• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.31-42
• /
• 2007

The purpose of this study was to compare the stress distribution according to the splinting condition and non-splinting conditions on the finite element models of the two units implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on the mandibular 1st and 2nd molars. A cemented abutment and gold screw were used for superstructures. A FEA models assumed a state of optimal osseointegration, as the bone quality, inner cancellous bone and outer 2 mm compact bone was designed. This concluded that the cortical and trabecular bone were assumed to be perfectly bonded to the implant. Splinting condition had 2 mm contact surface and non-splinting condition had $8{\mu}m$ gap between two implant prosthesis. Two group (Splinting and non-splinting) were loaded with 200 N magnitude in vertical axis direction and were divided with subdivision group. Subdivision group was composed of three loading point; Center of central fossa, the 2 mm and 4 mm buccal offset point from the central fossa. Von Mises stress value were recorded and compared in the fixture-bone interface and bucco-lingual sections. The results were as follows; 1. In the vertical loading condition of central fossa, splinting condition had shown a different von Mises stress pattern compared to the non-splinting condition, while the maximum von Mises stress was similar. 2. Stresses around abutment screw were more concentrated in the splinting condition than the non-splinting condition. As the distance from central fossa increased, the stress concentration increased around abutment screw. 3. The magnitude of the stress in the cortical bone, fixture, abutment and gold screw were greater with the 4 mm buccal offset loading of the vertical axis than with the central loading.

• Korean Journal of Head & Neck Oncology
• /
• v.11 no.1
• /
• pp.47-55
• /
• 1995

A large lateral facial defects especially a through and through defect of the cheek remains as challenging field of reconstruction for the head and neck surgeons. Closure of these wounds is technically troublesome due to the magnitude and location of the soft tissue and skin defect, functional and aesthetic consideration. optimal cancer surveillance, and desire for good nourishment. Most traditional methods dealing with these defects, including split-thickness skin graft, local and regional flaps as well as musculocutaneous flaps have their limitations. We applied four different methods for these reconstruction in four cases. We utilized temporal muscle flap, forearm free flap and secondary healing for repair of mucosal defects, and medial base cervicopectoral flap, pectoralis major myocutaneous flap and cervicofacial flap for the reconstruction of external skin defects. In one case, both sides were reconstructed with single forearm free flap. In our experiences, secondary healing could be one of the useful method for mucosal repair in the defect between upper and lower gingivobuccal sulcus. However, forearm free flap was thought to be more ideal for the cases with mandibulectomy. For the external repair, the regional skin flap was considered to be superior to pectoralis major myocutaneous flap or forearm free flap especially on color matching.

• Restorative Dentistry and Endodontics
• /
• v.21 no.1
• /
• pp.70-86
• /
• 1996

The purpose of this study was to analyze the stress distribution in mandibular second premolars restored with different post and core techniques. Sixteen two-dimensional finite element model of mandibular second premolars restored with post and core and complete crown were developed according to the diameter, length, and material of post and core. Vertical force, 10N in magnitude, was applied first to the central fossa and then $45^{\circ}$ oblique force of same magnitude was applied to the buccal contact surface of buccal cusp. The obtained results were as follows : 1. Stress distribution within the dentin 1) Regardless of the material of the post and core and the diameter and length of the post, the pattern of stress distribution within the dentin was similar. 2) Maximum dentinal stress was observed on the lingual root surface of alveolar crest level with oblique loading and on lingual side of root dentin at the crown margin on vertical loading. 3) Cast post and cores produced the lowest dentinal stress concentrations and the highest stress concentration was observed in composite resin post and cores. 2. Stress distribution within the post and core 1) Within the amalgam and composite resin post and core, the patterns and maximum values of stress were similar. Maximum stress located at the central fossa of core portion on vertical loading and at the lingual junction of post and core with oblique loading. 2) Among the all post and cores, the cast post and core registered the highest stress concentration and maximum stress value within the post. Maximum stress located at the post apex on vertical loading and at lingual half of the post surface with oblique loading. 3) In case of Para-post and amalgam core, maximum stress located at the central fossa of core portion and lingual tip of the post head on vertical loading. With oblique loading, maximum stress located at the lingual half of the post surface.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.60-66
• /
• 2011

Purpose: The aim of this study is to evaluate the buccal and lingual bone thickness in the anterior teeth and the relationship between bone thickness and the tissue biotype. Methods: Three male and two female human cadaver heads (mean age, 55.4 years) were used in this study. First, the biotype of periodontium was evaluated and categorized into a thick or a thin group. Next, full thickness reflections of the mandible and the maxilla to expose the underlying bone for accurate measurements in the anterior regions were performed. After the removal of the half of the alveolar bone, the probe with a stopper was used to measure the thickness of bone plate at the alveolar crest (AC), 3 mm apical to the alveolar crest (AC-3), 6 mm apical to the alveolar crest (AC-6), and 9 mm apical to the alveolar crest (AC-9). The thickness of the buccal plates at the alveolar crest were $0.97{\pm}0.18\;mm$,$0.78{\pm}0.21\;mm$, and $0.95{\pm}0.35\;mm$ in the maxillary central incisors, lateral incisors, and canines, respectively. The thickness of the labial plates at the alveolar crest were $0.86{\pm}0.59\;mm$, $0.88{\pm}0.70\;mm$, and $1.17{\pm}0.70\;mm$ in the mandibular central incisors, lateral incisors and canines, respectively. Conclusions: The thickness of the labial plate in the maxillary anteriors is very thin that great caution is needed for placing an implant. The present study showed the bone thickness of maxillary and mandibular anteriors at different positions. Therefore, these data can be useful for the understanding of the bone thickness of the anteriors and a successful implant placement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.5
• /
• pp.400-405
• /
• 2004

