• 비파괴검사학회지
• /
• 제29권6호
• /
• pp.570-578
• /
• 2009

Excitation and propagation of guided waves are very complex problems in pipes due to their dispersive nature. Pipes are commonly used in the oil, chemical or nuclear industry and hence must be inspected regularly to ensure continued safe operation. The normal mode expansion(NME) method is given for the amplitude with which any propagating waveguide mode is generated in the pipes by applied surface tractions. Numerical results are calculated based on the NME method using different sources, i.e., non-axisymmetric partial loading and quasi-axisymmetric loading sources. The sum of amplitude coefficients for 0~nineth order of the harmonic modes are calculated based on the NME method and the dispersion curves in pipes. The superimposed total field which is namely the angular profile, varies with propagating distance and circumferential angle. This angular profile of guided waves provides information for setting the transducer position to find defects in pipes.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.317-322
• /
• 2005

Synthetic Aperture Radars(SAR) are used mainly for high-resolution imaging of the terrain. This paper describes the 16$\times$16 array antenna designed for an X-band, automobile-based SAR(AutoSAR) system. This antenna has the structure of several layers such as radome, radiators, slots, feed network, and honeycomb cores. Each layer is adhesively bonded to meet different combination of structural and electrical design requirements. Using the Strip-Slot-Foam-Inverted-Patch(SSFIP) structure and dogbone slots, a wide bandwidth and a structural hardness were achieved. Measurement results were compared with simulation results. It was observed that the SAR antenna had a bandwidth of 1.7 GHz, side-lobe levels of less than -20 dB, half-power beamwidth of 5$^{\circ}$, and gains of 25.0 dBi. The observed results show that the designed array antenna is suitable for the broadband AutoSAR system.

• 대한전자공학회논문지
• /
• 제21권4호
• /
• pp.65-71
• /
• 1984

초음파 B스캔너의 경우 광대역 펄스를 사용하기 때문에 광학에서 사용되는 집속 계산식으로는 초음파 집속 시스템을 정확하게 설계할 수 없다. 본 연구에서는 초음파 다중소자에 광대역 펄스가 여기될 때 초음파의 전파모양을 정확하게 계산할 수 있늘 방법이 연구되었다. 계간된 초음차의 전파 모양을 이용하여 고해상력을 갖는 다이나믹 집속(dynamic focusing)시스템의 구동소자수, 집속치로 지연값 및 집속점 위치등을 설계하도록 하였다. 저잡음 스튀칭 특성을 갖는 다이나믹 집속 시스템을 구성하여 실험에 의해 3.5MHz선형소자로써 18cm의 깊이까지 2∼3mm의 해상도가 얻어짐을 확인하였다.

• 한국통신학회논문지
• /
• 제33권10B호
• /
• pp.919-927
• /
• 2008

실시간 및 고품질 특성에 대한 멀티미디어 요구 증대는 응용의 광대역화를 촉진시키며 네트워크 및 시스템 측면의 요구 사항을 증대시킨다. 본 논문은 고화질 HD(high definition) 영상을 소프트웨어 기반으로 실시간 압축하는 DXT 부호화와 초고속 네트워크 전송을 효과적으로 결합하는 프로토타입 시스템의 구현을 다룬다. 특히 구현된 프로토타입 시스템을 통해 광대역 응용에 요구되는 미디어 압축과 전송을 위한 네트워크 및 시스템 특성을 살펴본다. 개발 구축된 시스템의 성능 검증을 위해 과학기술연구망에 테스트베드를 구축하고 종단 간 전송 실험을 통해 효용성을 입증한다.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.235-256
• /
• 2005

The non-linear behaviour of electrorheological (ER) and magnetorheological (MR) dampers makes it difficult to design effective control strategies, and as a consequence a wide range of control systems have been proposed in the literature. These previous studies have not always compared the performance to equivalent passive systems, alternative control designs, or idealised active systems. As a result it is often impossible to compare the performance of different smart damper control strategies. This article provides some insight into the relative performance of two MR damper control strategies: on/off control and feedback linearisation. The performance of both strategies is benchmarked against ideal passive, semi-active and fully active damping. The study relies upon a previously developed model of an MR damper, which in this work is validated experimentally under closed-loop conditions with a broadband mechanical excitation. Two vibration isolation case studies are investigated: a single-degree-of-freedom mass-isolator, and a two-degree-of-freedom system that represents a vehicle suspension system. In both cases, a variety of broadband mechanical excitations are used and the results analysed in the frequency domain. It is shown that although on/off control is more straightforward to implement, its performance is worse than the feedback linearisation strategy, and can be extremely sensitive to the excitation conditions.

