• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.893-899
• /
• 2003

In this study, a realtime bridge scour monitoring system was installed and operated to measure the real scour depths in relatively hard and rocky bottom. And riverbed change at before and after flood was investigated by GPR(Ground Penetrating Radar) to check the rationality of measured values. As the result of this study, it was revealed the inaccuracy of equilibrium scour depth estimation through the bridge scout equations because most of the equations do not reflect the differences of geological characteristics, evaluated the real scour depths considering both bed and flow conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.517-524
• /
• 2004

The leading cause of bridge failures is scouring bed material from around bridge foundations. Many advanced countries such as U.S.A., U.K., the Netherlands and New Zealand have developed and revised their own bridge scour manuals fit for their field conditions. In Korea, researches for reducing bridge failures during floods have concentrated on analysis, laboratory test and countermeasure of bridge scour during the last ten years. however no comprehensive manual for evaluating bridge scour and for identifying the conditions of bridge foundations has been provided yet. In this study, a new bridge scour manual is developed for the accurate evaluation of bridge scour, which reflects domestic field conditions with various streambed materials. The SRICOS method and the Erodibility Index Method are suggested for fine-grained soils and weathered rocks, respectively. In addition, bridge scour analysis algorithms are developed for field engineers to estimate bridge scour depth and to evaluate the susceptibility of bridge scour with ease.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2019

The basic analysis of Soil and structural mechanics for the bridge substructure affected by the flow of water is sufficient in the construction of such bridges, but the stability of scour resulting from hydraulic phenomena is insufficient. In addition, it is not enough to estimate the scour depth of the bridge which reflects the watershed characteristics of the domestic river because it uses the formula for calculating the scour depth of the overseas piers in calculating the scour depth of the bridge. In this study, the application of the CSU (1993) formula, which is currently applied to the national river design criteria, was reviewed between the two formulas after calculating the scour after calculating the scour by applying another bridge deck scour calculation formula to take into account the uncertainty in the calculation of scour. In this study, in addition to the CSU (1993) formula, which is currently applied to Korean river design criteria, another scour depth calculation formula is applied to calculate uncertainty in scour depth calculation, was reviewed between the two formulas. The review confirmed that the SSE (%) showed a difference of at least 2.08%, up to 91.23%, and SSEn(%) at least 0.19%, up to 415.91%, when compared to the measured depth of the pier based on the hydraulic model experiment and the depth of the pier calculated with the nine scour depth formulas in use. In other words, it is confirmed that there are many differences between the scouring formulas of piers. The results of this study are expected to be used to estimate scour depth in future river design.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.3-46
• /
• 1999

A new method called SRICOS is proposed to predict the scour depth z versus time t around a cylindrical bridge pier of diameter D founded in clay. The steps involved are ; 1. taking samples at the bridge pier site, 2. testing them in an Erosion Function Apparatus called the EFA to obtain the scour rate z versus the hydraulic shear stress applied $\tau$, 3. predicting the maximum shear stress r max which will be induced around the pier by the water flowing at ν Ο before the scour hole starts to develop, 4. using the measured z versus r curve to obtain the initial scour rate zi corresponding to r max , 5. predicting the maximum depth of scour zmax for the pier, 6. using zi and zmarx to develop the hyperbolic function describing the scour depth z versus time t curve, and 7. reading the z vs. t curve at a time corresponding to the duration of the flood to find the scour depth which will develop around the pier. A new apparatus is developed to measure the z vs t curve of step 2, a series of advanced numerical simulations are performed to develop an equation for the $\tau$ max value of step 3, and a series of flume tests are performed to develop an equation for the zmax value of step 5. The method is evaluated by comparing predictions and measurements in 42 flume experiments.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.187-194
• /
• 2002

Bridge dynamic behaviors and the failure of the foundation are examined in this study under seismic excitations including the local scour effect. The simplified mechanical model, which can consider the effect of various influence elements, is proposed to simulate the bridge motions. The scour depths around the foundations are estimated by the CSU equation recommended by the HEC-18 and the local scour effect upon global bridge motions is then considered by applying various foundation stiffness based upon the reduced embedded depths. From the simulation results, it is found that seismic responses of a bridge with the same scour depth for both foundations increase due to the local scour effect. The bridge scour is found to be significant under weak and moderate seismic intensity. The recovery durations of the foundation stiffness after local scour are found to be critical in the estimation of the probability of foundation failure under earthquakes. Therefore, the safety of the whole bridge system should be conducted with the consideration of the scour effect upon the foundations and the recovery duration of stiffness should be determined rationally.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.349-356
• /
• 2021

