• Imaging Science in Dentistry
• /
• 제37권4호
• /
• pp.217-220
• /
• 2007

Purpose: The purpose of this study was to compare the location of the mandibular canal in Class III malocclusion to its location in normal occlusion for adults. Materials and Methods: For this study 32 skeletal Class III patients and 26 normal patients were observed. Four measurements were taken on cross sectional tomography between the first and second molars: the distance from the mandibular canal to the inner surface of both the buccal and lingual cortices, the distance from the mandibular canal to the inferior border of the mandible, and the buccolingual width of the mandible. The buccolingual location of the canals was classified as lingual, central, or buccal. Each measurement was analyzed with an independent t test to compare Class III malocclusion to normal occlusion. Results: Compared to the control group, the prognathic group had a shorter distance from the canal to the inner surface of the lingual cortex and to the base of the mandible. A higher percentage of the canals were located lingually in the prognathic group. Conclusion: This study showed that the mandibular canal was located more lingually and inferiorly in prognathic patients than in patients with normal occlusion. These results could help surgeons to reduce injuries to the inferior alveolar nerve.

• The Journal of Advanced Prosthodontics
• /
• 제13권1호
• /
• pp.36-45
• /
• 2021

Purpose. To investigate the fracture resistance of monolithic CAD-CAM all-ceramic surveyed crowns with two different occlusal rest seat designs. Materials and Methods. Two maxillary first premolar were prepared for all-ceramic surveyed crowns with wide (2/3rd of buccolingual width of an unprepared tooth) or narrow (1/3rd of buccolingual width of an unprepared tooth) disto-occlusal rest seat (ORS) designs. Eighty monolithic CAD-CAM all-ceramic surveyed crowns were prepared and divided into 4 groups - Group CR, Composite resin material as a control; Group LDS, Lithium disilicate based material; Group ZIPS, zirconia-material (IPS ZirCAD); and Group ZLHT, zirconia- material (CeramillZolidht+). Crowns were cemented on an epoxy resin die with adhesive resin cement. The fracture resistance of crowns was tested with the universal machine. Univariate regression analysis was used. Results. The mean ± standard deviation of maximum failure force values varied from 3476.10 ± 285.97 N for the narrow ORS subgroup of group ZIPS to 687.89 ± 167.63 N for the wide ORS subgroup of group CR. The mean ± standard deviation of maximum force was 1075 ± 77.0 N for group CR, 1309.3 ± 283.9 N for group LDS, 3476.1 ± 285.97 N for group ZIPS, and 2666.7 ± 228.21 N for group ZLHT, with narrow occlusal rest seat design. The results of the intergroup comparison showed significant differences in fracture strength with various material groups and occlusal rest seat designs (P<.001). Conclusion. The zirconia-based all-ceramic surveyed crowns fractured at more than double the load of Lithium disilicate based crowns. The crowns with narrow base occlusal rest seat design had statistically significantly higher fracture resistance than surveyed crowns with wide occlusal rest seat design. The use of narrow occlusal rest seat design in CAD-CAM all ceramic surveyed crowns provides higher fracture resistance, and therefore narrow occlusal rest design can be used for providing esthetics with high strength.

• 대한치과의사협회지
• /
• 제21권5호통권168호
• /
• pp.415-423
• /
• 1983

A total of 202 full coverage crowns from 31 patients was investigated to find out the relationships between crown contour and gingival response. Every experimental crown has its contralateral natural tooth for its control group. Gingival Index and buccolingual width of the crowns were measured on both experimental and control group. Following conclusions were obtained from the study. 1. Most of the crown restorations were overcontoured and the increments were servere at cervical and height of contour area. 2. Height of contour and contact point of the restored crown were located near cervical area. Besides, most crowns had narrow embrasure with wide contact area. 3. Gingival Index around crown restorations was significantly larger than that of control group. 4. the interrelationship between Gingival Index and restored material or restored period was not verified at 5% significant level. 5. When grouping the artificial crowns into overcontoured, normal contoured, and undercontoured group by their width increment, the gingival inflammation was the severest in the overcontoured group and the mildest in the undercontoured group.

