• Title/Summary/Keyword: Broadband Communication

Search Result 682, Processing Time 0.021 seconds

Design of the Broadband Microstrip Bow-tie Patch Antenna for a Subsurface Radar (표면하 레이더용 광대역 마이크로스트립 보우타이 패치 안테나 설계)

  • 김민준;곽영복
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.6 no.8
    • /
    • pp.1305-1309
    • /
    • 2002
  • Subsurface radar characterize a broadband frequency to collect a information, such as a crack of building, because of using narrow pulse. In this paper, we design a broadband bowtie antenna, using a microstrip, with a FR-4 substrate of ${\varepsilon}_r=4.0$, t=1.6mm. It has a 9.31% bandwidth at s11<-10 dB and s11=-27.45 dB, VSWR=1.089 at 5.78GHz.

Estimation of Equivalent Circuit Parameters for Dual Resonance Electroacoustic Transducer Using Iterative Levy Method (두 개의 공진점을 갖는 광대역 초음파 전기음향 변환기의 등가회로변수 추정)

  • Lim, Jun-Seok;Pyeon, Yong-Guk
    • 전자공학회논문지 IE
    • /
    • v.49 no.2
    • /
    • pp.18-23
    • /
    • 2012
  • A method to determine the equivalent circuits of broadband ultrasound transducers is necessary for designing filters that match the impedances of the transducer and the analysis of the transducer. A method is proposed to determine the equivalent circuits of broadband transducers with 2 resonances in the frequency band of interest. The circuit parameters are estimated by iterative Levy method with the measured electrical conductance data. The method is illustrated by computing the conductance and susceptance of the equivalent circuits of 3 types of broadband transducers. The equivalent circuit of a transducer.

Broadband Amplifier Using Active Feedback Technique (Active Feeback를 이용한 MMIC 광대역 증폭기 설계)

  • Kang, T. S.;An, D.;Yoon, Y. S.;Rhee, J. K.
    • Proceedings of the Korea Electromagnetic Engineering Society Conference
    • /
    • 2000.11a
    • /
    • pp.197-201
    • /
    • 2000
  • In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ~3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

  • PDF

Design of Tx/Rx Broadband Antenna on LTCC at K/Ka Band (LTCC 공정을 이용한 K/Ka 대역 송수신 겸용 이중 급전 안테나)

  • 천영민;김성남;오민석;최재익;표철식;이종문;천창율
    • The Transactions of the Korean Institute of Electrical Engineers C
    • /
    • v.53 no.9
    • /
    • pp.481-487
    • /
    • 2004
  • The Ku band that has been using for the satellite communication and broadcasting would be changed to K/Ka bands. The satellite system requires the antenna structure to fabricate low loss and small antenna that is able to be integrated with other Rf circuits for both Rx and Tx. So we should design it with dual feed antennas at K/Ka bands, high isolation between two different feeds and broadband circular polarization. This paper proposes the LTCC(Low Temperature Co-fired Ceramic) process for integration with other Rf circuits and the Axial mode of the helical antenna to satisfy those requirements.

The Design of the Broadband Sleeve Monopole Antenna using Loading Coil (로딩 코일을 이용한 광대역 슬리브 모노폴 안테나의 설계)

  • 최광제
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.13 no.3
    • /
    • pp.250-256
    • /
    • 2002
  • In this paper, a broadband sleeve monopole antenna using a loading coil in sleeve is proposed. The center frequency of the proposed antenna is 1,990MHz. The antenna of the proposed structure has the same of the single sleeve monopole antenna, except for using the coil instead of the inner conductor in sleeve. As a result, it is found that the bandwidth is 1.239~2.154 GHz(above 53.9 %) for $S_{11}=-10\;d B$(VSWR<2), and the antenna impedance is good for a communication system and feeder which the impedance has 50 Ω.

Terminal-Assisted Hybrid MAC Protocol for Differentiated QoS Guarantee in TDMA-Based Broadband Access Networks

  • Hong, Seung-Eun;Kang, Chung-Gu;Kwon, O-Hyung
    • ETRI Journal
    • /
    • v.28 no.3
    • /
    • pp.311-319
    • /
    • 2006
  • This paper presents a terminal-assisted frame-based packet reservation multiple access (TAF-PRMA) protocol, which optimizes random access control between heterogeneous traffic aiming at more efficient voice/data integrated services in dynamic reservation TDMA-based broadband access networks. In order to achieve a differentiated quality-of-service (QoS) guarantee for individual service plus maximal system resource utilization, TAF-PRMA independently controls the random access parameters such as the lengths of the access regions dedicated to respective service traffic and the corresponding permission probabilities, on a frame-by-frame basis. In addition, we have adopted a terminal-assisted random access mechanism where the voice terminal readjusts a global permission probability from the central controller in order to handle the 'fair access' issue resulting from distributed queuing problems inherent in the access network. Our extensive simulation results indicate that TAF-PRMA achieves significant improvements in terms of voice capacity, delay, and fairness over most of the existing medium access control (MAC) schemes for integrated services.

