• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.168-171
• /
• 2007

The stability of a typical rubble mound breakwater defenced by a submerged structure is investigated using hydraulic experiments. Incident irregular waves are obtained from the Bretschneider-Mistuyasu spectrum. Experiments are carried out for different spacings between two breakwaters (X/d=2-3) and for different relative widths (B/h=0.7-3.0) of the submerged structure. It is observed that a submerged structure of (B/h) of 0.7-3.0 constructed at a seaward distance (X/d) of 2-3 breaks all the incident waves and dissipates energy and breakwater.

• Journal of Ship and Ocean Technology
• /
• v.7 no.2
• /
• pp.20-28
• /
• 2003

A table of annual sea state occurrences is prepared based on the significant wave heights and modal periods, two parameters representing a Bretschneider wave spectrum. Measurements of them were done by the Korean Ocean Research and Development Institute (KORDI) at 67points around the Korean peninsula for 22 years. Also the average values of parameters over 4 regions and 4 seasons were derived. Comparative seakeeping calculations using wave parameters prevalent around Korea and those of the North Pacific at sea state numbers 3, 4, and 5 respectively, show some differences in the assessed seakeeping performance.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.3
• /
• pp.236-245
• /
• 1996

A wave prediction model is used to estimate the wave spectrum at Ulsan Bay. The Wave model includes the refraction of wave rays according to water depth changes in transient and shallow waters. The calculation of wave refraction is performed from three wave directions : east, southeast and south. Three target locations are selected and the wave spectrum at each location is computed for several uniform wind speeds and directions. The computation results of wave spectrum are compared with PNJ(Pierson, Newmann and James) nomogram and Bretschneider nomogram as well. The model could be used in selection of proper harbor site and in construction of coastal facilities, providing fundamental data in design.

• International Journal of Ocean System Engineering
• /
• v.2 no.4
• /
• pp.250-258
• /
• 2012

The distribution of wave heights is assumed to be a Rayleigh distribution, based on the assumption of a narrow band and Gaussian distribution of wave elevation. The present study was started with doubts about the narrow band assumption. We selected the wave spectra widely used to simulate irregular random waves. The wave spectra used in this study included the Pierson-Moskowitz spectrum, Bretschneider-Mitsuyasu spectrum, and JONSWAP spectrum. The directionality of the waves was considered. The cosine 2-l type directional spreading function and mixed form of the half-cosine 2-s type with Mitsuyasu type directional spreading are considered here to investigate the effects of a directional spreading function on random waves. The simulated wave height distribution is compared with a Rayleigh distribution.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3B
• /
• pp.315-324
• /
• 2010

We developed a design chart for very large floating structures through intensive hydroelastic analysis. Using this chart, one can predict the hydroelastic response of very large floating structures preliminarily at design stage without the cost-demanding hydroelastic analysis. This paper presents two new design charts based on the theory of VLFS. The purpose of the first design chart is to determine RAOs of the maximum longitudinal stress of VLFS considering properties of waves and structures. The design chart I can be applied to any sizes of VLFS in same aspect ratios and dimensionless stiffness parameters. The second design chart is developed to take into account the actual wave condition by using the Bretschneider spectrum with Beaufort sea state.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.19 no.1
• /
• pp.29-37
• /
• 2007

In this study, transmission and reflection of multi-directional random waves propagating over impermeable submerged breakwaters are calculated by using eigenfunction expansion method. A series of mutiderectional random waves is generated by using the Bretschneider-Mitsuyasu frequency and Mitsuyasu type directional spectrum. Strong reflection is occurred at the Bragg reflection condition of the peak frequency. If the row of breakwaters is fixed at 3 and the relative height of breakwater is fixed at 0.6, more than 25% of incident wave energy is reflected to offshore. It is also found that the reflection of directionally spreading random waves increases as the maximum spreading parameter $s_{max}$ increases.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.439-442
• /
• 2008

Diffraction of multi-directional random waves passing semi-infinite breakwater is investigated by using analytic solution derived by Penny and Prices(1952). An irregylarity of period and incident angle of waves and regular periods for regular waves are considered in addition by expanding from the past study which used only monochromatic wave in general. The Bretschneider-Mitsuyasu frequency spectrum and Mitsuyasu directional spectrum are used for incident waves. And diffraction of multi-directional random waves is reappeared by decomposing numerical results of several monochromatic waves which have variable period and incident angle. Analytic solution on the diffraction of regular waves and multi-directional random waves calculated in this study.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.2
• /
• pp.72-82
• /
• 1992

To accurately estimate nearshore current in shallow water regions. it is necessary to investigate the irregular wave transformation characteristics and radiation stress produced by random sea waves. This research is to investigate the application or the individual wave Analysis Method. the Component Wave Analysis Method and Representative Wave Analysis Method in the shallow water region. These methods were estimated by wave shallowing transformation when the waves propagate from deep water to shallow water region b)r generating regular waves, two component waves and irregular waves (Bretschneider-Mitsuyasu type). That is, the Indivisual Wave Analysis Method is to investigate from the viewpoint of shallow water transformation of wave statistical characteristics and their zero-down-crossing waves (wave height period and wave celerity). And the component Wave Analysis Method is to investigate from the view point of shallow water transformation of basic frequency component wave and their interference frequency component wave. In addition, this research is to compare the measured mean water level elevation with the calculated one from radiation stress of irreguar waves that is assumed in the three methods above.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.3074-3080
• /
• 2013

Amplification of wave height at concave corner was investigated by three dimensional hydraulic tests. A typical rubble mound structure was tested with two-layer Tetrapod and the slope of 1:1.5. The irregular waves with Bretschneider-Mitsuyasu spectrum were applied to the tests. The center angles of concave corner were 120 degree, 140 degree and 160 degree. According to the test results, the maximum wave height amplification ratio at concave corner was about 1.5 times of incident wave height among the all test conditions, and the W-shaped wave height distribution was shown.

• Journal of Korea Water Resources Association
• /
• v.45 no.12
• /
• pp.1275-1292
• /
• 2012

This study investigates the characteristics of stem waves along a vertical structure under overtopping conditions through laboratory experiments in a wave basin. The uni-directional random waves with Bretschneider-Mitsuyasu frequency spectrum as incident waves were used. This study is focused on the reduction of wave height due to the variation of relative freeboard height (R) and the results for wave overtopping conditions are compared with those for non-overtopping conditions. Though the relative wave height along a vertical structure decreases with the decrease of relative freeboard, the variation of stem width is not significant. For the relative freeboard is greater than 1, the reduction effect of stem wave height by overtopping can be ignored in this experiments. The reduction effect of wave height along the structure for R =0.5 is about 10% comparing with R =1.5.