• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.3
• /
• pp.311-315
• /
• 2008

The switching fabric used to make high speed switching for packet transfer between input and output interface in recent internet environments. Without making any changes in order to remain ATM switching fabric, the existing structures should split/reassemble a packet to certain size, set aside cross-point buffer and will put loads on the system. In this paper, we proposed a new switch architecture, which has separated data memory plane and switching plane packet data will be stored on the separate memory structure and simultaneously only the part of the memory address pointers can pass the switching fabric. The small mini packets which have address pointer and basic information would be passed through the switching fabric. It is possible to achieve the remarkable switching performance than other switch fabrics with contending variable length packets.

• Journal of environmental and Sanitary engineering
• /
• v.23 no.4
• /
• pp.37-44
• /
• 2008

In this study we developed the analytical methods for the determination of three neurotoxin; anatoxin-a, saxitoxin and neosaxitoxin using HPLC/FLD system and this analytical methods were applied to real sample; algae culture and algae extracts. For the HPLC/FLD analysis of anatoxin-a samples were concentrated on WCX(Weak Cation Exchanger) SPE and then anatoxin-a in concentrate was derivatized with NBD-F solution. Supernatant was injected on HPLC system. For the HPLC/FLD analysis of saxitoxin and neosaxitoxin samples were separated on the column and then derivatizied by post column reactor for fluorescen detection. For post column reaction of saxitoxin we feed two kinds of reaction solution; Oxidizing Reagent of which composition was periodic acid(7mM) in 50mM potassium phosphate buffer, pH 9 and acidifying reagent of which Composition was 0.5M acetic acid. The LOD value for anatoxin-a, saxitoxin and neosaxitoxin in HPLC/FLD method was 24.3 ng. $35{\mu}g/L$, $27{\mu}g/L$ respectively. We determined the anatoxin-a content of lyophilized anabaena flos-aquae and $20{\mu}g/g$ d.w. of anatoxin-a was detected. We analyzed saxitoxin and neosaxitoxin in algae culture media and extracts of lypopyllized algal cell cultured and that of Deachung reservior. Saxitoxin and neosaxitoxin in real sample were below the limit of detection. Although there are various water treatment processes for removing neurotoxins were suggested no process give simultaneous and complete removal of neurotoxins. It was cocluded that nanofiltration which reject material by size can be a process for removal of neurotoxins.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.139-150
• /
• 1997

For high-speed networks, a new ring protocal is proposed in this paper. A ring network combined with destination removal can achieve much higher network throughput than the channel transmission rate. However, such a network exhibits fairness problems. Over a past few years, global fairness algorithms such as ATMR and Metaring have been proposed to solve such problems. But the ring access time delay and fairness in such networks are sensitive to the network parameters such as network size and traffic distribution. In addition to guaranteeing fair ring access to all nodes, there are several other important performance aspects in such networks. The one is that fairness is enforced while node throughputs are kept as high as possible. And another performance measure is access delay and more specifically Head-Of-Line(HOL) delay, i.e., the amount of time the first cell in the transmission buffer of a node has to wait before it accesses the ring. HOL delay is a mijor component in the transmission jitter of the synchronous traffic transmission. A key idea of the proposed ring protocol is to find the nodes that have much more chances to access the ring than any other nodes in the independently distributed node architecture. Since destined by many cells need to share a part of the bandwidths with the next node for the fairness in as much as performance degradation does not become critical. To investigate the performance behavior of the proposed ring protocol for various network condition,s several performance parameters wuch as ring access time delay, and throughput are compared with those of the ATMR and Metaring protocols using simulation package, SIMAN.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.12B
• /
• pp.838-846
• /
• 2005

In this paper, we consider the following two issues for implementing the synchronous Ethernet systems. First, a synchronous Ethernet system employs a fixed size superframe which is divided into a synchronous period and an asynchronous one. We note that the starting point of a superframe is not deterministic when an ordinary data frame's transmission is overlapped the superframe boundary. This overlap may be a fatal drawback for strict jitter bounded applications. Circumventing the problem, we propose a frame fragmentation scheme to provide a zero jitter, and compare its delay performance with the hold scheme which also provides the zero jitter. We next concern that IEEE 802.3x pause frames cannot be promptly transmitted in a synchronous period, and thus asynchronous traffics may be dramatically get dropped at the input buffer of a switch. To handle the problem, we propose an efficient flow control by allowing the transmission of the pause frame in a synchronous period, and investigate the blocking probability of the asynchronous traffics by the simulation.

