• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.5.1-5.9
• /
• 2017

Many congenital and acquired defects occur in the maxillofacial area. The buccal fat pad flap (BFP) is a simple and reliable flap for the treatment of many of these defects because of its rich blood supply and location, which is close to the location of various intraoral defects. In this article, we have reviewed BFP and the associated anatomical background, surgical techniques, and clinical applications. The surgical procedure is simple and has shown a high success rate in various clinical applications (approximately 90%), including the closure of oroantral fistula, correction of congenital defect, treatment of jaw bone necrosis, and reconstruction of tumor defects. The control of etiologic factors, size of defect, anatomical location of defect, and general condition of patient could influence the prognosis after grafting. In conclusion, BFP is a reliable flap that can be applied to various clinical situations.

• The Journal of the Korean dental association
• /
• v.16 no.2 s.105
• /
• pp.147-150
• /
• 1978

The author conducted an experiment on the relativity between the mandibular buccal and lingual cusp inclines by means of measuring full arch plaster cast teeth of the fifty student subjects of the College of Dentistry, Seoul National University. The results were as follows: 1. The statistical relativity between the mandibular buccal and lingual cusp inclines in individual tooth was hardly recognized. 2. In the cusp incline data of the whole posterior teeth, the rough basis for the harmonizing with the other occlusion factors was recognizable. 3. The cusp inclination itself was incomplete in mechanical balance, therefore, it might be said that there were a lot of possibilities that the cusp incline may act as a potential etiological factor to give rise to occlusal diseases.

• Anatomy and Cell Biology
• /
• v.57 no.1
• /
• pp.152-154
• /
• 2024

There are major and minor salivary glands that aid in the digestive process. Major glands are discrete and exist in predictable locations; minor salivary glands are more widespread and usually found dispersed in the mucosa of the mouth. Glands have their own contractile abilities, which allow them to secrete products without the assistance of vasculature or skeletal, or smooth muscle. This study will describe a cadaveric histological specimen in which an ectopic buccal gland was embedded within bucinator muscle fibers. Potential causes and explanations for this finding will be discussed, as well.

• Journal of Periodontal and Implant Science
• /
• v.48 no.3
• /
• pp.182-192
• /
• 2018

Purpose: The purpose of the present study was to validate an experimental model for assessing tissue integration of titanium and zirconia implants with and without buccal dehiscence defects. Methods: In 3 dogs, 5 implants were randomly placed on both sides of the mandibles: 1) Z1: a zirconia implant (modified surface) within the bony housing, 2) Z2: a zirconia implant (standard surface) within the bony housing, 3) T: a titanium implant within the bony housing, 4) Z1_D: a Z1 implant placed with a buccal bone dehiscence defect (3 mm), and 5) T_D: a titanium implant placed with a buccal bone dehiscence defect (3 mm). The healing times were 2 weeks (one side of the mandible) and 6 weeks (the opposite side). Results: The dimensions of the peri-implant soft tissue varied depending on the implant and the healing time. The level of the mucosal margin was located more apically at 6 weeks than at 2 weeks in all groups, except group T. The presence of a buccal dehiscence defect did not result in a decrease in the overall soft tissue dimensions between 2 and 6 weeks ($4.80{\pm}1.31$ and 4.3 mm in group Z1_D, and $4.47{\pm}1.06$ and $4.5{\pm}1.37mm$ in group T_D, respectively). The bone-to-implant contact (BIC) values were highest in group Z1 at both time points ($34.15%{\pm}21.23%$ at 2 weeks, $84.08%{\pm}1.33%$ at 6 weeks). The buccal dehiscence defects in groups Z1_D and T_D showed no further bone loss at 6 weeks compared to 2 weeks. Conclusions: The modified surface of Z1 demonstrated higher BIC values than the surface of Z2. There were minimal differences in the mucosal margin between 2 and 6 weeks in the presence of a dehiscence defect. The present model can serve as a useful tool for studying peri-implant dehiscence defects at the hard and soft tissue levels.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.207-216
• /
• 2000