  • PDF

Ultra Broadband Indoor Channel Measurements and Calibrated Ray Tracing Propagation Modeling at THz Frequencies

  • Priebe, Sebastian;Kannicht, Marius;Jacob, Martin;Kurner, Thomas
    • Journal of Communications and Networks
    • /
    • v.15 no.6
    • /
    • pp.547-558
    • /
    • 2013
  • Ultra broadband communication systems operated at THz frequencies will require the thorough knowledge of the propagation channel. Therefore, an extensive measurement campaign of 50 GHz wide indoor radio channels is presented for the frequencies between 275 and 325 GHz. Individual ray paths are resolved spatially according to angle of arrival and departure. A MIMO channel is recorded in a $2{\times}2$ configuration. An advanced frequency domain ray tracing approach is used to deterministically simulate the THz indoor propagation channel. The ray tracing results are validated with the measurement data. Moreover, the measurements are utilized for the calibration of the ray tracing algorithm. Resulting ray tracing accuracies are discussed.

Hyper-encryption Scheme for Data Confidentiality in Wireless Broadband (WiBro) Networks

  • Hamid, Abdul;Hong, Choong-Seon
    • Proceedings of the Korea Information Processing Society Conference
    • /
    • 2007.05a
    • /
    • pp.1096-1097
    • /
    • 2007
  • We address the data confidentiality for wireless broadband (WiBro) networks. In WiBro, as the channel is wireless in nature, it suffers from passive and active attack. Passive attack, for example is to decrypt traffic based on statistical analysis and active attack is to modify traffic or inject new traffic from unauthorized mobile stations. Due to high mobility, frequent session key distribution is a bottleneck for the mobile stations. In aspect of WiBro, there is a communication between mobile station to base station, and also in mobile station to mobile station. It is expected to ensure data confidentiality while maintaining minimum overhead for the resource constrained mobile stations. In this paper, we proposed a security framework based on the concept of hyper-encryption to provide data confidentiality for wireless broadband networks.

Analysis of Multi-Current Distributed Broadband Printed Monopole Antenna (다중 전류 분포 광대역 평면형 모노폴 안테나 해석)

  • Jeon, Sung-Keun;Kim, Nam;Lee, Seung-Woo;Rhee, Seung-Yeup;Park, Ji-Chang
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.19 no.11
    • /
    • pp.1233-1239
    • /
    • 2008
  • In this paper we proposed a novel broadband printed monopole antenna for PCS/IMT-2000/WLAN terminals by widening current flow To compensate narrow bandwidth characteristics which is one of disadvantages of general printed monopole antenna, we add the patch of diamond shape and induce the current in various directions for acquiring broadband characteristics. And frequency characteristics is optimized with Various design parameters. The bandwidth of the realized antenna is $1.66{\sim}3.04\;GHz$(58.72 %) below the return loss of -10 dB which contain the required band-width of PCS/IMT-2000/WLAN band.

A Study of the Method for Subscriber-Aware and Fair Aggregation Scheme in Ethernet (이더넷에서 가입자 구별 및 공평한 접선에 관한 연구)

  • Kwon Tae-Hyun;Park Jong-Su;Park Dae-Geun;Lee Yong-Surk
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.7B
    • /
    • pp.602-607
    • /
    • 2006
  • A subscriber-oriented service became necessary for the QoS management due to the development of network. BcN(Broadband convergence Network) which incorporates communication, broadcasting and internet not only improves the quality of the communication and broadcasting service but also. aims at broadband service. Therefore, QoS management for each subscriber becomes more important. Not yet, however, the discussion for the subscriber oriented QoS management is not activated. Although, there are several techniques for subscriber distinction using flow information, IP information or MAC information, but they are only processed in layer 3 network. Actually, it is impossible to manage QoS of all subscriber's in layer 3 network. In this paper, we propose a method for QoS management scheme that does not need additional processes or large hardware in layer 2 network and analyze efficiency and overheads. We propose the first subscriber-oriented service method in layer 2 network that is applicable to either existing network or BcN.