• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.41-48
• /
• 1992

The characteristics of traveling-wave electrodes for high-frequency electroptic integrated devices are described from the view point of improvement of phase-matching based on the conformal mapping method. Specific calculations of the characteristic impedance, effective microwave index, and eletrode loss for asymmetric coplanar strip(ACPS) and coplanar waveguide(CPW) electrode structures are presented as a function of the geometric electrode parameters including the electrode thickness and buffer layer thickness. 5-10(x10S0-6Tm) thick Au-ACPS electrodes were successfully fabricated by electroplating and ECR etcher. The improvement of modulation bandwidth can be theoretically observed from the combination of electrode and buffer layer thickness.

• Communications of the Korean Mathematical Society
• /
• v.14 no.2
• /
• pp.405-423
• /
• 1999

We consider a statistical multiplexer model with finite buffer capacity and finite number of independent identical 3-state bursty voice sources. The burstiness of the sources is modeled by describing both two different active periods (at the rate of one packet perslot) and the passive periods during which no packets are generated. Assuming a mixture of two geometric distributions for active period and a geometric distribution for passive period and geometric distribution for passive period, we derive the recursive algorithm for the probability mass function of the buffer contents (in packets). We also obtain loss probability and the distribution of packet delay. Numerical results show that the system performance deteriorates considerably as the variance of the active period increases. Also, we see that the loss probability of 2-state Markov models is less than that of 3-state Markov models.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.1
• /
• pp.47-53
• /
• 2003

An experimental study on the chromatographic separation of maltopentaose from a mixture, including glucose, maltose, maltotriose, and maltopentaose, was carried out in a nonionic polymeric sorbent column while varying the operating conditions, such as the solution pH, buffer contents, and isopropyl alcohol (1PA) concentration. Unlike the pH and buffer contents, the IPA concentration had a Significant impact on the single component chromatograms for maltopentaose. The retention times of the maltooligosaccharides with the nonionic polymeric sorbent Sp207 were in the following order: glucose < maltose < maltotriose < maltopentaose. From the experimental binary, ternary, and quaternary chromatograms, gradient chromatographic separation with a changing IPA concentration as a function of time was required to obtain high-purity maltopentaose and reduce the elution time.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.69-72
• /
• 1997

The pH of microbial culture medium was calculated from equations of equilibrium, meterial balances for ionic components and electro-neutrality theory. Ammonium ion consumption and Acetic acid production are found out to be the major contributors for the alteration of the pH as well as the buffer capacity of the medium. By measuring the buffer capacity on-line, levels of acetic acid were estimated by a software sensor using pH signal in a fermentation process of E.coli growing in a minimal medium. The measured values of acetic acid showed good correlation to those of estimated by the software sensor.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.3
• /
• pp.17-31
• /
• 2007

In this paper, we consider a service system with bi-functional servers, which can switch between the primary service room and the secondary room. A service policy is characterized by the switching paints which depend on the queue length in the primary service room and the service level requirement constraint of the secondary room. The primary service room is modeled as a Markovian queueing system and the throughput of the primary service room is function of the total number of bi-functional servers. the buffer capacity of the primary service room, and the service policy. There is a revenue obtained from throughput and costs due to servers and buffers. We study the problem of simuitaneously determining the optimal number of servers, buffer capacity, and service policy to maximize profit of the service system, and develop an algorithm which can be successfully applied with the small number of computations.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.93-100
• /
• 2003

Population concentration phenomenon of city needs large-scale ride, and It is important elements that develop the circumference but, it is difficult to evaluate effects that ride gets land utilization change. Therefore, this research evaluates change and effect of land utilization as political to subway station that is main ride of Seoul City, and chose standard and position for right place arrangement of electric railway station. Research contents analyzed subway station effect area interior and external land utilization change taking advantage of GIS's buffer function and RS's classification technique, and decide precedence at subway station establishment and chose position of subway station for effect area outside area.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.1
• /
• pp.35-44
• /
• 2001

Today's environment of enterprise is changing. They have to face customers' demands with the right product, the right service and supply them at the right time. And aIso cut down logistics and inventory cost and bring up the Profit as much as they can. This means the change of putting enterprise first in importance to putting customer first in importance. therefore to correspond to customer's demand, shorting lead time is becoming a essential condition. The answer to this changes of environment is supply chain management In this study, we use Goldratt's drum-buffer-rope scheduling in between manufacturer and supplier. And when shortage of inventory occur, search for the supply chain's CCR. Pressing CCR for more production, and supply Inventory from logistic center to guide for inventory buffing. using logistic warehouse between manufacturer and supplier, can execute function of buffer.

• Nuclear Engineering and Technology
• /
• v.34 no.1
• /
• pp.90-103
• /
• 2002

The thermal and mechanical properties of compacted bentonite and bentonite-sand mixture were collected from the literatures and compiled. The thermal conductivity of bentonite is found to increase almost linearly with increasing dry density and water content of the bentonite. The specific heat can also be expressed as a function of water ontent, and the coefficient of thermal expansion is almost independent on the dry density. The logarithm of unconfined compressive strength and Young’s modulus of elasticity increase linearly with increasing dry density, and in the case of constant dry density, it can be fitted to a second order polynomial of water content. Also the unconfined compressive strength and Young’s modulus of elasticity of the bentonite-sand mixture decreases with increasing sand content. The Poisson’s ratio remains constant at the dry density higher than 1.6 Mg/m$_3$, and the shear strength increases with increasing dry density.

• Journal of Industrial Convergence
• /
• v.3 no.1
• /
• pp.19-31
• /
• 2005

This paper deals with the sequencing problem in the operation of the manufacturing systems with the constraint of buffer capacity. Some of studies for this theme have been progressed for several years. And then most of them considered only one objective, such as maximum lateness, machine utilization, makespan, mean flowtime and so on. This study deal with two objectives of the delivery for customers and the idle time of machines for producers. For the decision of sequence, the utility function is used. The developed heuristic algorithm presents a good solution. Through a numerical example, the procedures of the job sequencing is explained.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.69-75
• /
• 2009

This research regard it as most meaningful to realize the importance of the hedgerow in cultivated areas functioning as a residual landscape element in rural landscape and set improvement guidelines through landscape character and value analysis to cope with landscape malfunction. The results of summary are as follows. 1) First of all, as a result of landscape character analysis of edge stripe in cultivated land in total of 7 case areas, for example, the edge stripe in cultivated land in case area 4 and 8 maintain the width of 10m and are assessed satisfactory in terms of vegetation development condition, appearance of living species, connectivity, buffer capacity and so on. Also, as a result of structural character of correlation analysis among items, the correlation coefficient between width and appearance of living species showed 0.941, the highest. Following are connectivity and appearance of living species and width and buffer capacity respectively: 0.841 and 0.740. 2) As a result of landscape character analysis of uncultivated stripe in total of 6 case areas, it is analyzed that case area 4 maintains the widest width as almost 4.5m average width and considered valuable as I degree in vegetation development condition, filtering, and connectivity. 3) As a result of problem analysis of uncultivated stripe, for example, case 3, 9, and 10 was analyzed that the width was below 1.25m which is too small to carry out the function of buffer and habitat for living creature, so minimum standard width was set between 4~5m through comprehensive analysis of character of each case area. Based on the result above landscape character, value and problem analysis, main improvement guidelines are set in terms of width, connectivity, filtering, and vegetation development, restrictive practices and so on.