• 전자공학회논문지D
• /
• 제35D권5호
• /
• pp.11-17
• /
• 1998

In this paper, the synthesis procedufe of impedance matching network is presented for broad-band microwave amplifier design, whereby amplifier operating in the octave bandwidth is designed and fabricated in detail. The transfer function of the matching netowrks is synthesized by chebyshev approximation and element values for the networks of specified topology are calculatd for various MILs and ripples. After the transistor is modeled by negative-image device model, the synthesis procedure for matching networks is applied to broad-band amplifier design which has electrical performance of about 12dB gain in 4 to 8GHz range. Experimental results obtained from the fabricated amplifier are shown to approach the electrical performance designed in the given frequency range. Construction of the impedance matching networks by transfer function synthesis is very useful method for the design of broad-band microwave amplifiers.

• 소음진동
• /
• 제6권6호
• /
• pp.749-754
• /
• 1996

In this paper, a design method of matching layers is presented for the sandwich type broad band underwater acoustic vibrators. The characteristic impedances of matching layers are determined to be matched to the characteristic impedance of head mass material. For the dynamic characteristic analysis of the sandwich type transducers, one dimensional FEM technique is also introduced. A test vibrator with the quarter wave matching layers has been designed to verify the proposed method. And the wide band characteristics of the input impedance and transmitting voltage response (TVR) are investigated.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.11-16
• /
• 1994

The impedance matching solution map is not a sufficient method for designing the broad-band absorber because of its difficulty to get numerical data about practical band-width. Therefore, we develope a new method to design the broad-band absorber. The complex permeability limits, which is necessary for designing the broad-band absorber in C-X band (4 GHz~12.4 GHz) were investigated and application was also examined. The complex permeability limits represent the frequency dependence of the complex permeability at a practical frequency band. These complex permeability limits can be used effectively to design broad-band single-layered absorber because they offer numerical data about the band-width in the case of various dielectric loss tangent, practical frequency bands and permitted reflection losses of an absorber.

• 제어로봇시스템학회논문지
• /
• 제19권9호
• /
• pp.755-759
• /
• 2013

A broad-band underwater acoustic transducer that uses thickness vibration mode, derived from a disk type piezoelectric ceramic, has been proposed and designed for DVL (Doppler Velocity Log). Three different types of acoustic transducer were evaluated with respect to the transmitting voltage response, receiving voltage sensitivity and bandwidth of the transducer. The effect of the acoustic impedance matching layer and backing layer is discussed. The results demonstrated that three matching layer with lossy backing layer is the best configuration for underwater transducer. The trial underwater acoustic transducer with three matching layer has a frequency bandwidth of 55%, maximum transmitting voltage response of 200 dB and a maximum receiving voltage sensitivity of -187.3 dB.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2286-2292
• /
• 2011

In this paper we present the design of Low Noise Amplifier(LNA), mixer and filter for RF front-end part of partial discharge monitoring system. The monitoring system of partial discharge in high voltage power machinery is used to prevent many kinds of industrial accidents, and is usually composed of three parts - sensor, RF front-end and digital microcontroller unit. In our study, LNA, mixer and filter are key components of the RF front-end. The LNA consists of common gate and common source-cascaded structure and uses the resistive feedback for broad band matching. A coupled line structure is utilized to implement the filter, of which size is reduced by the meander structure. The mixer is designed using dual gate structure for high isolation between RF and local oscillator signal.

• 한국항해학회지
• /
• 제10권1호
• /
• pp.29-40
• /
• 1986

Abroad-band design method of a lumped-element 3 dB quadrature hybrid without magnetic coupling is proposed and discussed, where techniques of cascading fundamental hybrids via second-order delay equializers and adding matching sections are adopted. It is shown that the designed broad-band lumped-element 3 dB quadrature hybrid can be easily constructed and its bandwidth reaches up to 54%. Furthermore, the experiments have been carried out, the results of which agree with the theoretical ones, and hence, the validity of the broad-band design method proposed here was confirmed.

• 한국통신학회논문지
• /
• 제10권6호
• /
• pp.317-326
• /
• 1985

신호의 $90^{\circ}$위상차 분배/합성이 가능한 Quadrature Hybrid는 Image Rejection Mixer등에 널리 쓰이고 있으며, 특히 VHF대 위성통신을 행할 경우에는 집중정수형으로 제작하는 것이 대단히 유리하다. 이 경우 자기결합을 갖게 되면 제작이 곤란하므로 자기결합을 갖지 않는 형식으로 광대역 특성을 갖는 소자를 설계하는 것은 대단히 중요하다. 본 연구에서는 자기결합을 갖지 않는 90Hybrid의 기본회로를 제안하고, 이 기본회로를 Phase Shifter를 이용하여 Cascade 로 연결하고 최적화함으로써 광대역화하는데 성공하였다. 여기서 설계한 Hybrid 는 약 54%의 대역폭을 가지며, Branch-Guide Type방향성 결합기에 비하여 훨씬 더 우수한 특성을 가짐을 입증하였다. 또한, 실험에 의하여 제안한 설계법의 타당성을 확인하였다.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.891-895
• /
• 2010

본 논문에서는 듀얼 밴드(UHF: 470-862 Mhz, L: 1452-1492 MHz) DVB-H 안테나를 제작하였다. 제안된 안테나는 입력 임피던스 매칭 회로를 이용한 평판형 역 F 안테나 (PIFA)로 구성되었다. 매칭 회로는 안테나의 UHF 대역(470-862 MHz: 63%) 성능을 향상시켰다. 제시된 안테나는 전방향적 특징을 보이고 PMP에 적용 가능한 충분한 이득(최대 이득이 470-860 MHz에서 1.70dBi)을 보인다. 안테나는 소형으로 제작 되었으며 크기를 줄이기 위해 유전체로써 사용되어진 PMP 케이스(${\varepsilon}_r\;=\;3.2$)에 부착되었다.

• 대한전자공학회논문지TC
• /
• 제47권3호
• /
• pp.50-56
• /
• 2010

본 논문에서는 알키메디안 스파이럴 슬롯을 이용한 소형화된 광대역 안테나가 제안되었다. 제안된 안테나는 광대역 특성을 갖는 CPW 급전 구조, 스파이럴 구조와 슬롯 구조를 이용하여 소형화된 안테나의 크기와 매우 넓은 대역폭을 갖는다. 알키메디안 슬롯의 폭과 간격, CPW 급전 구조에서의 급전선로와 접지면 사이의 폭은 좋은 임피던스 정합의 특성과 넓은 대역폭을 갖도록 하기 위해 최적화 하였다. 제안된 안테나의 크기는 $8mm\;{\times}\;13mm$이며 FR-4 (비유전율 : 4.4, 기판두께 : 0.8mm) 기판 위에 설계되어졌다. 모의 실험한 결과 제안된 안테나의 임피던스 대역폭 (VSWR $\leq$ 2)은 5.98GHz (4.1GHz ~ 10.08 GHz)이고 1.57 dBi ~ 3.97 dBi의 균일한 이득을 갖으며 이득은 8.7 GHz에서 3.97 dBi를 갖는다. 측정 결과 제작된 안테나의 임피던스 대역폭 (VSWR $\leq$ 2)은 6.02GHz (4.48 GHz ~ 10.5 GHz)이고 최 대 이득은 9.4GHz에서 2.68 dBi틀 갖는다. 제안된 광대역 안테나는 넓은 주파수 범위에서 임피던스 정합과 방사패턴올 유지하는 특성을 나타내므로 넓은 대역이 요구되는 무선 통신 시스템에 응용될 수 있을 것으로 사료된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.26-27
• /
• 2007