• Structural Engineering and Mechanics
• /
• v.19 no.3
• /
• pp.237-260
• /
• 2005

This paper presents an experimental as well as a numerical analysis of the in-plane shear behaviour of hollow, $870{\times}840{\times}100mm$ masonry walls, externally strengthened with FRP composites. The experimental approach is devoted to the evaluation of the effectiveness of different composite strengthening configurations and the methodology consists in the diagonal compression of masonry walls. The numerical study assesses the stress and strain state distribution in the unreinforced and strengthened panels using a commercial finite element code. The effect of FRP reinforcement on the masonry behaviour and the capability of modelling to forecast a representative failure mode of the unreinforced and reinforced masonry walls is investigated.

• Structural Engineering and Mechanics
• /
• v.5 no.2
• /
• pp.137-148
• /
• 1997

In computing eigenvalues for a large finite element system it has been observed that the eigenvalue extractors produce eigenvectors that are in some sense more accurate than their corresponding eigenvalues. From this observation the paper uses a patch type technique based on the eigenvector for one mesh quality to provide an eigenvalue error indicator. Tests show this indicator to be both accurate and reliable. This technique was first observed by Stephen and Steven for an error estimation for buckling and natural frequency of beams and two dimensional in-plane and out-of-plane structures. This paper produces and error indicator for the more difficult problem of three dimensional brick elements.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.196-202
• /
• 2009

Study from Yogyakarta earthquake reconstruction program, cast-in-place wall using fix-size formwork system (Old-CIP) has offered a good alternative for house construction. A simulation has also confirmed that this system using mortar as the main material can provide cheapest cost and lowest total man power compared to conventional wall construction technique: brick or mortar-block wall. This paper presents the new wall construction technique: full size cast-in-place wall (New-CIP). The detail of how this new technique implemented is described. In addition, considering that material and labor cost in one area is different to others, cost analysis for different resources prices and wages of three cities are taken into a simulation. The analysis is aimed to distinguish the implementation feasibility of New-CIP system compared to the four common wall systems. Finally, its implementation resistance is also discussed.

• Earthquakes and Structures
• /
• v.22 no.5
• /
• pp.475-485
• /
• 2022

This paper presents a comparative experimental study on structural behavior of the interlocking masonry walls under in-plane cyclic loading. The main purpose of this study is to increase lateral load-bearing capacities of masonry walls by using interlocking units. The interlocking units were designed by considering failure modes of masonry walls and produced using lightweight foamed concrete. To this end, three masonry walls which are hollow, fully grouted, and reinforced were constructed with interlocking units. Also, a traditional masonry brick wall was built for comparison reasons. The walls were tested under in-plane cyclic loading. Then, structural parameters of the walls such as lateral load bearing and total energy dissipation capacities, ductility, stiffness degradation as well as failure modes obtained from the tests were compared with each other. The results have shown that the walls with the interlocking units have better structural performance than traditional masonry brick walls and they may be used in the construction of low-rise masonry structures in rural areas to improve in-plane structural performance.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.207-208
• /
• 2023

Concrete bricks and hollow concrete block products manufactured using ordinary portland cement react with salt and carbon dioxide absorbed from the soil and atmosphere in the use environment, causing contamination such as efflorescence. This is due to the reaction between calcium hydroxide, a cement hydration product, and carbon dioxide, producing and eluting calcium carbonate. This study was a preliminary study to compare and evaluate the reduction of efflorescence in concrete bricks and hollow concrete block products manufactured using carbon dioxide reaction hardening cement. The purpose was to evaluate the efflorescence occurrence in products using ordinary Portland cement.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2007.10a
• /
• pp.255-256
• /
• 2007

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.156.1-156
• /
• 2002

• Journal of the Korean Institute of Educational Facilities
• /
• v.4 no.4
• /
• pp.89-100
• /
• 1997

• Korean Architects
• /
• s.627
• /
• pp.98-101
• /
• 2021

우리나라 건축용어 중에는 왜 그렇게 표현하는지 어원을 알 수 없는 것들이 많습니다. 이 연재에서는 필자가 이해하기 어려웠거나 호기심이 크게 생겼던 표현들을 소개하고, 그 어원과 출처를 추적할 것입니다. 이를 통해 독자들과 함께 보다 적절한 표현은 무엇일지 고민하는 계기를 갖고자 합니다.

• Journal of architectural history
• /
• v.14 no.2 s.42
• /
• pp.89-101
• /
• 2005

The bricks in Myung Dong Cathedral Church are now deteriorated by the weather such as temperature, humidity, and winds. Thus it is necessary to replace the old bricks to the restored bricks for the load bearing capacity as well as to prevent the penetrations of rains from outside. However the mortar composition is not well defined at this moment and there are literary about the mortar completions. Thus it is necessary to verify the mortar compactions between old bricks and results to bring the restoring the mortar for the replace of new bricks. The particles of mortar was collected from Myung Dong Cathedral Church and particle size was analyzed by the mortar and pestle and mechanicle floater. The X-ray diffraction and XRF of each particles are analyzed. The quartz and feldspar such as albite, kaolinite are observed in large particles(>1mm). However, the clicite was observed at lower than $43{\mu}m$ particles. In XRF analysis, the $SiO_2\;and\;K_2O$ are observed at large particles$(1mm-208{\mu}m)\;and\;CaCO_3$ is observed at small particles$(208-43{\mu}m)\;and\;CaCO_3$ is observed at small particles($208-43{\mu}m$). This is well coincide with XRD results. The optimum volume ratio of lime mortar would be 1: 2 ($CaO: SiO_2$).