticed with dextran sulfate having more than one sulfate group per hexose unit.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.128-131
• /
• 2003

To clarify the effect of soil property on the EK-Fenton remediation of the soil contaminated with phenanthrene, this research had been conducted. In the experiments using EPK kaolinite, the $H_2O$$_2$ stability and effect of phenanthrene treatment improved more than that in the experiments using Hadong clayey soil. The results signify that Fe oxide content and acid buffer capacity significantly affected the fate of $H_2O$$_2$ and phenanthrene during the EK-Fenton process.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2014

Phosphoric acid was used as etching agent instead of conventional peroxide - based chemicals for forming pattern of ultra definition display. Etchant was synthesized by mixing etching agent, oxidation agent, buffer solution, and additive into solvent, deionized water. Thicknesses of copper, main metal of ultra definition display, for etching, were 10,000 and $30,000{{\AA}}$. Etch stop of good low skew for proper pattern formation has been occurred at the content ratio of phosphoric acid 60 - 64%, nitric acid 4 - 5%, additive(potassium acetate) 1 - 3%. Buffer solution(acetic acid) decreased the metal contact angle $63.07^{\circ}$ to $42.49^{\circ}$ for benefiting pattern formation. Content variations on four components (phosphoric acid, nitric acid, acetic acid, potassium acetic acid) of the etchant with storage time were within 3 wt% after 24 hrs of etching work.

• Journal of Plant Biology
• /
• v.29 no.2
• /
• pp.85-94
• /
• 1986

Canavanine content of the cotyledons of Canavalia lineata decreased gradually during germination and growth of seedlings but continued to increase in roots and leaves. After abscission of cotyledons, canavanine content of leaves depleted competely. The activity of canavanase could be detected in leaves and roots, but not in cotyledons. High arginase activity was observed in the cotyledons of seeds at the earlyimbibition period. During the growth of seedlings, cotyledonary canavanine appeared to be transported to the growing of seedlings where it could be utilized through nitrogen metabolic pathways. In crude cell-free extracts of leaves, maximum activities of canavanase or arginase appeared in 30mM Tris-HCl buffer (pH 9.0) or 30mM NaHCO3 buffer (pH 10.0), respectively. The activities of these two enzymes differed from each other when treated with Co2+ or Mn2+. These results support the idea that canavanase and arginase might be different enzymes.