• ETRI Journal
• /
• 제32권4호
• /
• pp.566-576
• /
• 2010

In a multiview video system, interactivity is important for users and should be considered in the design of multiview video coding (MVC). In this paper, we present an interactivity evaluation model for MVC schemes by using both weighted random graph and Markov approaches. The main factors that affect both the interactivity and rate-distortion (RD) performances of MVC schemes are analyzed and discussed in detail. By taking these factors into consideration, a new MVC scheme is proposed for high interactivity and RD gains. Experimental results show that the proposed scheme has a significant interactivity gain with little coding loss, compared to the state-of-the-art benchmark. As an extension to RD performance analysis, the interactivity evaluation model can be used as a design tool of alternative schemes for a future interactive multiview video system.

• 대한전자공학회논문지TC
• /
• 제42권12호
• /
• pp.53-62
• /
• 2005

본 논문은 휴대인터넷시스템의 수동피코셀 제안과 엑세스포인트와 수동형 피코셀간의 Radio over Fiber(ROF)접속 구도에 대한 것이다. 휴대인터넷시스템(Wibro)은 시속 60km의 중속도의 이동 단말에 50Mbps의 IP 기반 데이터서비스를 제공하는 것이다. 따라서, 서비스를 제공하기 위하여 초기에 셀의 구축비용을 최소화 하는 것이 요구된다. 본 논문은 이러한 요구사항을 만족하는 수동형 피코셀을 제안하고 이의 접속구도에 대하여 제안한 것이다. 기존의 Fabry-Perot(FP) 레이저를 채용하는 ROF 링크의 특성과 수동형Electro-absorption Modulator(EAM)를 이용한 수동형 피코셀의 특성을 측정하여 Wibro시스템에 이의 접속 가능성을 보이고 수동형피코셀의 RF 커버리지를 해석하여 가능성을 검증하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.775-780
• /
• 2013

In recent years, a notebook like an ultrabook gets thinner. Its thickness causes problems in cooling fan performance, system installation condition, and so on. In this study, we installed a small turbofan in notebook system with very narrow gap in order to generate similar condition to a real product. Experiments were performed to measure the fan's performance and the flow and noise characteristics, its results were compared with computational ones. Prediction of P-Q curve using CFD showed under about 5% error in high flow rate and its trend was agreed with experimental one over the flow field. Experimental data to measure the noise at a distance of 100 mm from a rotation axis direction of an impeller corresponded well with computational ones of broadband and BPF noise. The noise experiments to measure at a distance of 100 mm from a rotation axis direction of an impeller corresponded well with computational ones of broadband and BPF noise. Especially, tip part of impeller blade and part of exit and bottom near in an analysis by a commercial program(FlowNoise).

• 한국융합학회논문지
• /
• 제10권4호
• /
• pp.147-151
• /
• 2019

현대인들은 가정, 학교 혹은 직장, 병원, 쇼핑몰, 지하철역과 객실, 주차장 등 일상생활의 대부분을 실내에서 보내게 된다. 이렇듯 실내에 갇힌 현대인들은 갇힌 공기 속에서 살아갈 수밖에 없다. 이에 실내 공기질 향상을 위한 공기정화장치는 많이 개발되었으나 대다수의 공기정화장치는 필터에 의한 필터링과 유해세균 살균방식에 있어 자외선이라는 제한된 영역에서의 살균방식에 국한 할 수밖에 없었다. 여기서는 실내 공기질 향상은 물론 원천적으로 실내공기중의 부유 세균을 제거하고, 자외선뿐만 아니라 가시광선에서도 활동하는 광촉매를 적용한 미디어광촉매필터를 활용한 광대역대 활성광촉매를 활용한 융 복합 구조 공기살균정화장치 개발하고자 한다.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.32-38
• /
• 2022

Erbium-doped fiber amplifiers (EDFAs) have saturated the technological market but are still widely used in high-speed and long-distance communication systems. To overcome EDFA saturation and limitations, its erbium-doped fiber is co-doped with other materials such as zirconia and bismuth. This article demonstrates and compares the performance using three different fibers as the gain medium for zirconia-erbium-doped fibers (Zr-EDF), bismuth-erbium-doped fibers (Bi-EDF), and commercial silica-erbium-doped fibers (Si- EDF). The optical amplifier was configured with a double-pass amplification system, with a broadband mirror at the end of its configuration to allow double-pass operation in the system. The important parameters in amplifiers such as optical properties, optical amplification and noise values were also examined and discussed. All three fibers were 0.5 m long and entered with different input signals: 30 dBm for low input and 10 dBm for high input. Zr-EDF turned out to be the most relevant optical amplifier as it had the highest optical gain, longest transmission distance, highest average flatness gain with minimal jitter, and relevant noise figures suitable for the latest communication technology.