• 한국철도학회논문집
• /
• 제11권5호
• /
• pp.471-476
• /
• 2008

일반철도 및 고속철도를 포함한 철도교량의 상부구조로 현재 우리나라에서 주로 사용되고 있는 교량형식은 크게 박스 거더교와 I형 거더교로 구분된다. 박스 거더교는 동적 거동에 패한 안전성이 우수하기 때문에 주로 고속철도 교량으로 많이 사용된다. 1형 거더교는 일반철도 교량으로 주로 사용되며, 일반 PSC 거더교 형태와 철골 철근콘크리트로 합성화된 구조인 프리플렉스 거더교의 형태로 크게 구분되고 또한 새로운 형식도 지속적으로 개발 되고 있는 추세에 있다. 본 연구에서는 현행 철도교설계기준에 의거하여 각 형석별로 경간장에 따라 거더 설계를 실시하여 적절한 형고를 분석하며, 개략적인 교량가설 공사비를 산출하여 사용 경간장에 따른 구조적 효율성 및 경제성을 비교분석하였다. 이에 따른 비교분석을 수행한 결과, 구조적 효율성의 측면에서는 프리플렉스 거더교 형태의 교량이 경간장에 따른 형고는 가장 갖은 것으로 나타났으며, 가설 공사비의 측면에서는 일반 PSC 거더교 형태의 교량이 가장 경제적인 것으로 평가되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.83-85
• /
• 2004

We proposed the bridge type fault current limiter(FCL) using switching operation of high-Tc superconducting(HTSC) thin film. The proposed bridge type FCL consists of HTSC thin film, a diode bridge and a dc reactor. The controller for the operation of an interrupter is required in the conventional bridge type FCL to prevent the continuous increase of fault current after a fault happens. On the other hand, the proposed bridge type FCL can limit the fault current without the interrupter and the controller for its operation by the resistance generated when the gradually increased fault current exceeds HTSC thin film's critical current. We calculated the time when the gradually increased fault current started to be limited by the resistance generated in HTSC thin film after a fault happened and confirmed that it could be dependent on the amplitude of source voltage. The experimental results well agreed with the calculated ones from simulation.

• 전기학회논문지P
• /
• 제62권3호
• /
• pp.145-150
• /
• 2013

A novel AC to DC PWM converters with unity input power factor are proposed to overcome the above shortcoming. The main function of these converters is to shape the input line current to force it exactly in phase with the input AC voltage. Therefore, the input power factor can be improved to near unity and the input current harmonics can be eliminated. In this paper, half-bridge converter with two active switches and two diodes are utilized for low-cost type UPS configuration. By having only two semiconductors in the current path at any time, losses can be reduced over the conventional boost topology. Also, this converter provides controllable dc-link voltage, high power factor, and low cost type converter by simple power circuits. Simulation results show that the proposed half-bridge converter/inverter control technique can be applied to single-phase low-cost type UPS systems successfully.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 가을 학술발표회 논문집
• /
• pp.193-200
• /
• 1998

The precast prestressed concrete girders of I-type section are frequently employed to design the short-to-medium span bridge. However, its beam depth is greatly increased as its span length is increased over than about 30m. Therefore, the economic and aesthetic effectiveness are rapidly decreased in case of the span length over 30m. The purpose of this paper is to verify the structural safety on the new spliced two span bridge and analyze the variation of member forces and stress distribution according to the construction stages and time. The new spliced technique is performed by partial post tensioning and release in the U-type girders. The structural characteristics of this technique is the introduction of secondary moment to reduce the bending moment by self weight of precast U-type girders constructed in simply supported beam type. So, it is expected that the structural efficiency of this spliced bridge may be improved more than other techniques.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권6호
• /
• pp.100-109
• /
• 2011

최근 중앙경간 일부를 강박스 거더로 대체하여 자중을 감소시켜 중앙경간의 장경간화를 시도한 교량형식인 콘크리트-강 복합 엑스트라도즈드교는 기존 엑스트라도즈드 교량을 개선하기 위한 대안으로 제시되고 있다. 콘크리트-강 복합 엑스트라도즈드교는 자중 감소를 통해 중앙경간의 장경간화가 가능할 뿐 아니라 기존형식과 동일한 경우 주거더의 높이와 측경간을 감소시킬 수 있어 구조적 효율성이 매우 우수한 형식으로 평가되고 있다. 따라서 콘크리트-강 복합 엑스트라도즈드교에 대한 최적의 설계기법을 구축하는 것이 매우 중요하다. 이를 위하여 본 연구에서는 콘크리트-강 복합 엑스트라도즈드교에 대한 주요 설계변수(주탑 높이, 주거더 높이 및 강상판 거더 길이)를 도출하고, 이를 바탕으로 설계변수별 수치해석과 그 결과를 이용한 설계변수별 민감도 분석을 실시하여 설계변수가 교량의 설계에 미치는 영향을 정량적으로 반영할 수 있는 설계가중값을 도출하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.179-184
• /
• 2002

For the development of the practical design and analysis scheme of a bridge connecting to the typical VLFS, relevant design criteria and theory and techniques are studied and numerical analysis for the verification of the structural safety of the bridge are carried out. For the design of a typical steel bridge, characteristics of proper type bridge are reviewed and the requirements fur the bridge of this kind are studied as well as the environmental loads. By using the design spiral technique, several alternatives are investigated and an efficient type of a bridge is initially designed. Structural idealization is performed to make overall structural analysis first, and the structural behaviors of the proposed bridge in the given loading condition are evaluated. Through this study a bridge is finally proposed and it is found that this one works well for the connecting function of the bridge.

