• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.23-29
• /
• 2020

Multilayer sub-contracting is a significant practice among the world, including Hong Kong. When a principal contractor secured a project from a developer, the specific jobs will usually be breaking down and sub-contractors with the lowest bid [1]. The adoption of multilayer sub-contracting has been a controversy issue which is considered as a two-side blade. While certain studies have been carried out to examine both the contributions, damages and improvements for multi-layer subcontracting, the construction industry and researchers are still waiting for a solid measure to enhance the system. Hence, this research attempts to study the advantages, disadvantages, conducts a comparison between single and multilayer sub-contracting and measures of current Hong Kong construction industry based on literature review, questionnaire and in-depth interviews. To achieve the objectives, Analytic Hierarchy Process (AHP) and total weighted score methods are adopted to examine and rank the criterion. The findings of this study provide a good basis for understanding the major reasons and problems caused by the adoption of multilayer sub-contracting. Besides, the identified safety perspective explores a new perspective regarding to issues of multi-layer subcontracting, which will serve as a solid foundation for further research to enhance safety performance. Finally, the findings of measurements towards improvement of multilayer sub-contracting will also provide a solidsolution for construction industry.

• Atmosphere
• /
• v.34 no.2
• /
• pp.153-176
• /
• 2024

At 0843 UTC 30 May 2021, a commercial aircraft encountered severe turbulence at z = 11.5 km associated with the rapid development of Mesoscale Convective System (MCS) in the Gyeonggi Bay of Korea. To investigate the generation mechanisms of Near-Cloud Turbulence (NCT) near the MCS, Weather Research and Forecasting model was used to reproduce key features at multiple-scales with four nested domains (the finest ∆x = 0.2 km) and 112 hybrid vertical layers. Simulated subgrid-scale turbulent kinetic energy (SGS TKE) was located in three different regions of the MCS. First, the simulated NCT with non-zero SGS TKE at z = 11.5 km at 0835 UTC was collocated with the reported NCT. Cloud-induced flow deformation and entrainment process on the downstream of the overshooting top triggered convective instability and subsequent SGS TKE. Second, at z = 16.5 km at 0820 UTC, the localized SGS TKE was found 4 km above the overshooting cloud top. It was attributed to breaking down of vertically propagating convectively-induced gravity wave at background critical level. Lastly, SGS TKE was simulated at z = 11.5 km at 0930 UTC during the dissipating stage of MCS. Upper-level anticyclonic outflow of MCS intensified the environmental westerlies, developing strong vertical wind shear on the northeastern quadrant of the dissipating MCS. Three different generation mechanisms suggest the avoidance guidance for the possible NCT events near the entire period of the MCS in the heavy air traffic area around Incheon International Airport in Korea.

• Journal of the Microelectronics and Packaging Society
• /
• v.31 no.2
• /
• pp.9-15
• /
• 2024

The effect of the residual impurity on the prepreg surface on the wettability of encapsulant for chip on board package was analyzed with microstructure, compositions and chemical bonds using a scanning electron microscope and X-ray photoelectron spectroscopy. As a result, the contact angle of w/ residual impurity sample was measured to be 28° higher than that of w/o residual impurity sample, and the C-O bond was decreased to be 4% lower than that of w/o residual impurity sample. The surface energy of the prepreg decreased because the impurity ions, Na and F, generated by the manufacturing process and wet etching, reacted chemically with the C on the prepreg surface, forming C-F bonds and breaking the C-O bonds on the prepreg surface. Therefore, the wettability of the encapsulant was degraded because the contact angle between the encapsulant and the prepreg was increased.

• Geomechanics and Engineering
• /
• v.38 no.3
• /
• pp.215-229
• /
• 2024

Because of the various patterns of deep-water inrush and complicated mechanisms, accurately predicting mine water inflows is always a difficult problem for coal mine geologists. In study presented in this paper, the water inrush channels were divided into four basic water diversion structures: aquifer, rock fracture zone, fracture zone and goaf. The fluid flow characteristics in each water-conducting structure were investigated by laboratory tests, and multistructure and multisystem coupling flow analysis models of different water-conducting structures were established to describe the entire water inrush process. Based on the research of the water inrush flow paths, the analysis model of different water inrush space structures was established and applied to the prediction of mine water inrush inflow. The results prove that the conduction sequence of different water-conducting structures and the changing rule of permeability caused by stress changes before and after the peak have important influences on the characteristics of mine water-gushing. Influenced by the differences in geological structure and combined with rock mass RQD and fault conductivity characteristics and other mine exploration data, the prediction of mine water inflow can be realized accurately. Taking the water transmitting path in the multistructure as the research object of water inrush, breaking through the limitation of traditional stratigraphic structure division, the prediction of water inflow and the estimation of potentially flooded area was realized, and water bursting intensity was predicted. It is of great significance in making reasonable emergency plans.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.115-120
• /
• 2000

