• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.2
• /
• pp.109-113
• /
• 2011

Introduction: To correct the facial asymmetry by mandibular jaw surgery, it is important to know the anatomy of the mandible including the mandibular canal positioning of patients with facial asymmetry. This study was performed to evaluate the differences in the cross-sectional surface in the body of the mandible between the deviated side and opposite side in patients with facial asymmetry. Materials and Methods: The study was conducted on 37 adult patients composed of 2 groups, the asymmetry group (n=20) and non-asymmetry group (n=17). Using the cross-sectional computed tomography (CT) images, the distance from the buccal aspect of the mandibular canal to the outer aspect of the buccal cortex, distance from the buccal aspect of the mandibular canal to the inner aspect of the buccal cortex, distance from the inferior aspect of the mandibular canal to the inferior border of the mandible, thickness of the mandible, and cross-sectional surface area of the mandible were measured in each side of the mandible Results: The cross-sectional area of the mandible including the mandibular canal positioning in the deviated side was not statistically different from the opposite side in the asymmetry group. Only the distance from the inferior aspect of the mandibular canal to the inferior border of the mandible in the ramus area of the deviated side was significantly longer than opposite side. On the other hand, the bucco-lingual width of the asymmetry group was thinner than the non-asymmetry group. Conclusion: The cross-sectional area including the mandibular canal of the mandible did not appear to be modified by the facial asymmetry.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.159-169
• /
• 1993

The thirty six mandibular second molars, which were extracted because of hopeless tooth due to advanced periodontal disease, were measured the length of mesial and distal root and the distance from cementoenamel junction to root separation. The molars were cross-sectioned every 1.5 milimeter from cementoenamel junction to root apex perpendicular to long axis and each section was photographed, projected and measured with a calibrated Digital Curvi-Meter(Com Curvi-8. Japan). The root surface area (RSA), percentage of the RSA and the linear variation of the RSA were calibrated for each 1. 5 mm section. The results were as follows. 1. The mean length of the roots was 12. 98mm for mesial root, 11.84 mm for distal root. The mesial root was longer than distal root.(p<0.01) 2. The mean distance from the cementoenamel junction to the point at which the root separate from the root trunk was 3.82mm for the buccal furcation and 4.75mm for lingual furcation. The buccal root separation was coronal than the lingual root separation.(p<0.01) 3. The total root surface area was $317.78mm^2$. 4. The mean surface area of the root trunk was $150.06mm^2$ and averaged 42.54% of the total root surface area. 5. The mean root surface area was $88.79\;mm^2$ for the mesial root, $78.93mm^2$ for distal root, The mesial root surface area was wider than the distal root surface area.(p<0.05) 6. In comparision, the mean root trunk surface area of the mandibular 2nd molar was wider than that of mandibular 1st molar(p<0.01), but each root of 2nd molar was smaller than that of 1st molar(p<0.01).

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.131-141
• /
• 1989

This study was designed to investigate the fitness of stock tray in Korean adults. 107 dental students (male: 87, female: 20) who have normal occlusion and symmetric facial fom were selected. The upper and lower stock tray (Osungtray, Osung Co., Korea) fit with dental arch were selected for taking irreversible hydrocolloid impression. The author measured the thickness of impression material about two items, that is, width and length on the flange of stock tray. Several measuring points on the dental arches and palatal area were checked with Goldman Fox prove (Hu-Friedy, U.S.A.). The obtained results were as follows: 1. The width of impression material on buccal flange of upper and lower trays were narrower than any other measuring point, but the thickness of impression material on the palatal area of upper stock tray was the widest of all measuring points. 2. The length on buccal flange of lower stock tray was shorter, but the length on tray flange of lower stock tray at lingual frenum area was longer. 3. On upper dental arch, the upper extra-large tray was used in 53% of subjects, but upper small tray was not used. 4. On lower dental arch, the large tray was used in 55% of subjects. 5. There was not adequate tray on upper dental arch in 4 subjects.