• 대한치과의사협회지
• /
• 제40권9호통권400호
• /
• pp.709-715
• /
• 2002

Two patients with sufficient vertical bone height but insufficient bone width in the anterior mandibular edentulous area, less than 6mm in the buccolingual aspect, for implant placement were chosen for treatment with a ridge splitting procedure. The surgical technique involving greenstick fracture is described. This ridge splitting procedure could be simple placement of implants into ideal restorable positions in severely atrophic, knife-edged ridges and predictable for narrow edentulous alveolar ridge augmentation associated with implant placement. We experienced two cases to place implant with insufficient bone width in the anterior mandibular edentulous area for overdenture be ridge splitting technique. Thus, we will report two cases and review of the literature.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.242-255
• /
• 1999

The purpose of this study was to estimate the morphology and the size of permanent mandibular molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study The subjects were taken impression to make study model. On the study model, the 5 dentists measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. The clinical crown height, width, thickness and the other anatomical structures had symmetrical relationship between the left and right mandibular molar. 2. In the clinical crown height aspect, the buccal crown heights always were higher than the lingual crown height. The heights of the each surface, the buccal or lingual surface, were gradually decreased from the 1st molar to the 2nd molar and the difference on the buccal surface was higher than that on the lingual surface. 3. In the clinical crown width aspect, the mesiodistal measurement of the mandibular 1st molar was higher than that of the mandibular 2st molar. 4. In the clinical crown thickness aspect, the mesial buccolingual measurement was highest on the mandibular 1st molar and the distal buccolingual distance was lowest on the mandibular 2nd molar. This distal thickness of the mandibular molar always was higher than that of the mesial half. 5. The well-developed mesiobuccal groove of the 1st molar was observed more often than that of the 2nd molar. The buccal pit was also observed more frequently at the 1st molar, but the frequency(35%) was not high. 6. The occlusal type according to the number of cusp was almost 5-cusp(98%) in the 1st molar and was also 5-cusp(63%) in the 2nd molar. The frequency of the 6th cusp was 31% in the 1st molar and was 22% in the 2nd molar. The frequency of the 7th cusp was below 2of in the both teeth. 7. In the buccolingual intercuspal distance aspect of the mesial and distal half, the intercuspal distance of distal half was higher than that of the mesial half on the 1st and 2nd molar, but the difference on the 1st molar was higher than that on the 2nd molar. 8. The difference between the widths of the buccal and lingual half was 1.5mm in the 1st molar and 0.8mm in the 2nd molar. Therefore the lingual convergency of the occlusal surface was more higher in the 1st molar. 9. On the mandibular 1st and 2nd molar, the distobuccal external angle was more acute than the mesiobuccal external angle. But the mesiobuccal internal angle was more acute than the distobuccal internal angle. 10. When the mandibular molar was a 5-cusp type, the development of the distal cusp on the 1st molar was better than that on the 2nd molar. The difference between the cusps was around 0.4mm.

