• Imaging Science in Dentistry
• /
• v.47 no.3
• /
• pp.181-187
• /
• 2017

Purpose: The purpose of this study was to measure the buccal bone thickness and angulation of the maxillary incisors and to analyze the correlation between these parameters and the root position in the alveolar bone using cone-beam computed tomography (CBCT). Materials and Methods: CBCT images of 398 maxillary central and lateral incisors from 199 patients were retrospectively reviewed. The root position in the alveolar bone was classified as buccal, middle, or palatal, and the buccal type was further classified into subtypes I, II, and III. In addition, the buccolingual inclination of the tooth and buccal bone thickness were evaluated. Results: A majority of the maxillary incisors were positioned more buccally within the alveolar bone, and only 2 lateral incisors(0.5%) were positioned more palatally. The angulation of buccal subtype III was the greatest and that of the middle type was the lowest. Most of the maxillary incisors exhibited a thin facial bone wall, and the lateral incisors had a significantly thinner buccal bone than the central incisors. The buccal bone of buccal subtypes II and III was significantly thinner than that of buccal subtype I. Conclusion: A majority of the maxillary incisor roots were positioned close to the buccal cortical plate and had a thin buccal bone wall. Significant relationships were observed between the root position in the alveolar bone, the angulation of the tooth in the alveolar bone, and buccal bone thickness. CBCT analyses of the buccal bone and sagittal root position are recommended for the selection of the appropriate treatment approach.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.2
• /
• pp.71-74
• /
• 2005

The aim of this study was to analyze characteristics of the barrier function of excised porcine buccal mucosa to the test compounds, estradiol, propranolol HCI, melatonin, and mannitol with a wide range of partition coefficient values. The permeability of melatonin was measured through frozen, stored, and fresh porcine buccal mucosa to examine the impact of storage conditions on the permeability of porcine buccal mucosa. The results demonstrated that the ex vivo permeability of the porcine buccal mucosa was greater for more lipophilic solutes, which was consistent with a series of molecules transported by passive transepithelial diffusion. The melatonin permeation profiles through frozen, stored, and fresh mucosa illustrated that damage was incurred by the freezing process of the mucosal tissue, leading to loss of the barrier function and thereby an increased permeation coefficient. It can be observed that the influence of compound lipophilicity on the association of the compounds with buccal mucosa was clear. The relationship between permeation coefficient and Log P values for the four compounds investigated demonstrated a proportional relationship, further confirming the importance of the lipophilicity of a compound to permeate the buccal mucosa. These results showed that the ex vivo porcine buccal mucosa model is a suitable tool to screen oral mucosal permeability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.253-263
• /
• 2022

A buccal pit is a prominent point-like depression that appears at the cervical end of the mandibular molar developmental grooves. A defective buccal pit can be defined as a buccal pit in which the continuity of the dentinoenamel junction is broken and the pit extends to the dentinal level. This study aimed to determine the frequency of buccal pits and defective buccal pits in un-erupted mandibular first and second molars using cone-beam computed tomography (CBCT). The analysis was performed on CBCT images taken from 417 Korean children and adolescents who visited the Department of Pediatric Dentistry, Yonsei University Dental Hospital between 2004 and 2020. Based on cross-sectional views of CBCT images, buccal pits were categorized into 4 classes according to the depth of the pits. The expression rate of the buccal pits was 29.1%. The prevalence of defective buccal pits was 7.9%. The buccal pits tended to develop bilaterally. To date, this is the most comprehensive study on the frequency of buccal pits with the largest sample size. This was the first attempt worldwide to analyze the depth of the buccal pit using CBCT images and to define a defective buccal pit worldwide.