• Restorative Dentistry and Endodontics
• /
• v.38 no.2
• /
• pp.59-64
• /
• 2013

Apical surgery cuts off the apical root and the crown-to-root ratio becomes unfavorable. Crown-to-root ratio has been applied to periodontally compromised teeth. Apical root resection is a different matter from periodontal bone loss. The purpose of this paper is to review the validity of crown-to-root ratio in the apically resected teeth. Most roots have conical shape and the root surface area of coronal part is wider than apical part of the same length. Therefore loss of alveolar bone support from apical resection is much less than its linear length.The maximum stress from mastication concentrates on the cervical area and the minimum stress was found on the apical 1/3 area. Therefore apical root resection is not so harmful as periodontal bone loss. Osteotomy for apical resection reduces longitudinal width of the buccal bone and increases the risk of endo-perio communication which leads to failure. Endodontic microsurgery is able to realize 0 degree or shallow bevel and precise length of root resection, and minimize the longitudinal width of osteotomy. The crown-to-root ratio is not valid in evaluating the prosthodontic prognosis of the apically resected teeth. Accurate execution of endodontic microsurgery to preserve the buccal bone is essential to avoid endo-perio communication.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.4
• /
• pp.665-670
• /
• 2004

The mandibular buccal frenum becomes a problem when its attachment is too close to the marginal gingival. Heavy buccal frenum mucogingivally results in insufficient attached gingiva, inadequate vestibular depth and also difficulty in eruption of mandibular premolar. The aim of this study is to demonstrate the effectiveness of apically positioned partial-thickness flap as adequate method in order to remove heavy buccal frenum and expose impacted teeth. The author presents the case of a 12-year-old boy. He had problems that was prolonged eruption of #34, #35 due to high pull buccal frenum. After space regaining for normal eruption of #34, #35, we performed apically positioned partial-thickness flap on #34, 35 area. As a results, we confirmed that eruption of #34, #35 has been processed normally And vestibular depth, position of buccal frenum and width of attached gingival was within a normal range. Decrease in muscle pull, adequate width of attached gingiva and increased vestibular depth can be expected from this treatment.

• Korean Journal of Head & Neck Oncology
• /
• v.36 no.2
• /
• pp.69-72
• /
• 2020

We report a surgically challenging case of a large lipoma located from the temple, across the zygomatic region to the buccal area, resembling two different masses. An 82-year-old man presented with two persistently growing soft masses at his left temple and cheek. A computed tomographic scan revealed a single large radiolucent mass extending from the submuscular layer of the left temple crossing beneath the zygomatic arch to the buccal region, rather than two individual masses. Excision was performed through upper gingivobuccal and temporal incisions. The mass was dissected through both incisions, cut in half, and extracted from both sides. No complications were observed. The biopsy result was consistent with a lipoma. Four months later, the scars were inconspicuous, and the patient was satisfied. Considering the size, shape, and location, this is a rare and intriguing case. The bi-directional approach allowed for successful total excision without any complications, leaving inconspicuous scars.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.1-14
• /
• 1994

Dental calculus which is calcifing and/or calcified dental plaque is divided into supragingival calculus and subgingival calculus according to the position of deposit to gingival margin. Subgingival calculus has more important clinical significance in diagnosis and treatment of periodontal disease than supragingival calculus. In order to investigate the deposition pattern of subgingival calculus on each root surface of different tooth type, extracted 192 teeth due to excessive destruction of periodontal tissue were divided according to tooth type and the deposition pattern of subgingival calculus was classified into linear type, veneer type, scattered type, and aggregated type according to the configuration and the extent of deposit. The difference of percentage between each deposition pattern was statistically analyzed by Chi-Square test. Following results were obtained : l. In maxillary incisors, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(45.5%, 36.4%) and palatal(36.4%, 36.4%) root surface, aggreated type(72.7%) was on mesial surface, and aggregated type(54.5%) and scattered type(36.4%) was on distal suface. 2. In mandibular incisors, scattered type, linear type and aggregated type were predominant deposition pattern of subgingival calculus on labial(33.3%, 30.6%, 27.8%) and lingual(36.1%, 30.6%, 25.0%) root surface, aggregated type(33.3%), scattered type(27.8% ), and veneer type(27.8%) were on mesial surface, and aggregated type(38.9%) and scattered type(33.3%) on distal surface. 3. In maxillary peremolars, the predominant deposition patterns of subgingival calculus were linear type(28.6%) on buccal root suface, scattered type(35.7%) and linear type(28.6%) on palatal surface, scattered type(39.3%) on mesial surface, aggregated type(46.4%) on distal surface, and aggregated type(53.6%) on furcation area. 4. In mandibular premolars, scattered type was predominant deposition pattern of subgingival calculus on buccal(39.3%) and lingual(50.0%) root surface, scattered type(32.1%) and aggregated type(32.1% ) were on mesial surface, and aggregated type(42.9%) was on distal surface. 5. In maxillary molars, aggregated type(40.0%) and scattered type(32.5%) were predominat deposition pattern of subgingival calculus on buccal root surface, aggregated type was on distal(40.0%) and furcation area(50.0%), but there was no predominat pattern on palatal and mesial root surfaces. 6. In mandibular molars, aggregated type(39.5%) and scattered type(28.9%) were predominant deposition patterns of subgingival calculus on buccal root surface, aggregated type(36.8%) was on lingual surface, linear type(39.5%) and aggregated type(34.2%) were on furcation area, but there was no predominant pattern on mesial and distal root surfaces.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.35 no.4
• /
• pp.260-264
• /
• 2013