Since the 1960s, traffic infrastructure, such as bridges, has increased rapidly in Korea as urbanization and industrialization progressed due to economic growth. As the scale of the bridge becomes larger, stability analysis of the superstructure of the bridge is being conducted actively, but scour stability analysis for the substructure of the bridge has not been conducted sufficiently. This study is a basic investigation to prevent large-scale disasters caused by scouring in bridge piers. A simple linear regression model was used to analyze the scour depth calculated through seventeen scour depth calculation formulae, and the scour depth measured through hydraulic model experiments. As a result, the Coleman (1971) formula was the best method among the scour depth calculation formulae, and the Froehlich (1987) formula was the most effective method for calculating the scour depth. In addition, a review using a simple regression model confirmed that the scour depth calculation formulae of CSU (1993), Coleman (1971), and Froehlich (1987) can predict a similar scour depth by reflecting domestic stream characteristics. This study can calculate the scour depth reflecting the environmental conditions of Korea in future stream design.

• Journal of Korea Water Resources Association
• /
• v.32 no.1
• /
• pp.49-59
• /
• 1999

In order to understand the present situation of bridge scouring and to provide the fundamental information for bridge design, in-situ measured data is analyzed for bridge scours at small and medium streams in the heartland of Korea. The physical parameters affecting the bridge scouring such as flow depth, velocity, pier length and width, scouring depth, and the angle between flow and pier are extensively surveyed and measured. According to the locality and the pier type data are classified to analyze. With these data, some important factors for the scour depth such as flow depth, angle and Froude number are investigated and applied to existing formulas proposed by many researchers. In addition, the computational results are compared with the measured and some of the applicable formulas in this region are recommended.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2B
• /
• pp.187-195
• /
• 2006

A bridge scour management system is developed to evaluate the vulnerability of bridge piers to scour and to help establish effective disaster measures, taking into account the locality and scour characteristics in Korea. This system is programmed using the techniques of the geographical information system(GIS) for the storage, retrieval, and display of information regarding to bridge scour. The system functions are basically divided into two parts; prioritization and maintenance. Bridges are initially screened and prioritized for bridge scour inspection and evaluation using the basic information which is obtained from the office review. The bridge scour evaluation including site investigation is performed and the vulnerability of bridge piers is categorized into six groups taking into account the local scour depth, foundation bearing capacity, foundation type, foundation depth, and present scour condition. The system tabulates and plots all the data and the results.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.429-433
• /
• 2004

According to researchers, the influential factors of scouring are generally divided into three factors: the flow conditions, the type and position of structures, and the characteristics of bed materials. In addition, scouring is affected by the 3-dimensional turbulent boundaries, the unsteady flow, the movement of sediment in the scour-hole area, the approach flow velocity and depth, the width of bridge foundation/pier, and the particle size of bed materials. However, it is difficult to estimate the scour depth near bridge piers when all conditions are factored in at once. Therefore, for reasonably accurate estimates of scour depth, it is essential to consider sufficiently the flow force and resisting force for scour. That is, to determine the shear stress concerning the bed material distribution is needed. In this study, the experiments were performed under the condition of a steady state of flow. As a result, scouring occurred at velocity ratios of 0.476,$(V/V_c=0.476)$, and the scour depth was increased linearly as the velocity ratio increased. in addition, the average values of shear stress ratio at zero scouring depth in both rectangular and circular piers were approximately 7$(\tau_c/\tau_{approach})$ and in the case for same size bed particle material. The results of this study can be used for the fundamental material for estimating the scour depth of bed materials.

• Structural Monitoring and Maintenance
• /
• v.6 no.2
• /
• pp.85-101
• /
• 2019

The effects of foundation scour depth and riverbed condition on the natural frequencies of a typical cross-river integral abutment bridge have been studied. The conventional operational modal analysis technique has been employed in order to extract the modal properties of the bridge and the results have been used in the Finite Element (FE) model updating procedure. Two tests have been carried out in two different levels of water and wet condition of the riverbed. In the first test, the riverbed was in dry condition for two subsequent years and the level of water was 10 meter lower than the natural riverbed. In the second test, the river was opened to water flow from the upstream dam and the level of water was 2 meter higher than the natural riverbed. The results of these two tests have also been used in order to find to what extend the presence of water flow in the river and saturation of the surrounding soil affect the bridge natural frequencies. Finally, the updated FE model of the bridge has been applied in a series of parametric analyses incorporating the effect of piles' relative scour depth on the bridge natural frequency of the first four vibration modes.