• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.414-419
• /
• 2012

The evaluation of a zonal RANS-LES approach is documented for the prediction of broadband noise generated by the flow past unmodified and serrated airfoil trailing edges at a high Reynolds number. A multi-domain decomposition is considered, where the acoustic sources are resolved with a LES sub-domain embedded in the RANS domain. A stochastic vortex method is used to generate synthetic turbulent perturbations at the RANS-LES interface. The simulations are performed with a general-purpose unstructured control-volume code FLUENT. The far-field noise is calculated using the aeroacoustic analogy of Ffowcs Williams-Hawkings. The results of the simulation are validated through the full-scaled wind turbine acoustic measurements. It is found that the present approach is adequate for predicting noise radiation of serrated trailing edge flow for low noise rotor system.

• 한국소음진동공학회논문집
• /
• 제22권5호
• /
• pp.444-450
• /
• 2012

The evaluation of a zonal RANS-LES approach is documented for the prediction of broadband noise generated by the flow past unmodified and serrated airfoil trailing edges at a high Reynolds number. A multi-domain decomposition is considered, where the acoustic sources are resolved with a LES sub-domain embedded in the RANS domain. A stochastic vortex method is used to generate synthetic turbulent perturbations at the RANS-LES interface. The simulations are performed with a general-purpose unstructured control-volume code FLUENT. The far-field noise is calculated using the aeroacoustic analogy of Ffowcs Williams-Hawkings. The results of the simulation are validated through the full-scaled wind turbine acoustic measurements. It is found that the present approach is adequate for predicting noise radiation of serrated trailing edge flow for low noise rotor system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.375-378
• /
• 2001

A 640Gb/s very advanced ATM switching system using 0.25um CMOS VLSI, 40 layer ceramic MCM and 10Gb/s, 8 wavelength 8$\times$8 optical WDM interconnection has been fabricated. To break though the interconnection bottleneck, optical WDM interconnection is used. It has 20Gb/s 8 wavelength 8$\times$8 interconnection capability. It realizes 640Gb/s interconnections within a very small size. Preliminary tests show that 800b1s ATM switch MCM and optical WDM interconnection technologies can be applied to future high speed broadband networks

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.610-612
• /
• 2013

A novel balanced distributed amplifier (DA) was proposed using novel impedance transforming MEMS baluns. The impedance transforming MEMS balun is matched to $50{\Omega}$ at one input port and $25{\Omega}$ at two output ports. It is based on the electric field mode-change method, thus it is strongly independent of frequency and very compact. The novel balanced DA consists of two $25{\Omega}$-matched DAs and these are combined by $50{\Omega}$-to-$25{\Omega}$ baluns. Theoretically, it has two times wider bandwidth and power capability than the conventional DA. So as to verify the proposed concept, we designed and fabricated a conventional DA and the proposed one using 0.15-${\mu}m$ GaAs pHEMT technology.

• 한국콘텐츠학회논문지
• /
• 제6권2호
• /
• pp.9-16
• /
• 2006

본 논문은 광대역 무선 통신망의 물리계층 OFDMA시스템 구조에서 멀티미디어 패킷 서비스의 효율적인 처리를 위한 스케줄링 알고리즘을 제안한다. 스케줄링 알고리즘은 무선 채널 상태 정보 추정을 이용하고 클래스 및 우선권 정책 기반 전송 순위 결정과 이에 의한 전송률 할당을 한다. 그 결과로 제안된 스케줄링 알고리즘은 실시간 서비스에 대해선 최대 트래픽 처리량과 jitter의 최소화를 만족하고 비실시간 서비스에 대해 공평한 트래픽 처리를 수행한다. 제안 된 스케줄링 알고리즘은 기존의 라운드 로빈 스케줄링 방식과 시뮬레이션을 통한 비교를 통해서 보다 우수한 성능을 보인다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1991년도 춘계공동학술대회 발표논문 및 초록집; 전북대학교, 전주; 26-27 Apr. 1991
• /
• pp.464-464
• /
• 1991

We address the problem of designing a physical CATV network with switched-star topology in which the broadband interactive service is provided. There are two types of decision variables: One is where to place conduit paths, and the other is how many cable units to be installed on each link traversed by an established conduit path. Due to the serious drawback of the conventional approach partitioning the problem into two subproblems, the unified approach handled in one setting is used here to attack the whole problem without dividing into two ones. In this paper, we present a mathematical design model and propose an efficient solution method exploiting the nice structure of it. In addition to this physical design, some results on logical network configuration have also been made. Finally, computaional experiments are conducted to illustrate the efficiency of our design approach.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.839-843
• /
• 2005

본 논문에서는 VHF 송수신기 셋트에 쉽게 장착할 수 있는 해상용 광대역 수신증폭기를 소형 경량, 저비용으로 제작하여 전반적인 수신기의 수신성능을 개선하고자 한다. 제작된 수신 증폭기는 140MHz $\~$ 170MHz 주파수 대역에서 3dBm 정도의 수신감도를 개선하는 특성을 나타내었다. 따라서 VHF대역을 이용하는 통신장비를 더욱 효율적으로 사용가능하며, 양질의 원거리통신이 가능하기 때문에 활용도가 매우 높을 것으로 사료된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.520-525
• /
• 2003

Supersonic jet issuing from a nozzle invariably cause high-frequency noises. These consist of three principal components ; the turbulent mixing noise, the broadband shock-associated noise, and the screech tone. In present study, it was experimentally investigated to the effect of nozzle lip thickness on the characteristics of supersonic jet noise. The convergent-divergent nozzle of a design Mach number 2.0 was used in experiment. With three different nozzle-lip thicknesses, the jet pressure ratio was varied in the range between 2.0 and 12.0. Acoustic measurements were conducted by microphones in an anechoic room, and the major structures of the supersonic jets were visualized by a Schlieren optical system to investigate the effect of nozzle lip thickness. The measured results show that the characteristics of supersonic jet noise, such as overall sound pressure level (OASPL) and screech frequency, strongly depend upon the thickness of nozzle-lip.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.3-11
• /
• 2002

This paper presents the trend of low voltage and high current technology for DC-DC converters. It can be said that the output voltage of the on-board power supply has been rapidly moving forward a low voltage in proportion to the minuteness of the semiconductors. As for as its speed is concerned, the change of the market situation seems to be faster than that of R&D for the low voltage and high current products put out by power supply manufacturers. Here, the present situation and the trend of non-isolated type step-down DC-DC converter and isolated type DC-DC converter called "Brick" will be taken up mainly from the fellowing point of view. -low voltage and high current keeping up with the current demand for the latest telecommunication networks and broadband. -build-up of the total solution for dispersion system power supply. In this paper, an explanation is given to mainly concerning to the newest products in the supplier's position.

• Journal of Communications and Networks
• /
• 제4권4호
• /
• pp.292-301
• /
• 2002

Wireless LAN technology is complementary to 3G systems and could be used to provide high bandwidth hotspot coverage, for example in railway stations and offices, in order to provide the high bandwidth video and broadband services such as those emerging on DSL fixed access. The IST Projects BRAIN and MIND have investigated a number of key technical enablers for such a system beyond 3G. These include scenarios and business models, design of an all-IP access network, consideration of ad hoc network extensions, enhancing Wireless LAN efficiency and compatibility with IP and, finally, terminal middleware and signalling for rapid adaptations to network QoS changes.