• Journal of Conservation Science
• /
• v.10 no.1 s.13
• /
• pp.31-37
• /
• 2001

The metallurgical investigation of four lumps of bronze from the third building site of the northern workshop site at the Neungsan-ri temple site in Buyeo was performed. The microstructures of a section of sample was observed by SEM and qualitative and quantitative analysis of the sample was performed by EDS. The results are as follows: Sample 1 of the lump of bronze from northern workshop site in the third building site at Neungsan-ri temple site and sample 2 are speculated to be low-quality bronze resulting from refinery of matte which formed on the process of bronze refinery. Sample 3 is speculated as a lump of bronze which is one of Cu-Sn system and the one made by alloy only with pure bronze and tin on the process of bronze refinery. Sample 4 is confirmed as a lump of bronze which is one of Cu-Sn-Pb system from alloy of tin and lead into pure bronze. It is believed that the third building site at Neungsan-ri temple site in Buyeo produced bronze matte by refinery of copper ore or produced low-quality bronze by melting matte imported from outside.

• Journal of Conservation Science
• /
• v.1 no.1 s.1
• /
• pp.27-39
• /
• 1992

Metallurgical studies of the bronze artifacts excavated from Miruksa Temple were performed by chemical analysis and metallographic observation. Alloy systems of the bronze artifacts were classified into two groups of Cu-Sn and Cu-Sn-Pb, according to the items. The contents of impurities such as Sb, As, Ni and Fe in bronze artifacts are within the limiting range of the mod ern standard bronze castings. Chemical compositions of the kitchen utensils such as bronze vessels and dishes in the Unified Silla dynasty, are in the follow ing range, Cu : 74.8-79.4% and Sn : 18.6-21.1%. Chemical composition of the Buddha-image in Koryo dynasty are 820Cu-7.0Sn-10.3Pb, showing increased Pb content and decreased Sn content. The results of chemical analysis suggest that the chemical compositions were good controlled. Any casting defects such as voids and shrinkage holes are not found microscopically, indicating high casting skill. Zinc atoms are not contained in the all bronze artifacts of Miruksa Temple site. This is the common facts founded in the east asian bronze artifacts of Korea, China and Japan. It is comparable with the European bronze of Cu-Sn-Pb-Zn system, after the Middle Age.

• Conservation Science in Museum
• /
• v.19
• /
• pp.69-82
• /
• 2018

The gilt-bronze standing Buddha and bronze standing Buddha statues excavated from Yeongguksa Temple in Yeongdong, currently held in the collection of the Cheongju National Museum, underwent conservation treatment after scientific study. Materials analysis showed that the gilt-bronze statue was made with a ternary alloy of copper, tin, and lead, while the bronze statue is of a binary alloy of copper and tin. The analysis also revealed that the bronze statue contains gold, and it is therefore recommended to change its description to gilt-bronze standing Buddha. The gilt-bronze statue appears to have been made with lead produced in Korea. The material observed on the surface that is presumed to have been used as an adhesive for the gold coloring is thought to be lacquer. For conservation treatment, the statues were minimally cleaned using physical and chemical methods and were treated through consolidation and protective coating.

• Tribology and Lubricants
• /
• v.25 no.3
• /
• pp.192-196
• /
• 2009

This paper presents the hardness and wear characteristic of bronze metals, which are manufactured by a sintering process with a high pressuring technology. A bronze metal with a high hardness and anti-wear properties is usually used for a high pressure cylinder and a pin-bush bearing. The new bronze metal in which is manufactured for this experimental study shows very high hardness of 192${\sim}$220 Hv compared with that of a conventional bronze metal of 120${\sim}$140 Hv. The high hardness of new bronze metals is strongly related to the radical reduction of wear volumes and an improved surface roughness of operated worn surfaces. As explained by previous many research works, the improved hardness of nonferrous metals may increase a load-carrying capacity and anti-wear properties of tribological components.

• The Pure and Applied Mathematics
• /
• v.29 no.4
• /
• pp.277-291
• /
• 2022

The aim of this article is to examine some types of slant submanifolds of bronze Riemannian manifolds. We introduce hemi-slant submanifolds of a bronze Riemannian manifold. We obtain integrability conditions for the distribution involved in quasi hemi-slant submanifold of a bronze Riemannian manifold. Also, we give some examples about this type submanifolds.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.61-70
• /
• 2004