Purpose : This study was carried out to investigate the effect of irradiation on the expression of proliferating cell nuclear antigen (PCNA) and apoptosis induction during the carcinogenesis in hamster buccal pouch. Materials and methods: Three months old Syrian golden hamsters were divided into control and 2 experimental groups. Hamsters in control group were left untreated on buccal pouchs. Twenty four hamsters were treated with 0.5% DMBA tri-weekly on the right buccal pouch. Forty eight hamsters were treated with 0.5% DMBA tri-weekly and irradiated with the dose of 5 Gy and 10 Gy at 6, 9, 12, 15 weeks after DMBA application. Resected buccal pouches were sectioned and examined for potential expression pattern of PCNA and apoptosis. Results : The PCNA index was increased with the stages of buccal pouch epithelium carcinogenesis except the hyperplasia stage in control group (p<0.05). The irradiation did not effect on the PCNA index in the dysplasia and the carcinoma in situ stage, but in the hyperplasia stage, the PCNA index was increased with 10 Gy radiation and decreased in the carcinoma stage (p<0.05). The apoptotic index was significantly decreased from the carcinoma in situ stage and the lowest in the carcinoma stage. The apoptotic index was significantly decreased in the hyperplasia and dysplasia stage with the 5 Gy irradiation and significantly increased only in the carcinoma stage with the 10 Gy irradiation (p<0.05). Conclusion: The PCNA and apoptotic index were varied according to the irradiation period and dosage in each carcinogenesis stage.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.428-446
• /
• 1997

Restorative procedures can lead to weakening tooth due to reduction and alteration of tooth structure. It is essential to prevent fractures to conserve tooth. The resistance to fracture of the restored tooth may be influenced by many factors, among these are the cavity dimension and the physical properties of the restorative material. The placement of direct composite resin restorations has generally been found to have a strengthening effect on the prepared teeth. It is the purpose of this investigation to study the relationship between the cavity isthmus and the fracture resistance of a tooth in composite resin restorations. In this study, MO cavity was prepared on maxillary first premolar. Three dimensional finite element models were made by serial photographic method and isthmus(1/4, 1/3, 1/2 of intercuspal distance) were varied. Two types of model(B and R model) were developed. B model was assumed perfect bonding between the restoration and cavity wall and R model was left unfilled. A load of 500N was applied vertically at the first node from the lingual slope of the buccal cusp tip. This study analysed the displacement, 1 and 2 direction normal stress and strain with FEM software ABAQUS Version 5.2 and hardware IRIS 4D/310 VGX Work-station. The results were as follows : 1. Displacement of buccal cusp in R model occurred and increased as widening of the cavity, and displacement in B model was little and not influenced by cavity width. 2. There was a significant decrease of stress resulting in increase of fracture resistance in B model when compared with R model. 3. With the increase of the isthmus width, B model showed no change in the stress and strain. In R model, the stress and strain increased both in the area of buccal-pulpal line angle and the buccal side of marginal ridge, therefore the possibility of crack increased. 4. The stress and strain were distributed evenly on the tooth in B model, but in R model, were concentrated on the buccal side of the distal marginal ridge and buccal-pulpal line angle, therefore the possibility of fracture increased.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.57-64
• /
• 2018

Pre-eruptive intracoronal resorption (PEIR) is a developmental defect in the crown of a pre-eruptive tooth. The purpose of this study was to investigate the relationship between the size of the pre-eruptive buccal pit radiolucency, which is suspected as PEIR on a panoramic radiography, and the need for restoration after the eruption of a mandibular first molar. The experimental group included 35 mandibular first molars, in which lesions requiring definite restoration were observed during eruption. The control group consisted of 64 sound mandibular first molars after eruption. The sex, age, tooth position, tooth formation stage, size of the pre-eruptive buccal pit radiolucency, and restoration methods in the experimental group and control group were examined. Compared with the control group, the experimental group showed a statistically significant difference in the size of the buccal pit before eruption. The buccal pit size for predicting the need for restoration was further examined by receiver operating characteristic curve analyses, and the area under the curve was $0.813{\pm}0.047$. If radiolucency is observed at the buccal pit of the mandibular first molar before eruption, periodic observations and post-eruption examinations are required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.400-408
• /
• 2019

