• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.5
• /
• pp.691-699
• /
• 1997

The effects of concave hemispherical surface curvature on the local heat transfer from a turbulent round impinging jet were experimentally investigated. The liquid crystal transient method was used for these measurements. This method, which is a variation on the transient method, suddenly exposes a preheated wall to an impinging jet while video recording the response of liquid crystals for the measurement of the surface temperature. The Reynolds number ranges from Re=11,000 to 50,000, the nozzle-to- surface distance from L/d=2 to 10, and the surface curvature from D/d=6 to 12.The present results are also compared to those for the flat plate case. In the experiment, the local Nusselt numbers tend to increase in all regions with an increasing surface curvature. The maximum Nusselt number for all Reynolds numbers occurred at L/d .ident. 6 and a second maximum in the Nusselt number occurred at R/d .ident. 2 for both Re=23,000 and Re=50,000 in the case of L/d=2 and for Re=50,000 only in the case of L/d=4. Meanwhile, as the surface curvature increases, the value of the secondary maximum Nusselt number decreases. All the other cases exhibit monotonically decreasing values of the Nusselt number along the curved surface. The stagnation point Nusselt numbers are well correlated with Re, L/d, and D/d.

• Journal of ILASS-Korea
• /
• v.28 no.2
• /
• pp.75-88
• /
• 2023

In this paper, the atomization characteristics of bi-swirl coaxial injectors for a 420 N-class bipropellant thruster were investigated. Three types of injectors, namely closed-type, open-type, and screw-type, were manufactured and designed to have the same spray angle and injection pressure drop. Water was used as a simulant, and cold-flow tests were conducted under ambient temperature and pressure conditions. Since the inner and outer injectors were designed to be the same type, only the inner fuel injectors that were easy to measure were used. Using a phase doppler particle analyzer, the velocity and diameter of atomized droplets were measured. Closed-type swirl injector exhibited droplet distributions with relatively high velocities and small SMD compared to the other two injectors. Open-type swirl injector formed droplets with reverse velocities in the center region and had a large recirculation zone. Screw-type swirl injector showed a sharp decrease in droplet velocity and size with radial distance from the liquid film breakup point. For the same design requirements, the closed-type swirl injector has superior atomization performance.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.43-50
• /
• 2005

POS system that become that is supply net administration and computerization fetters of customer management that become point in istribution network constructed database and use XML-Encryption that is certificate techniques of PKI and standard of security for security that is XML's shortcoming and design distributed processing POS system using XML for data integration by introduction of Ubiquitous concept. This POS system has four advantages. First, Because there is no server, need not to attempt authentication and data transmission every time. Second, can integrate data base by XML and improve portability of program itself. Third, XML data in data transmission because transmit data after encryption data safe .Fourth, After encode whenever process data for data breakup anger of POS system client program and elevation of the processing speed, transmit at because gathering data at data transmission.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2022-2030
• /
• 2008

System such as FA and breakup TC is applied by real time and need to manage. This paper studies data processing skill that can divide TC and data of much quantity with collection by real time. Modularize to several system, and use of computer communication network that interlink computers that can achieve control function of each systems to network is spreading. Develop that can take advantage of Ideonet communication method and transmit signal of channel because do multiplex all. Do data that have semi-conductor equipment or many input of LCD equipment and output node multiplex, and several units real time Ideonet communication that control is available use that all input of point of contact and output module develop.

• Journal of Korean Theatre Studies Association
• /
• no.52
• /
• pp.229-270
• /
• 2014

Ostermeier's Hamlet has no particular contemporary reinterpretation. Alternately devoting to show retrospect in illusion and existence through revenging actions. However, Shakespeare's metaphorical and implicative language is dissipated and the style of the play is not an illusive space-time, but a tragic theatrical production that uses rough language to express the depth of the story. The Perfomance of Hamlet is a sensuous jumble up of a diverse range of mass media. The double roles that the actors carry out give an affect of isolation between the audience and the play itself showing both empathy and liberty. Ostermeier's Hamlet distinctively shows a post-modern performance through the prominent elements of dirt, the use of mixed genre, theatric emphasis, making an image and the fulfillment of acting. Nonetheless, Ostermeier's performance stays off the point on the breakup strategy of the post-modern drama without suspending the narrative of Shakespeare's Hamlet. Besides aiming to show a performance centered by the imagery of physical expression, his performance shows New Realism in the 1960's, showing everyday life. Ostermeier thinks, that theatre helps give contemporary people an accurate reality check in the constant unstable periods of time. Therefore, Hamlet shows post-modern physical expression and outspoken dramaturgy using the effects of mass media in New Realism without breaking up realistic narration. With being the aberration of the Castle Helsingor, the main character Hamlet, expresses lunacy and can be considered as metaphor for young adults whom are broken down and isolated from the economic system. He is a substitute for those who experience agony, anger, torment, etc. and other suppressed emotions in everyday life. With the method of direction in the portrayal of Hamlet show signs of succession in the abundant popularization of the classics by communicating with the audience by following the trend of modern mass media and audio-visual perception; emphasizing the point of the philosophical topic 'life and death,' 'life and theatre,' and 'illusion and reality.'