The purposes of this study are to understand shapes, characteristics and source on the costume of musicians in Baekche gilt-bronze incense burner. Baekche accepted to incense burner as one of developed culture through exchange with China. Baekche gilt-bronze incense burner includes mixed Thought of Confucian, Buddhism and Taoism from China. The five musicians showed in Baekche gilt-bronze incense burner are symbols that include Confucian Ohang-thought and peaceful reign based on musical combination and arrangement. So, musicians in Baekche gilt-bronze incense burner to pray to God for Happiness showed as a kind of Genii. As a results of analyzing costume of musicians in Baekche gilt-bronze incense burner are as follows; Upper garments which open in the center front have wide sleeves and tie up in high waist position. Under garments are long and wide skirts. Those costume styles of musicians were to follow spreaded costumes in the Continent at that time. In conclusion, costume of musicians in Baekche gilt-bronze incense burner was showed to receive influence of costume style in China Whijinambukjo period.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.315-319
• /
• 2008

This paper presents the interface bonding characteristics between a phosphor bronze and a steel plate for pin-bush bearings. The pin-bush bearing is an important component in which is used to reduce a friction loss and a wear against the piston pin. The pin-bush bearing is manufactured by hot-pressing a phosphor bronze and a back metal of a steel plate. This paper investigated the bonding interface characteristics in which is manufactured by melting a copper based bronze and a steel plate. The hardness from the inner surface of a bronze to the outer one of steel has been measured using a Vickers hardness tester. The experimental results show that the hardness of a bronze is superior to that of the conventional bronze and the transient hardness of pin-bush bearings is gradually increasing to the hardness of the steel back metal. This means that the bonding interface zone of pin-bush bearings may be fabricated by defusing a bronze to the steel plate due to a density difference between two materials.

• Korean Journal of Materials Research
• /
• v.20 no.2
• /
• pp.82-89
• /
• 2010

Benzotriazole (B.T.A) which has been mainly used for the stabilization processing method of excavated copper and bronze artifacts is vaporized within 2~3 years after the usage because it is unstable at the acid conditions and cannot protect the surface of artifacts. In this study, NaOH method which has been used for the steel artifacts was applied as a stabilization process for the method of copper and bronze artifacts to gush chlorine ion out. For the reproduction of excavated samples, copper and bronze plates were dipped in 0.1M HCl for 26 hrs to form CuCl, rusted at $70^{\circ}C$ with RH 75% for the formation of corrosion products, and desalted in 0.1 M NaOH solution. The concentration of chlorine ion was measured by using ionchromatography. During the desalting process, a large quantity of chlorine ions was gushed out in early period and corrosion products were not additionally generated through the re-corrosion experiment. This NaOH desalting process was found to be a method of stabilization process for copper and bronze artifacts from the formation of Tenorite (CuO) during desalting as a protection layer for corrosion.

• Journal of Conservation Science
• /
• v.1 no.1 s.1
• /
• pp.60-79
• /
• 1992

In relation to the scientific conservation treatment of ancient gilt bronze, the gold film coated on the bronze excavated from Hwangnam Great Tomb of Old Silla Kingdom(A. D. 5C) was studied in the view of coating technology and metallurgy of bronze. The uniform and dense gold film containing $2.44\sim12.40%$ of Hg with the thickness of $5.99\sim12.97{\mu}m$ was found to be coated on the bronze objects by amalgam coating method. On silver objects, the film with the thickness of $19.96{\mu}m$ was coated also continously and uniformly with gold by the same method. The bronze objects was fabricated by forging technique and contained almost $4.7\sim11.5%$ of Pb. Its microstructure was $\alpha-phase$ solid solution including Pb segregation in the matrix. The amount of $0.4\sim2.0%$ Zn was added in the bronze for the purpose of easy fabricating of Cu alloy. Based on the data studied, the gold film on bronze sample was reproduced by amalgam coating method and compared with the ancient gold film.

• Journal of Surface Science and Engineering
• /
• v.46 no.5
• /
• pp.197-207
• /
• 2013

In the midst of increasing importance of modern cultural assets, especially, most modern bronze objects are exposed to outdoor environment, and as the objects are corroded steadily due to environmental factors the objects lost their original colors on the surface. We performed artificial patinas on the bronze sample per each color of red, black and green and checked cuprite and tenorite which are detected from actual bronze corrosion by analyzing the components. In addition, we applied the existing corrosion removal methods of grinder and sand blaster on a similar sample of bronze mirror per injection pressure and performed comparative analysis on the result with Nd:YAG laser. As a result of Nd:YAG laser cleaning artificial patina from bronze samples, all of the patinas were removed by laser wavelength 1064 nm better than 532 nm. Upon applying to a similar sample of bronze mirror, the artificial patina could be selectively removed from substrates without surface damage when Nd:YAG laser was conducted other than the existing removal method, and so it showed the possibility of application.