• 대한치과교정학회지
• /
• 제40권5호
• /
• pp.314-324
• /
• 2010

본 연구는 성인 환자를 대상으로 안면골의 수평적, 수직적 골격 형태에 따른 하악 전치부 치조골의 순설측 두께를 하악 전치 치축을 기준으로 계측하고, 하악 이부 치조골의 단면적을 비교해 형태학적 차이를 확인해 보기 위하여 시행되었다. 20세 이상 성인 환자들의 초진 시 측모두부 방사선 사진을 사용하여, 수평적, 수직적 분류 기준에 따라 9군으로 분류하여 무작위로 30명(남자 15명, 여자 15명)씩, 총 270명을 추출하였다. 수평적 골격 형태를 판단하는 기준으로 ANB 각도가 사용되었으며, 수직적 골격 형태를 판단하는 기준으로는 하악평면각(SN-MP 각도)을 사용하였다. 측모두부 방사선 사진에서 하악 전치부 치조골의 협설측 두께와 하악 이부 치조골의 단면적을 계측하여 형태학적 차이를 확인해 보았다. 연구 결과로 high angle group은 low angle group과 average group에 비해 CEJ 하방 2 mm 부위 아래의 협설측 치조골과 모든 부위의 설측 치조골에서 통계적으로 유의하게 얇은 두께를 보였으며 ($p$ < 0.05), low angle group과 average group 중에서 Class I, II group은 모든 부위에서 Class I average group에 비해 유사하거나 통계적으로 유의하게 두꺼운 치조골 두께를 보였다 ($p$ < 0.05). Average group 내에서 Class III group은 Class I, II group에 비해 치근 중간 부위의 협설측과 설측에서 통계적으로 유의하게 얇은 치조골 두께를 보였으며 ($p$ < 0.05), high angle group 중에서도 특히 Class III인 high angle group에서 더 얇은 평균 치조골 두께를 보였다. 수직적 안면 골격 형태에 따라 하악 이부 치조골의 단면적은 통계적으로 유의한 차이를 보이지 않았다 ($p$ > 0.05). 이상의 결과에서 성인의 교정 치료 시 Class III이면서도 high angle을 보이는 환자에서는 하악 전치부에서 얇은 치조골 두께를 가지게 되는 경우가 많으므로, 하악 전치의 위치를 결정할 때 주의를 기울여야 할 것으로 생각한다.

• 대한치과교정학회지
• /
• 제46권6호
• /
• pp.379-385
• /
• 2016

Objective: Forced eruption has been proposed for the reconstruction of deficient bone and soft tissue. The aim of this study was to examine the changes in the alveolar ridge width and the vertical levels of the interproximal bone and papilla following forced eruption. Methods: Patients whose hopeless maxillary anterior teeth were expected to undergo severe bone resorption and soft tissue recession upon extraction were recruited. In addition, patients whose maxillary anterior teeth required forced eruption for restoration due to tooth fracture or dental caries were included. Before and after forced eruption, the interproximal bone height was measured by radiographic analysis, and changes in the alveolar ridge width and the interproximal papilla height were measured with an acrylic stent. Results: This prospective study demonstrated that the levels of the interproximal alveolar bone and papilla were significantly increased by 1.36 mm and 1.09 mm, respectively, in the vertical direction. However, the alveolar ridge width was significantly reduced by an average of 0.67 mm in the buccolingual direction. The changes in the level of the interproximal alveolar bone and papilla were positively correlated. Conclusions: Although the levels of the interproximal bone and papilla were significantly increased, the alveolar ridge width was significantly decreased following forced eruption. There was a modest positive and significant correlation between the changes in the height of the interproximal alveolar bone and the papilla. Based on our findings, modification of vertical forced eruption should be considered when augmentation of the alveolar ridge width is required.

• Imaging Science in Dentistry
• /
• 제37권3호
• /
• pp.171-180
• /
• 2007

The role of radiographic imaging in determining the size, numbers and the position of implants is very important. To perform the implant procedure, the dentist needs to evaluate the bone pathology and bone density, and to know the precise height, width, and contour of the alveolar process, as well as its relationship to the maxillary sinus and mandibular canal. The author analyzed 3 implant cases for treatment planning with the cone beam CT. All axial, panoramic, serial and buccolingual-sectioned images of 3 cases with stent including vertical marker were taken by using Mercuray (Hitachi, Japan). When the curved line drawn intentionally did not include dot image of a vertical marker on the axial image of CBCT, the image of the vertical marker was deformed on its buccolingually sectioned image. There was wide discrepancy in inclination between the alveolar bone and tooth on buccolingually sectioned image.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.553-553
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.562.2-562
• /
• 2001

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determined as follows. The teeth were radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal.(omitted)