• The Journal of Advanced Prosthodontics
• /
• v.2 no.3
• /
• pp.92-96
• /
• 2010

PURPOSE. The aim of this study was to evaluate the thickness of buccal and palatal alveolar bone and buccal bony curvature below root apex in maxillary anterior teeth of Korean adults using Cone-beam CT images. MATERIALS AND METHODS. The 3D image was reconstructed with dicom file obtained through CBCT from 20 - 39 year old Korean subjects (n = 20). The thickness of buccal and palatal plate, root diameter, the buccal bony curvature angle below root apex and the distance from root apex to the deepest point of buccal bony curvature were measured on maxillary anterior teeth area using OnDemand3D program. RESULTS. Mean thickness of buccal plate 3 mm below CEJ was $0.68{\pm}0.29\;mm$ at central incisor, $0.76{\pm}0.59\;mm$ at lateral incisor, and $1.07{\pm}0.80\;mm$ at canine. Mean thickness of palatal plate 3 mm below CEJ was $1.53{\pm}0.55\;mm$ of central incisor, $1.18{\pm}0.66\;mm$ of lateral incisor, $1.42{\pm}0.77\;mm$ of canine. Bucco-lingual diameter 3 mm below CEJ was $5.13{\pm}0.37\;mm$ of central incisor, $4.58{\pm}0.46\;mm$ of lateral incisor, and $5.93{\pm}0.47\;mm$ of canine. Buccal bony curvature angle below root apex was $134.7{\pm}17.5^{\circ}$ at central incisor, $151.0{\pm}13.9^{\circ}$ at lateral incisor, $153.0{\pm}9.5^{\circ}$ at canine. Distance between root apex and the deepest point of buccal bony curvature of central incisor was $3.67{\pm}1.28\;mm$ at central incisor, $3.90{\pm}1.51\;mm$ at lateral incisor, and $5.13{\pm}1.70\;mm$ at canine. CONCLUSION. Within the limitation of this study in Korean adults, the thickness of maxillary anterior buccal plate was very thin within 1mm and the thickness of palatal plate was thick, relatively. The buccal bony curvature below root apex of maxillary central incisor was higher than that of lateral incisor and canine and it seems that the buccal bony plate below root apex of central incisor is most curved.

• The korean journal of orthodontics
• /
• v.42 no.3
• /
• pp.110-117
• /
• 2012

Objective: In this study, we measured the cortical bone thickness in the mandibular buccal and lingual areas using computed tomography in order to evaluate the suitability of these areas for application of temporary anchorage devices (TADs) and to suggest a clinical guide for TADs. Methods: The buccal and lingual cortical bone thickness was measured in 15 men and 15 women. Bone thickness was measured 4 mm apical to the interdental cementoenamel junction between the mandibular canine and the 2nd molar using the transaxial slices in computed tomography images. Results: The cortical bone in the mandibular buccal and lingual areas was thicker in men than in women. In men, the mandibular lingual cortical bone was thicker than the buccal cortical bone, except between the 1st and 2nd molars on both sides. In women, the mandibular lingual cortical bone was thicker in all regions when compared to the buccal cortical bone. The mandibular buccal cortical bone thickness increased from the canine to the molars. The mandibular lingual cortical bone was thickest between the 1st and 2nd premolars, followed by the areas between the canine and 1st premolar, between the 2nd premolar and 1st molar, and between the 1st molar and 2nd molar. Conclusions: There is sufficient cortical bone for TAD applications in the mandibular buccal and lingual areas. This provides the basis and guidelines for the clinical use of TADs in the mandibular buccal and lingual areas.

• Archives of Pharmacal Research
• /
• v.25 no.4
• /
• pp.546-549
• /
• 2002

The impact of storage conditions on the permeability of porcine buccal mucosa to [$^3H$]water and [$^{14}C$]mannitol was assessed. The fresh pocine buccal tissue (fresh tissue) was obtained by utilizing pig heads within 24 hours of slaughter. The stored and frozen porcine buccal tissues (stored tissue and frozen tissue) were obtained after the storage of the tissue intact in the pig heads at $4^{\circ}C$ or -$20^{\circ}C$, respectively, for 24 h. The results demonstrated that the barrier properties of the porcine buccal mucosa were maintained with regard to [$^3H$]water permeability when stored at $4^{\circ}C$ for 24 h. However, freezing the tissue resulted in tissue damage illustrated by a significant increase in [$^3$H]water permeability. [$^{14}C$]Mannitol does not appear to be a suitable model solute to assess the ex vivo permeability of porcine buccal mucosa due to its extremely low permeability.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.20 no.3
• /
• pp.185-190
• /
• 1998