The purpose of this study is to identify the most common canal type in primary molars and the correlation between their roots and canals. A comprehensive understanding of root canal morphology will lead to more successful root canal treatment. Computed Tomography (CT) images from 114 children (81 boys, 33 girls) aged 3 - 7 years were obtained. The locations and numbers of roots and canals were evaluated, and the relationship between root and canal parameters was determined. The most commonly observed canal morphology in primary maxillary molars were mesio-buccal, disto-buccal and palatal canal. Primary mandibular molars most frequently contain mesio-buccal, mesio-lingual, disto-buccal and distolingual canal. All the roots of the primary maxillary molars except for the mesio-buccal root, each had 1 canal while there were 2 canals observed in each root of primary mandibular molars. Without exception, all mesial roots in primary mandibular 2nd molars had 2 canals. In case when either the palatal root in a primary maxillary molar or the distal root in a primary mandibular molar was separated into 2 roots, each root seemed to have its own canal. Even though the disto-buccal and palatal roots were fused into 1 root in primary maxillary molars, this fused root had tendency to have 2 separate canals. Primary mandibular molars showed similar canal morphologies between left and right molars in the same patient, while the primary maxillary molars did not.

• The korean journal of orthodontics
• /
• v.43 no.2
• /
• pp.83-95
• /
• 2013

Objective: To evaluate the changes in cortical bone thickness, alveolar bone height, and the incidence of dehiscence and fenestration in the surrounding alveolar bone of posterior teeth after rapid maxillary expansion (RME) treatment using cone-beam computed tomography (CBCT). Methods: The CBCT records of 20 subjects (9 boys, mean age: $13.97{\pm}1.17$ years; 11 girls, mean age: $13.53{\pm}2.12$ year) that underwent RME were selected from the archives. CBCT scans had been taken before (T1) and after (T2) the RME. Moreover, 10 of the subjects had 6-month retention (T3) records. We used the CBCT data to evaluate the buccal and palatal aspects of the canines, first and second premolars, and the first molars at 3 vertical levels. The cortical bone thickness and alveolar bone height at T1 and T2 were evaluated with the paired-samples t-test or the Wilcoxon signed-rank test. Repeated measure ANOVA or the Friedman test was used to evaluate the statistical significance at T1, T2, and T3. Statistical significance was set at p < 0.05. Results: The buccal cortical bone thickness decreased gradually from baseline to the end of the retention period. After expansion, the buccal alveolar bone height was reduced significantly; however, this change was not statistically significant after the 6-month retention period. During the course of the treatment, the incidence of dehiscence and fenestration increased and decreased, respectively. Conclusions: RME may have detrimental effects on the supporting alveolar bone, since the thickness and height of the buccal alveolar bone decreased during the retention period.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.2
• /
• pp.93-98
• /
• 1993

Pleomorphic adenoma is the most common of all salivary gland tumors, constituting over 50% of all cases of tumors of both major and minor salivary gland origin and approximately 90% of all benign salivary gland tumors. Of the major salivary glands, the parotid gland is the most common site of the pleomorphic adenoma. It may occur, however, in any of the major gland or in the widely distributed intraoral accessory salivary glands. The palatal glands are frequently the site of origin of tumors, and other parts of origins are as follows: upper and lower lip, buccal mucosa, tongue and occasionally other sites. The majority of the lesions are found in patients in the fourth to sixth decades, but they are also relatively common in young adults and have been known to occur in children. It is somewhat more frequent in women than men. The term "mixed tumor" has masquaeraded under a great variety of names throughout the years (e.g., enclavoma, branchioma, endothelioma, enchondroma), but the term "pleomorphic adenoma" suggested by Willis characterizes closely the unusual histologic pattern of the lesion. The accepted treatment for this tumor is surgical excision. The intraoral lesions can be treated somewhat more conservatively by extracapsular excision. In general, Lesions of the hard palate should be excised with the overlying mucosa, while those in lining mucosa, such as the lips, soft palate and buccal mucosa often can be treated successfully by enucleation or extracapsular excision. In our hospital, we experienced two patients who were identified pleomorphic adenoma which occurred at buccal mucosa, submandibular gland. The lesions were successfully treated by surgical excision.