• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.37-41
• /
• 2021

In this paper, a low-profile and broadband bowtie antenna using multi-layer substrate for UWB sensor application is presented. A compact bowtie antenna is designed and implemented on two multi-layered substrate with total thickness of 4.5 mm. The antenna consists of bowtie radiator and planar-type balun. The designed radiator and balun are connected to each other so that it can be easily implemented in various structures. The implemented antenna provides 3 to 6 dBi of gain for whole frequency range from 6.8 to 10 GHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.564-566
• /
• 2012

In this paper, a design method for a compact broadband planar monopole antenna fed by coplanar waveguide (CPW) is studied. The proposed broadband monopole is optimized for terrestrial digital television (DTV) receiving. The monopole is fed by a CPW with 75-ohm characteristic impedance on an FR4 substrate and its size is $100mm{\times}200mm$. A pair of slit is appended for size reduction and an inductive stub is loaded for the impedance matching between the feedline and monopole. The optimized monopole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.4 s.95
• /
• pp.359-365
• /
• 2005

This paper designed a very low profle, light and broadband internal antenna for operating at PCS, IMT-2000 and Wibro bands. The proposed antenna can be reduced the size by using shorting-pin and a broadband characteristic is obtained by using slit. It is optimized by using the CST Microwave Studio commercial software based on the FIA(Finite Integration Algorithm) and PBA(Perfect Boundary Approximation) and then fabricated and measured. As a result of measurement, the bandwidth(VSWR<2.5) is $40.8\;\%$ at $1.934\;\cal{GHz}$ and the size of antenna is 3$30\;\cal{mm}\times10\;\cal{mm}\times0.2\;\cal{mm}$.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.880-882
• /
• 2004

This paper presents the design and simulation results of 7 waveguide dielectric rod array antennas for 7 channel DBF(Digital beamformer) receivers for stratospheric system. A waveguide. dielectric antenna type, which has FTEP(Flat-toped element pattern) to manufacture easily. Also, the calculated element patterns according to the permittivity are compared. The designed antenna will be used for generating multibeam radiation pattern by means DBF.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.33-40
• /
• 2006

A compact broadband active composite dipole antenna for direction finding system at the V/UHF-band is presented. It uses the composite structure which improves the antenna gain and the active circuit for broadband operation. This type of antenna has a high gain more than that of one dipole antenna within limited length(1m). The basic design and performance of both antenna structure and integrated active circuit are presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.250-256
• /
• 2002

In this paper, a broadband sleeve monopole antenna using a loading coil in sleeve is proposed. The center frequency of the proposed antenna is 1,990MHz. The antenna of the proposed structure has the same of the single sleeve monopole antenna, except for using the coil instead of the inner conductor in sleeve. As a result, it is found that the bandwidth is 1.239~2.154 GHz(above 53.9 %) for $S_{11}=-10\;d B$(VSWR<2), and the antenna impedance is good for a communication system and feeder which the impedance has 50 Ω.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.603-604
• /
• 2006

A small size broadband microstrip patch antenna with small ground plane has been fabricated using MEMS. Multiple layer of high and low dielectric substrates are used to realize small size and broadband characteristics. The microstrip patch is divided into 4 pieces and each patch is connected to each other using a metal microstrip line. The fabrication process is very simple and only one mask is needed. Two types of microtrip antennas are fabricated. Type A is the microstrip antenna with metal lines and type B is the microstrip antenna without metal lines. The size of proposed microstip antenna is $8*12*2mm^3$ and the experimental results show that the antenna type A and type B have the bandwidth of 420MHz at 5.3 GHz and 480MHz at 5.66 GHz, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.1996-2002
• /
• 2013

In this paper, a design method for a compact broadband planar monopole antenna fed by a coplanar waveguide (CPW) is studied. The proposed broadband monopole is optimized for terrestrial digital television (DTV) reception. In order to achieve broadband characteristics, the monopole and ground conductor are gradually tapered. By loading slit pairs on both monopole and ground plane, the proposed antenna is miniaturized. The monopole is fed by a CPW with 75-ohm characteristic impedance on an FR4 substrate and its size is $100mm{\times}200mm$. The optimized monopole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.39-46
• /
• 2014

In this paper, to operate 2.4 GHz Inverted-L antenna with On-Board Broadband characteristics is proposed. The antenna was designed on the system board, the bandwidth by adjusting the reactance of the antenna that was formed common-mode and differential-mode on the antenna stubs has been improved. The system size is $80mm{\times}60mm$, the size of the antenna was limited to $30mm{\times}60mm$, the thickness of FR4 dielectric substrate is 0.8 mm, FR4 dielectric constant 4.4 is used. The experimental results, the bandwidth from 17.2 to 24.1 %, the gain is 3.01~4.71 dB, omni-directional radiation pattern characteristics were obtained. By a mobile terminal design applying the results of the paper, the handset's price competitiveness and production efficiency can be improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.61-62
• /
• 2013

In this paper, a design method for a compact broadband planar dipole antenna fed by a microstrip (MS) line is studied. The proposed broadband dipole is optimized for terrestrial digital television (DTV) receiving. The dipole is fed by an MS line with 75-ohm characteristic impedance on an FR4 substrate and its size is $90mm{\times}180mm$. The dipole is modified to half bow-tie type for size reduction. A simplified balun is adopted for the impedance matching between the MS line and coplanar strip which feeds the dipole. The optimized dipole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.