Calcium hydroxide root canal filing paste (vitapex) is widely used as canal filling paste for infected canal. However, chemical burn is possible because of the high alkali base of calcium hydroxide. A 57-year old woman was admitted to our clinic for consistent dull pain and paresthesia in the left upper lip, zygoma and buccal cheek area, which developed during an endodontic treatment of the left lateral incisor. Radiographic finding showed radiopaque material, which exits from the left incisor root apex, and was within the left canine and first premolar buccal soft tissue. The overfilled Vitapex extended to the soft tissue was surgically curetted. The result of the surgical curettage was favorable. Though slight hypoesthesia on the upper lip was still remained, paresthesia on zygomatic and buccal cheek area was completely recovered. As far as we know, this is the first case report of infraorbital nerve damage from overfilled Vitapex material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.30 no.2
• /
• pp.286-318
• /
• 1992

The objective of preventive dentistry is the maintenance of a healthy dentition for the life of a patient. Unfortunately, if an individual has not received the benefit of a comprehensive program of preventive dentistry and has finally reached the edentulous state, as a consequence, he receives a set of complete denture. Dentures are mechanical devices and subject to the principles of mechanics. In some cases, the general health and nutritional status of the patient are felt to be the causative factors. But, the most important thing in residual ridge resorption is felt to be caused by the unequal distribution of functional forces. This study was to analyze mandibular stresses of complete denture occlusion by three dimensional finite element method. The results were as follows ; 1. As deformation and stress distribution of the complete denture of the mandible were concentrated on the upper lingual side of the mandible, alveolar ridge resorption of the mandible occurred from lingual side to labio-buccal side. 2. Analyzing by three dimensional F. E. M., the mandible is a very effective form for tolerating stress and deformation biomechanically. 3. According to the concentration of stress distibution in the upper buccal side of the lower posteriors, buccal shelf area must be a primary stress bearing area in the lower complete denture. 4. Lower complete denture moved horizontally to the balancing side under lateral occlusal force. 5. Bilateral balanced occlusion should be constructed in the complete denture for denture stability, especially in the protrusive movement. 6. Physical property of the denture base material was as important for stress distribution in the denture base as or even more than that in the mandible. 7. Impression technique is very important because of most of stress was concentrated between them due to close contact of the mandible and the denture base.

• The korean journal of orthodontics
• /
• v.48 no.2
• /
• pp.81-89
• /
• 2018

Objective: The aim of this study was to evaluate the stress distribution and displacement of various craniofacial structures after nonsurgical rapid palatal expansion (RPE) with conventional (C-RPE), bone-borne (B-RPE), and miniscrew-assisted (MARPE) expanders for young adults using three-dimensional finite element analysis (3D FEA). Methods: Conventional, bone-borne, and miniscrew-assisted palatal expanders were designed to simulate expansion in a 3D FE model created from a 20-year-old human dry skull. Stress distribution and the displacement pattern for each circumaxillary suture and anchor tooth were calculated. Results: The results showed that C-RPE induced the greatest stress along the frontal process of the maxilla and around the anchor teeth, followed by the suture area, whereas B-RPE generated the greatest stress around the miniscrew, although the area was limited within the suture. Compared with the other appliances, MARPE caused relatively even stress distribution, decreased the stress on the buccal plate of the anchor teeth, and reduced tipping of the anchor teeth. Conclusions: The findings of this study suggest that the incorporation of miniscrews in RPE devices may contribute to force delivery to the sutures and a decrease in excessive stress on the buccal plate. Thus, MARPE may serve as an effective modality for the nonsurgical treatment of transverse maxillary deficiency in young adults.