Angiogenesis inhibition is major concern to cancer chemotherapy and many studies about compound inhibiting angiogenesis is in progression. The long-known preventive effect of plant-based diet on tumorigenesis and other chronic diseases is well documented. Especially soy extract, genistein, is known to be potent angiogenesis inhibitor and prevent development and progression of tumor. In the present study, the effect of angiogenesis on tumorigenesis and chemopreventive effect of genistein by angiogenesis inhibition in hamster buccal pouch oral carcinigenesis model induced by 7.12-dimethylbenza(a)nthracene (DMBA) was studied. Forty eight Syrian Golden young adult hamsters (150-200 gm) were divided into two groups. In control group, 0.5% DMBA in heavy mineral oil was applied to hamster buccal pouch three times a week and in experimental group, 0.1 mg of genistein is administered orally everyday in addition to DMBA application. The animals were euthanized from 2 weeks to 16 weeks with interval of 2 week. H&E staining and immunohistochemistry was performed to evaluate microvessel density by using factor VIII-related antigen and avidin-biotin technique. Microvessels per area was quantified and compared between control and experimental group statistically. The results were as follows. 1. Microvessel density was increased time dependently in both groups and especially the increase was significant from 12 weeks to 16 weeks. 2. When comparing both group, the experimental group showed significantly low microvessel density than control group in 12 weeks (p=0.043), 14 weeks (p=0.050), 16 weeks (p=0.037). Based on these results, it was concluded that genistein influenced oral carcinogenesis by angiogenesis inhibition.

• Journal of Oral Medicine and Pain
• /
• v.21 no.1
• /
• pp.141-152
• /
• 1996

Oral Lichen Planus(OLP) is a idiopathic chronic inflammatory disease with more difficult to clear and higher recurrent rate than cutaneous lesions. But, there has been no estabilished theories about the proper treatment for OLP. The purpose of this study is to examine the clinical feature, relationship with systemic disease and dental treatment of OLP patients of Korea and to gain helpful information about clinical characteristics and treatment of OLP. The subjects chosen for the study were 54 patients who had visited Department of Oral Diagnosis & Oral Medicine at Yonsei University Dental Hospital Dental Hospital and diagnosed as OLP. Previous clinical records has been reviewed and questionnaires, oral examination, laboratory examination were done and recorded. The following results were obtained : 1. Of the 54 patients, 21 were men and 33 were women with an average age of 47.8 years. 2. The most common intraoral site was bilateral buccal mucosa, followed by unilateral buccal mucosa, gingiva, vesibule, lip mucosa, glossal mucosa, palatal mucosa and mouth floor. 3. The mixed, erosive and reticular form of OLP was most frequent(83.3%) clinical form. 4. OLP patients with liver disease were 5, and drug medication patients were 7. But, we could not find its evidence of association with OLP. 5. Associated events on onset of symptom were stress, denture wearing, dental treatemtn, and common cold. 6. Associated symptoms were dry mouth, tingling, sore throat, and altered taste perception. 30.8% of patients had no specific associated symptoms. 7. Aggravating factors of symptom were peppery food, hot food, fatigue, toothpaste, salty food, sour food, tension, and conversation. Reducing factors were cold food, sleeping. 69.2% of patients had no specific reducing factors. 8. There were no significant differences between normal papulation and OLP patients in CBC, SGOT< SGPT, Serum iron, Total iron binding capacity. 66.7% of subjects were positive response to fungus study for Candida Albicans. The incidence of stress and dental treatment on onset of symptom appeared high in OLP patients. Especially, high incidence of positive response to fungus study for Candida albicans, prescription of anti-fungal agents and dental treatment considerations may be helpful to treatment of OLP.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.93-106
• /
• 1987

