• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1126-1129
• /
• 2000

The equivalent transformation of a brushless DC motor into an separately exited DC motor has been possible with the vector control technique. Vector control is an effective technique for controlling variable speed drives of brushless DC motors. Conventional vector controllers, however, suffer from electrical machine parameter variations because these controllers depend on the parameters. This paper presents the vector control of brushless DC motor using a neural network. In the proposed method, a neural network is employed as on-line estimator of the nonlinear dynamic equations of brushless DC motor. The neural network based vector controller has the advantage of robustness against machine parameter variations as compared with conventional vector controller The simulation results using Matlab/Simulink verify the useful of the proposed method.

• Journal of Power Electronics
• /
• 제5권1호
• /
• pp.62-66
• /
• 2005

A simple fault correction method for rotor position detection of a brushless DC(BLDC) motor with trapezoidal back EMF(electromotive force) using a Hall effect latch unit is presented. The reason why the Hall effect latch unit does not operate properly during the startup of a BLDC motor is thoroughly explained. To solve this problem, a simple code change method and its hardware implementation issues are proposed and discussed.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.124-138
• /
• 2003

An advanced simulation model for brushless dc (BLDC) motor drives using Matlab is presented. In the developed model, the dynamic characteristics of speed and torque as well as voltages and currents of pwm inverter components can be effectively monitored and analyzed. Therefore, it can be expected that the developed simulation model can be an easy-to-design tool for the development of BLDC motor drives including control algorithms and topological variations with reduced computation time and memory size.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권9호
• /
• pp.490-497
• /
• 1999

This paper presents a novel current control method to reduce the current ripple due to commutation in brushless DC motor fed with unipolar PWM voltage source inverter. The proposed current control method can reduce the current ripple due to commutation in high speed range where the DC link voltage of the inverter is less than four times of the phase back-emf. The effectiveness of the proposed current control method is verified with digital simulations and experiments on the 250W brushless DC motor drive systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.329-332
• /
• 2002

Recently, most machineries have been small size and mobile type. Then the motors used in this field are developed in micro size such as about 2mm in diameter. The structure of this motor is similar to a general brushless DC motor but because of small sige there is no position sensor such as hall sensor. In this paper, we propose synchronous driving and control method for micro brushless DC motor without position sensor. We design and manufacture this controller and perform experiment to show the effectiveness of the proposed method.

• 전력전자학회논문지
• /
• 제14권3호
• /
• pp.197-203
• /
• 2009

본 논문에서는 집중권 BLDC 전동기의 권선 착자 공정에서 발생하는 착자 불량을 진단할 수 있는 새로운 방법을 제안한다. 착자 불량 모델을 이용한 컴퓨터 시뮬레이션과 압축기를 이용한 효율 시험을 통해 권선 착자 불량이 BLDC 전동기의 에너지 효율 저감을 야기할 수 있음을 입증하였다. 제안된 방식은 착자 공정이 완료된 후에 BLDC 전동기를 구동하는 시험 과정에서 인버터를 이용하여 권선 착자 불량을 진단한다. 압축기용 BLDC 전동기에 대한 실험을 통해 권선 착자 불량을 높은 감도로 찾아낼 수 있음을 보인다.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.48-51
• /
• 2024

Recently, high-performance BLDC(Brushless DC) motors are being applied to various fields such as industrial and personal mobility devices and drones. To achieve the best performance of BLDC, sensors such as hall sensors, encoders, and resolvers are used to determine the position of the rotor, and various speed control technologies are being developed. However, due to problems with high-speed control due to external environmental factors and frequency bandwidth of semiconductor sensing devices, research on BLDC motors without semiconductor sensing devices is in progress. Therefore, in this study, a signal brush was added to the end of the rotor of a BLDC motor and the rotor position of the BLDC motor was detected by analyzing the signal output through the signal brush.

• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.183-192
• /
• 1998

In this paper, we measure the back-EMF and the thrust of a linear brushless DC motor along the relative position between coils and magnets in various speed environments in order to obtain the back-EMF and the thrust as a function of a motor position. The measured back-EMF function and thrust function of the position differ from the analytical ones within 5%. The measured back-EMF and thrust function can, then, be employed in controlling the thrust ripple of the linear motor. Furthermore, to minimize the torque ripple of the linear motor, we suggest the design method to shape the back-EMF and thrust function of the linear motor.

• 전력전자학회논문지
• /
• 제9권3호
• /
• pp.195-202
• /
• 2004

본 연구에서는 Brushless DC Motor의 전환구간에서 토크리플 저감을 위한 전류제어 기법을 제안하였다. 전환구간에서 토크리플은 증가하는 전류의 변화율과 감소하는 전류의 변화율이 같지 않음에 주원인이 있고, 실제 역기전력의 모양에 의해서도 영향을 받는다. 이에 제안된 제어기법은 전환하는 전류들의 변화율을 같게 하는 실제 역기전력이 고려된 보상전압을 추하고, 전환구간동안에만 보상전압을 인가함으로써 토크리플을 줄이는 것이다. 시뮬레이션과 실험 결과는 제안된 방법이 토크와 전류의 리플을 현저히 줄일 수 있음을 보여준다.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권6호
• /
• pp.34-41
• /
• 1993

전력 수요가 증가함에 따라 전력용 변압기의 용량이 커지고, 따라서 변압기사고의 파급효과가 커지게 된다. 본 논문은 전력용 변압기의 절연 열화에 의한 사고를 예방진단하기 위한 부분방전의 초음파 측정 기술을 응용하여, 초음파-초음파 측정법에 대한 부분방전점의 위치검출법을 연구하였다. 정확도를 높이기 위해 상호상관함수를 이용할 것을 제안하였으며 모의변압기에서 실험한 결과 만족할 만한 결과를 얻었다.