• Journal of Internet Computing and Services
• /
• v.3 no.3
• /
• pp.67-74
• /
• 2002

Asynchronous transfer mode (ATM) can be efficiently used to transport packet data services. The switching system will support voice and packet data services simultaneously from end to end applications. To guarantee quality of service (QoS) of the offered services, source rate to send packet data is needed to control the network overload condition. Most existing control algorithms are shown to provide the threshold-based feedback control technique. However, real-time voice calls can be dynamically connected and released during data services in the network. If the feedback control information delays, quality of the serviced voice can be degraded due to a time delay between source and destination in the high speed link, An adaptive algorithm based on the optimal least mean square error technique is presented for the predictive feedback control technique. The algorithm attempts to predict a future buffer size from weight (slope) adaptation of unknown functions, which are used for feedback control. Simulation results are presented, which show the effectiveness of the algorithm.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.4
• /
• pp.335-340
• /
• 2005

The forward dissolution rate of a borosilicate waste glass was determined as an interlaboratory study(ILS) testing program for the evaluation of precision in the measurement of the dissolution rate or a waste glass using a single-pass flow-through(SPFT) test, whose conducting practice has been written for standardization through American Society for Testing and Materials (ASTM). A simulated low-activity waste glass powder with a size of 100/200 mesh was dissolved by lithium buffer solution (pH=10) at 70? under Ar atmosphere. By plotting the dissolution rates as a function of silicon and boron concentration in eluate, the forward dissolution rate of the glass was obtained as about $2.7\times10^{-5}g{\cdot}m{\cdot}s^{-1}$ in our laboratory.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.2
• /
• pp.73-83
• /
• 1994

Applications of liposomes as a drug carrier for the oral delivery of poorly-absorbable macromolecular drugs have been limited, because of their instability in gastrointestinal environments including pH, bile salts, and digestive enzymes. Two polysaccharides, dextran(DX) and pullulan(PL), were introduced to the preformed liposomes in order to enhance the stability. Palmitoyl derivatives of polysaccharides, palmitoyldextran(PalDX) and palmitoylpullulan(PalPL), were synthesizd and introduced to the liposomes during preparation for the same purpose of stability. The effects of these polysaccharides coating were evaluated basically by physical properties of particle size distribution and optical microscopy, then compared with uncoated liposomes by the observations of both in vitro stability and in vovo absorption characteristics. The geometric mean diameters of polysaccharide-coated liposomes were greater than that of uncoated liposome, showing the outermost polysaccharide-coated layer under the optical microscopy. In vitro stabilities of uncoated or polysaccharides-coated liposomes were measured by turbidity changes in various pH buffer solutions containing sodium choleate as bile salts. While uncoated liposome was very sensitive to bile salts, polysaccharides-coated liposomes were stable in relatively higher concentrations of sodium choleate, giving the results of better stability of PalDX- and PalPL-coated liposomes than that of DX- and PL-coated liposomes. After liposomal encapsulation of acyclovir(ACV), an antiviral agent as a model drug, it has been administered orally to rats as dose of ACV 40 mg/kg. Plasma concentrations of ACV were assayed by HPLC and analyzed by model-independent pharmacokinetics. Pharmacokinetic parameters of Cmax, tmax, and [AUC] have been compared.