The purpose of this study was to investigate the fittness of Golden relation items was advocated by Ricketts whether or not it is applicable to the young adult Korean dentitions and also to evaluate the several new Golden relation items conducted by the author. The material was consisted of 81 dental casts (34 male, 47 female) with ideal occlusion, which never undergone orthodontic, prosthodontic procedures. Measurements were made on the arch dimensions using sliding caliper (Mitutoyo. Co) and data were computerized and analyzed. The findings of this study were as follows, 1. The Golden proportion advocated by Ricketts dose not seem to directly applicable to the Korean normal dentition, however, the modification from the Ricketts' original shows the Golden proportion as follow: A first series of progressive Golden relations was found on the Golden ratio among the lower central incisors width, the inter mesioincisal width of the upper lateral incisors, and the upper first premolars width. A second series was found on the Golden ratio among the lower lateral incisors width, lower inter canine tips width and theupper first molar distal cusp tips width. A third series was found on the Golden ratio between the inter distal aspect width of e lower canine and the mesial cusp tips width of the lower second molars or inter cusp tips width of upper second premolars. 2. In addition to Ricketts' original, 4 new Golden proportions were found in young adult Korean dentition, these are as follows; The tips of lower canine width had Golden relation with the width of the upper first premolar buccal cusp tips or the width of the lower first molar central fossae. The distal aspect of the lower first premolars had Golden relation with the buccal surface widths of the lower or upper second molars. The width of upper lateral incisors had Golden relation with the upper second molar height. The width of the lower canine tips had Golden relation with the lower second molar height.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.77-86
• /
• 2017

Objective: The aim of this study was to evaluate the skeletal and dentoalveolar changes after miniscrew-assisted rapid palatal expansion (MARPE) in young adults by cone-beam computed tomography (CBCT). Methods: This retrospective study included 14 patients (mean age, 20.1 years; range, 16-26 years) with maxillary transverse deficiency treated with MARPE. Skeletal and dentoalveolar changes were evaluated using CBCT images acquired before and after expansion. Statistical analyses were performed using paired t-test or Wilcoxon signed-rank test according to normality of the data. Results: The midpalatal suture was separated, and the maxilla exhibited statistically significant lateral movement (p < 0.05) after MARPE. Some of the landmarks had shifted forwards or upwards by a clinically irrelevant distance of less than 1 mm. The amount of expansion decreased in the superior direction, with values of 5.5, 3.2, 2.0, and 0.8 mm at the crown, cementoenamel junction, maxillary basal bone, and zygomatic arch levels, respectively (p < 0.05). The buccal bone thickness and height of the alveolar crest had decreased by 0.6-1.1 mm and 1.7-2.2 mm, respectively, with the premolars and molars exhibiting buccal tipping of $1.1^{\circ}-2.9^{\circ}$. Conclusions: Our results indicate that MARPE is an effective method for the correction of maxillary transverse deficiency without surgery in young adults.

• Journal of Oral Medicine and Pain
• /
• v.25 no.4
• /
• pp.355-364
• /
• 2000

This study was to find dental materials causing hypersensitivity reactions by carrying out patch tests in the patients with oral mucosal lesions to investigate the possibility of hypersensitivity reactions in etiology of oral mucosal lesions. 31 patients (female 26, male 5, age range 24-72 years) with oral mucosal lesions were classified as patient group, and 41 volunteers (female 24, male 17, age range 23-40 years) without oral mucosal lesion, systemic disease and history of allergy as control group. The obtained results were as follows: 1. There were various dental restorations in most of patient group and control group, 29(94%) in 31 patient group, 35(85%) in 41 control group. 2. Among sites of oral mucosal lesions, buccal mucosa was the most common site with 60%, followed by gingiva with 24%, tongue with 16%. Lesions in contact with restorations were highly 90% in tongue and 89% in buccal mucosa, but comparatively lower 53% in gingiva. 3. The ratio of positive reactions to the patch test in patient group was significantly higher than the control group (p<0.05). 4. Dental materials causing positive reactions to the patch test were mainly mercury(19%), potassium dichromate(16%), cobalt chloride(16%) in patient group, cobalt chloride(17%) in control group. 5. In 20 patients with lichen planus, 8 patients(40%) showed positive reactions to the patch test.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.1
• /
• pp.1-6
• /
• 2002

When bilateral sagittal split ramus osteotomy or mandibular angle reduction are carried out, we have to consider the position of inferior alveolar nerve. For bone splitting or resection using a saw or an osteotome, the bucco-lingual position of the inferior alveolar nerve plays an important role in the preventing perioperative complications such as paresthesia or anesthesia. Because it is rare to find literatures concerning the mean anatomic position of the inferior alveolar nerve in Koreans, we investigated 30 patients who underwent to take CT and orthopantomogram for implant surgery, and evaluated the bucco-lingual position and vertical relationship of the inferior alveolar nerve at the mandible. The results showed that the distance between inferior alveolar nerve and buccal plate was the farthest at mandibular second molar ($7.1{\sim}7.4mm$) and the nearest at mandibular angle area ($4.4{\sim}4.8mm$). But it was no statistical relationship between the bucco-lingual postion of inferior alveolar nerve on the CT and its vertical position on the OPT. In conclusion, the results suggest that a careful surgical procedure is needed at the mandibular angle area to avoid a nerve damage and there are sufficient bone materials at the mandibular second molar are for bilateral sagittal split ramus osteotomy or mandibular angle reduction or plate fixation. And OPT is not usefull for the evaluation of a relative bucco-lingual position of inferior alveolar nerve in relation to its vertical postion on the OPT.