• Journal of the Society of Naval Architects of Korea
• /
• v.48 no.5
• /
• pp.421-425
• /
• 2011

To know the speed performance of "ARAON" in Arctic ice field, the measurement of ice properties which is ice thickness & strength, snow depth and free board were performed on July 2010. The measuring method of nautical signals such as heading angle, power of engine, wind & current information etc. was described in this paper. The speed sea trials in ice were performed on the four different positions with different ice properties and engine powers because the uniform level ice is not detected in the Chukchi Sea. The test field was partially constrained ice floe with hummocks and it was superposed with small broken ice pieces each other. All of the measured ice properties were compared and evaluated according to the results of sea trial. The relations between speed, ice thickness, strength and power were summarized. Consequently according to the sea trial results, the speed of ARAON is 2.78knots at the 2.49m ice thickness with 6.55MW engine power.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.1
• /
• pp.66-72
• /
• 2016

The aim of this paper is to investigate the characteristics of the signal of local ice load acting on side shell in the bow part due to ice broken by an icebreaker in ice-covered waters. The Korean icebreaking research vessel "ARAON" voyaged to the Arctic Ocean during the summer of 2010, and measurements of local ice load were carried out using several strain gauges. In this study, the time history of measured signals was analyzed and the characteristic values including rising time and half-decaying time were presented using non-dimensional parameters.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.6
• /
• pp.353-364
• /
• 2020

This paper presents the semi-analytical ice load calculation methods that are useful to simulate the ice-breaking process. Since the semi-analytical methods rely on the previously developed closed form equations or numerical analysis results, the user's exact understanding for the equations must be supported in order to use the methods properly. In this study, various failure modes of ice such as local crushing, in-plane splitting failure, out-of-plane bending failure and radial or circumferential cracking with rotation of the broken ice floe are considered. Based on the presented methods, the fracture modes were evaluated according to the size and thickness of ice. In addition, time series analysis for the ice-breaking process was performed on several ice conditions and the results were analyzed.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.3
• /
• pp.175-181
• /
• 2021

This study describes the model tests in ice according to the frictional coefficient of an ice-breaking ship and the change in ice resistance by the analysis method for each component of ice resistances. The target vessel is a 90K DWT ice-breaking tanker capable of operating in ARC7 ice conditions in the Arctic Ocean, and twin POD propellers are fitted. The hull was specially painted with four different frictional coefficients on the same ship model. The total ice resistance can be separated by ice breaking, ice buoyancy, ice clearing resistances through the tests in level ice, pre-sawn ice and creep test in pre-sawn ice under sea ice thickness of 1.2 m and 1.7 m. Ice resistance was analyzed by correcting the thickness and bending strength of model ice by the ITTC correction method. As the frictional coefficient between the hull and ice increases, ice buoyancy and clearing resistances increase significantly. When the surface of the hull is rough, it is considered that the broken ice pieces do not slip easily to the side, resulting in an increase in ice buoyancy resistance. Also, the frictional coefficient was found to have a great influence on the ice clearing resistance as the ice thickness became thicker.

• Ocean and Polar Research
• /
• v.33 no.1
• /
• pp.1-11
• /
• 2011

This study describes measurements of fast ice recorded on May 23, 2009, in Kongsfjorden (translated as 'Kongs Fjord'), an inlet on the west coast of Spitsbergen in the Svalbard Archipelago. Seasonal fast ice is an important feature for Svalbard fjords, both in relation to their physical environment and also the local ecosystem, since it grows seaward from the coast and remains in place throughout the winter. Ice thickness, snow, ice properties, and wind speed were measured, while SAR (Synthetic Aperture Radar) data was observed simultaneously observed two times from ALOS-PALSAR (L-band). Measured ice thickness was about 25-35 cm while the thickness of ice floe broken from fast ice was measured as 10-15 cm. Average salinity was 1.9-2.0 ppt during the melting period. Polarimetric data was used to extract H/A/alpha-angle parameters of fast ice, ice floe, snow and glacier, which was classified into 18 classes based on these parameters. It was established that the area of fast ice represents surface scattering which indicates low and medium entropy surface scatters such as Bragg and random surfaces, while fast ice covered with snow belongs to a zone of low entropy surface scattering similar to snow-covered land surfaces. The results of this study will contribute to various interpretations of interrelationships between H/A/alpha parameters and the wave scattering Phenomenon of sea ice.

