• 한국해양공학회지
• /
• 제23권6호
• /
• pp.44-52
• /
• 2009

In this study, the behavior of a breasting dolphin with various dolphin heights and formations in the coastal area of Incheon was investigated. The dynamic deflection, shear stress, and moment of the pile were analyzed using the coefficient of the horizontal subgrade reaction that resulted from loading tests of different DWT (Dead Weight Tonnage). In the case of a vertical pile type dolphin, the deflection, shear stress, and moment increased as the dolphin height increased. In the case of the battered pile type dolphin, small values of shear stress and moment were shown at a low dolphin height, and the characteristics of the dynamic behavior of the dolphin showed that the deflection, shear stress, and moment increased as the pile slope of the dolphin decreased or the DWT increased.

• 대한토목학회논문집
• /
• 제29권3B호
• /
• pp.281-287
• /
• 2009

본 연구에서는 우리나라 인천 남구 시화호 연안의 퇴적토를 가토제(containment dyke)내에 펌핑 매립한 인천 LNG 인수기지 조성부지 내의 준설지반과 인근 시화호 조성공사 지역의 해성퇴적토에 대해 토질시험을 실시하여 토질정수를 산정하고, 돌핀 기초말뚝의 배열 조건을 달리하여 태풍 내습 시 돌핀에 작용하는 최대 파고에 의한 돌핀 기초말뚝의 변위, 전단력과 모멘트에 대한 거동 특성을 해석하였다. 수치해석 결과, 최대 심해설계파와 만내발생파의 파력에 의한 돌핀구조물의 거동은 일반적으로 준설토와 퇴적토의 지반반력계수 보다는 말뚝 직경의 크기에 더 큰 영향을 받는 것으로 나타나고 있다. 또한 돌핀구조물 기초말뚝을 직항으로 모델링한 경우와 경사말뚝을 조항으로 모델링한 경우, 조항이 직항보다 돌핀에 작용하는 외력에 대해 수십 배 이상의 저항효과가 있는 것으로 나타나고 있다.

• 한국항해항만학회지
• /
• 제37권6호
• /
• pp.647-653
• /
• 2013

Energy acquisition due to the increase of oil price is one of the most important issues and policy for most countries. Various tankers have been built in the world and sent to the trade market. It is necessary to build the port infrastructure and facilities to give them proper services such as mooring, packing, storing, and transshipment, etc. However, the domestic guidelines or standards for design and construction for the dolphin berth among these facilities are out of date and do not meet the recent trend of tanker types. Therefore, it requires amendment on the guidelines or standards. In this study, a detailed analysis of the tanker fleet, covering 8,000 ships under operation and order to build, is made to estimate the proper PBL(Parallel Body Length) of each tanker class. After discussion and comparison on the dolphin berth design and construction codes of various countries, those are the leading countries of tanker operation and management, suggestion was made to amend on the design code. The referred codes are of Korea, Japan, UK, USA, and Canada. The analysis of tanker fleet shows the PBL as 0.45L under the normal ballast condition. In order to verify the deduced amendment on the domestic design code for dolphin berth, it was selected one of the domestic dolphin berth, located at the Yeosu oil terminal, which is almost completed to construct. The design criteria and expected tankers to moor in that terminal were analyzed and the appropriateness and countermeasure for deficiency were summarized.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.253-258
• /
• 2000

Recently, the area of design optimization, especially structural optimization, has been and to be a continuous active area of research. And the design optimizations of port facilities have been achieved by many other civil engineers. But the design optimization of port facilities were limited to the design optimization of the breasting dolphin. This paper invested the design optimization of mooring pier and the foundations of mooring pier was suggested considering the convenience of repair and reinforcement work. The mooring pier devised with prestressed precast concrete panel and rigid frame welded wide flange beam to steel pipe pile. To accomplish the design optimization of mooring pier, the Augmented Lagrangian Multiplier Method(ALM) of ADS(Garret N. Vanderplaats) optimization routine, BFGS method as optimizer and Golden Section Method as one dimensional search were utilized. As a result, thirty percent of material cost for construction was reduced by design optimization. The tensile stress of concrete panel and bottom flage was critical constraints under service load. So, using high strength concrete and steel will be economical. And lots of initial values must be invested to accomplish the design optimization in design procedures.