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.11
• /
• pp.1005-1013
• /
• 2010

This study was conducted to assess the spray control of flash boiling with mixed fuel in consideration of HCCI (Homogeneous Charge Compression Ignition) engine condition. Mixed fuel existing in two phase regions can control the process of mixture formation under low temperature and density by using the spray resulting from flash boiling which is able to induce rapid evaporation of fuel spray as well as the evaporation of high boiling point component. Because HCCI engine injects the fuel early under ambient conditions, it can facilitate the chemical control of ignition combustion and physical control such as breakup and atomization of liquid fuel by flash boiling of mixed fuel which consists of highly ignitable light oil and highly volatile gasoline. This study was conducted by performing video processing after selected composition and molar fraction of the mixed fuel as major parameters and photographed Schlieren image and Mie scattered light corresponding to the flash boiling phenomenon of the fuel spray that was injected inside a constant volume vessel. It was found that flash boiling causes significant changes in the spray structure under relatively low temperature and density. Thus, we analyzed that the flash boiling spray can be used for HCCI combustion by controlling the mixture formation at the early fuel injection timing.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1060-1067
• /
• 2007

We need various methods to develop MMORPG that is game genre which many users use among various game genre using Internet. Specially, to heighten efficiency of distributing work, Object-oriented language such as C++ is used and we need design techniques that can take advantage of enough object-oriented concept when making large-scale game. There is various pattern that can apply in software breakup design in GoF's design pattern for these design techniques. If you apply Observer pattern to Party System Design for forming community between game users, you can easily add new class and maintain system later. Party Play is one of the important system that is used to form game users' community in MMORPG games. The main point that must be considered in Party-Play-System is to divide evenly experience value and acquisition that is got by Party-Play among users according to each user's level. To implement Party Play System that consider maintenance of system, in this paper, we propose a method using GoF's Observer-Pattern, showing you that proposed method which has advantage to dynamic memory allocation and to virtual method call can be used usefully to change object to real time at program run and to add new class and to maintain system new.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.4
• /
• pp.266-274
• /
• 1999

Vertical CTDT measurement at one point near tidewater glacier of fjord-head in Marian Cove, a tributary embayment of Maxwell Bay, South Shetland Islands was performed for 24 hours during the austral summer (January 21-22, 1998) to present water-column properties and SPM (suspended particulate matter) dispersal pattern in subpolar glaciomarine setting. Marian Cove shows three distinct water layers: 1) cold, freshened, and highly turbid surface plume in the upper 2 m, 2) warm, saline, and relatively clean Maxwell Bay water between 15-35 m in water depth, and 3) cold and turbid mid plume between 40-65 m in water depth. The surface plume is composed of silt-sized clastie particles mixed with flocculated biogenic detritus, and appears to originate from either supraglacial discharge by meltwater streams along the coast or water fall of ice cliff. Freshened and turbid mid plume consists exclusively of silt-sized clastic particles, resulting from subglacial discharge beneath the tidewater glacier. The disappearance of the two turbid plumes during the earlier period of measurement seems to be largely due to the breakup of the plumes by upwelling caused by strong easterly wind (> 8 m $sec^{-1}$). Thus, wind coupling over tidal effects regionally plays a major role in dispersal pattern of SPM as well as water exchange in Marian Cove.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.205-237
• /
• 2014

Last 50 years there were a lot of space subjects launched by space activities of many states and these activities also had created tremendous, significant space debris contaminating the environment of outer space. The large number of space debris which are surrounding the earth have the serious possibilities of destroying a satellite or causing huge threat to the space vehicles. For example, Chinese anti-satellite missile test was conducted by China on January 11, 2007. As a consequence a Chinese weather satellite was destroyed by a kinetic kill vehicle traveling with a speed of 8 km/s in the opposite direction. Anti-satellite missile tests like this,contribute to the formation of enormous orbital space debris which can remain in orbit for many years and could interfere with future space activity (Kessler Syndrome). The test is the largest recorded creation of space debris in history with at least 2,317 pieces of trackable size (golf ball size and larger) and an estimated 150,000 debris particles and more. Several nations responded negatively to the test and highlighted the serious consequences of engaging in the militarization of space. The timing and occasion aroused the suspicion of its demonstration of anti-satellite (ASAT) capabilities following the Chinese test of an ASAT system in 2007 destroying a satellite but creating significant space debris. Therefore this breakup seemed to serve as a momentum of the UN Space Debris Mitigation Guidelines and the background of the EU initiatives for the International Code of Conduct for Outer Space Activities. The UN Space Debris Mitigation Guidelines thus adopted contain many technical elements that all the States involved in the outer space activities are expected to observe to produce least space debris from the moment of design of their launchers and satellites until the end of satellite life. Although the norms are on the voluntary basis which is normal in the current international space law environment where any attempt to formulate binding international rules has to face opposition and sometimes unnecessary screening from many corners of numerous countries. Nevertheless, because of common concerns of space-faring countries, the Guidelines could be adopted smoothly and are believed faithfully followed by most countries. It is a rare success story of international cooperation in the area of outer space. The EU has proposed an International Code of Conduct for Outer Space Activities as a transparency and confidence-building measure. It is designed to enhance the safety, security and sustainability of activities in outer space. The purpose of the Code to reduce the space debris, to allow exchange of the information on the space activities, and to protect the space objects through safety and security. Of the space issues, the space debris reduction and the space traffic management require some urgent attention. But the current legal instruments of the outer space do not have any binding rules to be applied thereto despite the incresing activities on the outer space. We need to start somewhere sometime soon before it's too late with the chaotic situation. In this article, with a view point of this problem, focused on the the Chinese test of an ASAT system in 2007 destroying a satellite but creating significant space debris and tried to analyse the issues of space debris reduction.