• Steel and Composite Structures
• /
• 제38권6호
• /
• pp.657-670
• /
• 2021

This paper presents a designing method for enhancing fire resistance of steel box bridge girders (closed steel box bridge girder supporting a thin concrete slab) through taking into account such parameters namely; fire severity, type of longitudinal stiffeners (I, L, and T shaped), and number of longitudinal stiffeners. A validated 3-D finite element model, developed through the computer program ANSYS, is utilized to go over the fire response of a typical steel box bridge girder using the transient thermo-structural analysis method. Results from the numerical analysis show that fire severity and type of longitudinal stiffeners welded on bottom flange have significant influence on fire resistance of steel box bridge girders. T shaped longitudinal stiffeners applied on bottom flange can highly prevent collapse of steel box bridge girders towards the end of fire exposure. Increase of longitudinal stiffeners on bottom flange and web can slightly enhance fire resistance of steel box bridge girders. Rate of deflection-based criterion can be reliable to evaluate fire resistance of steel box bridge girders in most fire exposure cases. Thus, T shaped longitudinal stiffeners on bottom flange incorporated into bridge fire-resistance design can significantly enhance fire resistance of steel box bridge girders.

• Structural Engineering and Mechanics
• /
• 제35권3호
• /
• pp.301-314
• /
• 2010

The paper presents the results and conclusions of dynamic load tests that were conducted on a road bridge over the Mokrzyca river in Wroclaw (Poland) made of galvanized corrugated steel plates (CSP). The critical speed magnitudes, velocity vibration, vibration frequency were determined in the paper. The dynamic analysis is extremely important, because such studies of soil-steel bridges in the range of dynamic loads are relatively seldom conducted. Conclusions drawn from the tests can be most helpful in the assessment of behaviour of this type of corrugated plate bridge with soil. In consideration of application of this type of structure in the case of small-to-medium span bridges, the conclusions from the research will not be yet generalized to all types of such solutions. The detailed reference to all type of such bridge structures would be requiring additional analysis (field tests and calculations) on the other types of soil-steel bridges.

• 콘크리트학회논문집
• /
• 제25권5호
• /
• pp.517-528
• /
• 2013

모듈러 기술은 자동차, 플랜트, 조선산업 분야에서 이미 오래전부터 적용해 오던 기술로, 최근 교량 분야에도 적용되고 있다. 모듈러교량은 부재별 세부설계 과정이 생략되고, 모듈별로 표준화 된다는 점에서 기존의 조립식교량과는 차별화 된다. 거더형식 프리캐스트 모듈러교량은 단순지지 교량 형식으로 개발되었으며, 다경간 교량에 적용할 경우 단순지지 교량 형식의 모듈러교량을 연속화하는 방법으로 적용할 수 있다. 거더형식 프리캐스트 모듈러교량의 연속화는 시공이 간편하고 급속시공에 적합한 연결슬래브를 적용하는 방법으로 이루어진다. 연결슬래브는 1950년부터 미국에서 RC 형식으로 사용되기 시작하였으며, 2000년대에는 ECC를 적용한 연결슬래브(ECC 연결슬래브)가 개발된 바 있다. 이 연구에서는 ECC에 비해 재연성이 좋고 경제적인 RC를 적용한 연결슬래브를 다경간 거더형식 프리캐스트 모듈러교량에 적용하였으며, 기존의 RC 형식 연결슬래브를 보완한 형태의 연결슬래브와 수정된 연결슬래브의 설계방법을 제안하였다. 제안된 연결슬래브 설계방법의 검증을 위하여 연결슬래브 바닥판 실험체를 제작하고 연결슬래브의 휨성능 및 균열 사용성 검증실험을 수행하였으며, 이후 실제 교량시스템을 모사한 실험체를 이용하여 200만회 피로성능 검증실험을 수행하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.137-152
• /
• 2016

This paper studied the dynamic response of a new gasbag-type floating bridge under the effect of a moving load. The arbitrary Lagrangian-Eulerian (ALE) method was used to simulate the movement of seawater and air, and the penalty-based method was used to study the coupling between gasbags and fluid. A three-dimensional finite element model of the floating bridge was established, and the numerical model was verified by comparing with the experimental results. In order to prevent resonance, the natural frequencies and flexural mode shapes were analyzed. Based on the initial state analysis, the dynamic responses of the floating bridge subjected to different moving loads were investigated. Vertical displacements and radial deformations of gasbags under different loads were compared, and principal stress distributions of gasbags were researched while driving. The hinge forces between adjacent modules were calculated to ensure the connection strength. Besides, the floating bridge under wave impacting was analyzed. Those results can provide references for the analysis and design of this new floating bridge.