Various local flaps and distant flaps including tongue flap, palatal island flap, and buccal flap as well as skin grafts have been used for the reconstruction of oral mucosal defect. In the posterior region of oral cavity and the buccal cheek area, buccal fat pad can be used as a pedicled graft. The buccal fat pad is different from other subcutaneous fat tissue and it is easily accessible. There are many advantages in pedicled buccal fat pad graft for the closure of oral mucosal defect. The procedure is easy, there is no visible scar in the donor site, it is capable of reconstruction of various contour, and it has good viability. We had used buccal fat pad as a pedicled graft for the closure of oral mucosal defect after the excision of tumor and the oroantral fistula. From the results of these cases, we concluded that the use of the buccal fat pad flaps was worth of the consideration for the reconstruction of oral mucosal defect in the regions of the buccal cheek, and posterior oral cavity.

• Archives of Craniofacial Surgery
• /
• v.14 no.2
• /
• pp.102-106
• /
• 2013

Background: When using the anterior approach for performing superficial parotidectomy, the first thing to do is to find the buccal branch of the facial nerve and the parotid duct. The buccal branch usually runs transversely with the parotid duct from the anterior border of the parotid gland. We wanted to check the relationship between the two structures during the operation and to get clinically helpful information. Methods: Twelve patients with parotid mass were treated with superficial parotidectomy between May 2012 and August 2012. The outline of superficial and deep lobes of the parotid gland, parotid duct, and the buccal branch of the facial nerve were drawn on the transparent film by tracing the structures intraoperatively. Results: In 7 (58.3%) of 12 cases, the buccal branch of the facial nerve was located more caudally than the parotid duct at the anterior border of the superficial lobe of the parotid gland. In 3 cases (25%), the buccal branch was located more cephalically than the parotid duct. The mean distance between two structures were $2.54{\pm}1.48$ mm. In 11 cases, the parotid duct was located deeper than the buccal branch. Conclusion: The buccal branch of the facial nerve tends to be located more caudally than parotid duct and runs more superficially than parotid duct in all cases. We identified the relationship between the parotid duct and the buccal branch of the facial nerve during the operations on living subjects, not from the cadavers, so it would be a clinically helpful study which supplied more accurate anatomical information.

• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.31-36
• /
• 2010

Purpose: The primary goal of palatoplasty is to enable normal speech with harmonious growth of face. Some children who had palatoplasty display typical findings of transverse maxillary deficiency requiring orthodontic widening of the maxilla. Levi (2009) described a cleft palate repair coupled with pedicled buccal fat pad flaps to cover bone exposed areas of the hard palate. Hence we report clinical experiences of cleft palate repair using pedicled buccal fat pad flap. Methods: Four Veau class II and a Veau class I cleft palate patients underwent palatoplasty with buccal fat pad flap by single surgeon from April 2009 to August 2009. Two patients received 2-flap palatoplasty and three patients 1-flap palatoplasty, respectively. After the cleft palate repair, sharp mosquito scissors was placed in the superior buccal sulcus just lateral to the maxillary tuberosity and inserted directly through the mucosa resulting in buccal fat pad extrusion. The elevated flap was moved to cover mucoperiosteal defect in hard palatal area. Results: Five patients underwent primary palatoplasty using buccal fat pad flap. Flap harvest and inset took on average 9 minutes per flap. Mucosal epithelization took 18 days on average. No patients had complications related to the buccal fat pad flap. Conclusion: Buccal fat pad pedicled flap has significant potential to function as an added vascularized tissue layer in cleft palate repair and we can expect better growth of maxilla with this method although longer duration of follow-up was unavailable.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.1
• /
• pp.29-32
• /
• 1994

IN 1956, Peer presented a very comprehensive account of free fatty tissue transplantation. The use of buccal fat pad had been usually used to reconstruct the perioral defects. The buccal fat pad is a special fatty tissue which is markedly different from subcutaneous fat. And it is a easily accessible fat tissue in oral and maxillofacial region. The buccal fat pad can be used as a free graft or pedicled flap. Recently, buccal fat pad is interested in cosmetic surgery because its' removal for cosmetic purpose has been favorable result. We used the buccal fat as an unlined, pedicled graft for closure of large oroantral fistula. We present a case of report and review of literature.