• Proceedings of the KSAR Conference
• /
• 2001.10a
• /
• pp.57-57
• /
• 2001

This study was carried out to investigate the general characteristics such as volume, sperm concentration, sperm motility, sperm abnormality on whole semen, RSP-S and RSP-T semen and fractional semen of small size dogs, and the effect of temperature and preservation time and cryoproservation on motility of whole and RSP-S and RSP- T semen. Multiple ejaculates were collected from small dogs by the digital manipulation of penis. 1. The volume per ejaculate semen, sperm of concentration and motility and abnormal sperm rate of 1st fractional semen were 0.65±0.09㎖, 4.52±0.35×10/sup 6/ cells/㎖, 15.64±3.85% and 5.50±0.62%. Also, 2nd fractional semen were 1.25±0.20㎖, 3.35±0.48×10/sup 6/cells/㎖, 96.25±4.65% and 4.24±0.46%. And 3rd fractional semen were 1.45±0.21㎖, 3.85±0.52×10/sup 6/cell/㎖, 92.82±4.24% and 4.66±0.58%, respectively. 2. The sperm of concentration and motility and abnormal sperm rates of whole, RSP-S and RSP-T semen were 5.45±0.82×10/sup 6/ cells/㎖, 95.55±4.65%, 4.58±0.45% and 4.82±0.36×10/sup 6/cells/㎖, 90.10±3.42%, 6.48±0.68% and 4.55±0.45× 10/sup 6/cells/㎖, 93.25±3.85%, 4.82±0.58%, respectively. 3. The motility of whole, RSP-S and RSP-T semen were higher at 4℃ than at 38℃. When preservation temperature was at 4℃, survival rates of RSP-S and RSP-T sperm were 97.54%-6.25% at 1-72 hrs, 97.40%-5.62% at 1-100 hrs, respectively. 4. The survival rates of slow and rapid frozen 2nd fraction, RSP-S and RSP-T semen were 67.3±4.45%, 88.8±4.46% and 46.4±3.84%, 74.4±4.20%, respectively. Survival rates was significantly higher in frozen RSP-S and RSP-T semen than that in control group(8.5±2.12%).

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.150-158
• /
• 1998

Limit dextrin of Korean beer(3 brands) and Japanese beer(21 brands) were separated by ethanol fractionation. Limit dextrin of Korean and Japanese beer was estimated to be 1.1%. 1H-NMR analysis revealed that the limit dextrin showed both signal of $\alpha$-1, 4- and $\alpha$-1, 6- glucosidic linkage with its estimation ratio of average 5.5:1. Limit dextrin was hydrolyzed to glucose with the yield of 57.22% by Aspergillus awamori $\alpha$-glucosidase(24.7 unit) plus human salivay $\alpha$-amylase(2.4 unit) in 100${mu}ell$ of 0.043M acetate buffer at 37$^{\circ}C$ for 5 hour. Among them, limit dextrin of Korean beer showed the highest hydrolysis rate of 76%. Small size sugars (64.8%) removed by ethanol fractionation and limit dextrin(21.4%) hydrolyzed by amylases that is digestable sugar. Non hydrolyzed limit dextrin(13.8%) by the amylases which can be a growth factor of Bifidobacterium in human intestine.

• Journal of Embryo Transfer
• /
• v.27 no.1
• /
• pp.37-43
• /
• 2012

This study evaluated a method of sorting X and Y chromosomes based on size using the forward angle light scatter related refractive index (FSC) of a flow cytometer. Hanwoo bulls sperm were separated to X and Y chromosomes by the parameters of FSC or Hoechst 33342 intensity. As a result, using monitor program linked flow cytometry during sorting processing, the purities were $97{\pm}0.57$ or $96{\pm}0.67%$ for the X-fraction and $96{\pm}0.33$ or $97{\pm}1.33%$ for the Y-fraction in the two sperm sorting methods. There were no differences in the X and Y ratios (X and Y %) between the sperm sorting methods based on FSC or DNA content. The proportions of female and male embryos used for in vitro fertilization and development were $66.03{\pm}3.31$ or $69.37{\pm}1.41%$, and $70.56{\pm}2.42$ or $56.11{\pm}3.09%$ when sperm were processed using the sex sorting method by FSC or Hoechst 33342. In conclusion, further study is needed to determine the optimum procedure and improve the nozzle to enhancing sorting accuracy or efficiency. Also, the findings of this study do not negate the possibility that the difference method of sperm sorting cannot use a UV laser beam.