• Journal of the Korean Institute of Navigation
• /
• v.15 no.3
• /
• pp.73-97
• /
• 1991

The analysis and investigation are described for White's[2] equations compared to the equations of Runeburg[3] and Milano[5] for continuous icebreaking mode, Tunik[8-1] and Ghoneim[8-2] for ramming icebreaking mode. Calculation results compare reasonably well with published model-scale and full-scale icebreaker data by Baker[1] and Dick[11]. During continuous and ramming mode operation, using characteristics of an incebreaker, down ward force on ice and standard ice thickness broken are predicted. Additionally draft, trim and extraction difficulty are also predicted. The bow part line of an icebreakin $g^{ply}$ vessel is designed aiming to maximize the ice breaking capabiltiy as following conditions-low bow angle[20 degrees] at designed waterline, small spread angle complement [6 degrees] at designed waterline, small spread angle complement [6 degrees] and high propeller thrust [220tons]. with plow, two reamers and wave type bumper.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.143-148
• /
• 2013

The aim of this study is to investigate the characteristics on the profile of local ice load acting on side shell of port side in bow part due to broken ice during icebreaking of ships in ice covered waters. The first Korean icebreaking research vessel 'ARAON' had a sea ice field trial in the Arctic Sea during early August, 2010, and the signals due to local ice impact measured from several strain gauges installed at bow part were gathered. It is known that these data with structural response characteristics due to local ice impact have some different characteristics with a typical hydraulic impact pressure - time history. In this study, the time history on the measured signals was analyzed and the characteristic values were presented using non-dimensional parameters.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1350-1364
• /
• 2019

The ice damage occurs frequently in cold and dry region of western China in winter ice period and spring thaw period. In the drift ice condition, it is easy to form different extrusion force or impact force to damage tunnel lining, causing project failure. The failure project could not arrive the original planning and construction goal, giving rise to the water allocation pressure which influences diversion irrigation and farming production in spring. This study conducts the theoretical study on contact-impact algorithm of drift ices crashing diversion tunnel based on the symmetric penalty function in finite element theory. ANSYS/LS-DYNA is adopted as the platform to establish tunnel model and drift ice model. LS-DYNA SOLVER is used as the solver and LS-PREPOST is used to do post-processing, analyzing the damage degrees of drift ices on tunnel. Constructing physical model in the experiment to verify and reveal the impact damage mechanism of drift ices on diversion tunnel. The software simulation results and the experiment results show that tunnel lining surface will form varying degree deformation and failure when drift ices crash tunnel lining on different velocity, different plan size and different thickness of drift ice. The researches also show that there are damages of drift ice impact force on tunnel lining in the thawing period in cold and dry region. By long time water scouring, the tunnel lining surfaces are broken and falling off which breaks the strength and stability of the structure.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.87-97
• /
• 1992

Of various design factors affecting icebreaking capability of an icebreaker, the stem angle(i.e., angle between bow stem and ice sheet) is the most important one under continuous icebreaking operation. This study focuses on the relationship between the bow stem angle of an icebreaker and its icebreaking capability. Considering relatively high loading-rate conditions with typical advancing speed of 3 to 4 knots, the material properties and deformation characteristics of sea ice are regarded as entirely elastic and brittle. In this paper the interaction process of icebreaker with level ice is simplified as a beam of finite length supported by Winkler-type elastic foundation simulating water buoyancy. The wedge type ice beam is loaded by the vertical impact forces due to the inclined bow stem of icebreaking vessels. The numerical model provides locations of maximum bending moment where extreme tensile stress arises and also possible fracture occurs. The model can predict a characteristic length of broken ice sheet upon the given environmental and design parameters.

• Journal of the Korean Society of Safety
• /
• v.28 no.1
• /
• pp.1-5
• /
• 2013

In this paper, the finite element analysis using ADINA has performed to investigate an accident that a man's head was damaged by the falling object. The simulation condition has defined by the point of forensic medicine view and the CCTV image analysis. From the CCTV image analysis, we expected that the sphere diameter of object is 15cm and object color is white. Assuming the falling mass is the ice mass, the results of the ADINA simulation show that a man's head can be broken by the falling ice mass.