All solid-state thin film micro-batteries consisting of lithium metal anode, an amorphous LiPON electrolyte and cathode of vanadium oxide have been fabricated and characterized, which were fabricated with cell structure of $Li/LiPON/V_2O_5Pt$. The effect of various oxygen partial pressure on the electrochemical properties of vanadium oxide thin films formed by d.c. reactive sputtering deposition were investigated. The vanadium oxide thin film with deposition condition of $20\%\;O_2/Ar$ ratio showed good cycling behavior. In in-siか process, the LiPON electrolyte was deposited on the $V_2O_5$ films without breaking vacuum by r.f. magnetron sputtering at room temperature. After deposition of the amorphous LiPON, the Li metal films were grown by a thermal evaporator in a dry room. The charge-discharge cycle measurements as a function of current density and voltage variation revealed that the $Li/LiPON/V_2O_5$ thin film had excellent rechargeable properly when current density was $7{\mu}A/cm^2$. and cut-off voltage was between 3.6 and 2.7V In practical experiment, a stopwatch ran on this $Li/LiPON/V_2O_5$ thin film micro-battery. This result means that thin film micro-battery fabricated by in-siか process is a promising for power source for electronic devices.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.224-230
• /
• 2001

The characteristics of $NO/N_2O$ annealed reoxidized nitrided oxide being studied as super thin gate oxide and gate dielectric layers of Non-Volatile Semiconductor Memory (NVSM) were investigated by Dynamic Secondary Ion Mass Spectrometry (D-SIMS), Time-of-Flight Secondary Ion Mass Spectrometry (ToF-SIMS), and Auger Electron Spectroscopy (AES). The specimen was annealed by $NO/N_2O$ after initial oxide process and then rcoxidized for nitrogen redistribution in nitrided oxide. Out-diffusion of incorporated nitrogen during the wet oxidation in reoxidation process took place more strongly than that of the dry oxidation. It seems to indicate that hydrogen plays a role in breaking the Si N bonds. As reoxidation proceeds, incorporated nitrogen of $NO/N_2O$ annealed nitrided oxide is obsen-ed to diffuse toward the surface and substrate at the same time. ToF-SIMS results show that SiON species are detected at the initialoxide interface, and Si,NO species near the new $Si_2NO$ interface that formed after reoxidation. These SiON and $Si_2NO$ species most likely to relate to the origin of the state of memory charge traps in reoxidized nitrided oxide, because nitrogen dangling bonds of SiON and silicon dangling bonds of $Si_2NO$ are contained defects associated with memory effect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.04a
• /
• pp.41-41
• /
• 2008

In general, polyimides (PIs) are used in alignment layers in liquid crystal displays (LCDs). The rubbing alignment technique has been widely used to align the LC molecules on the PI layer. Although this method is suitable for mass production of LCDs because of its simple process and high productivity, it has certain limitations. A rubbed PI surface includes debris left by the cloth, and the generation of electrostatic charges during the rubbing induces local defects, streaks, and a grating-like wavy surface due to nonuniform microgrooves that degrade the display resolution of computer displays and digital television. Additional washing and drying to remove the debris, and overwriting for multi-domain formation to improve the electro-optical characteristics such as the wide viewing angle, reduce the cost-effectiveness of the process. Therefore, an alternative to non-rubbing techniques without changing the LC alignment layer (i.e, PI) is proposed. The surface of LC alignment layers as a function of the ion beam (IE) energy was modified. Various pretilt angles were created on the IB-irradiated PI surfaces. After IB irradiation, the Ar ions did not change the morphology of the PI surface, indicating that the pretilt angle was not due to microgrooves. To verify the compositional behavior for the LC alignment, the chemical bonding states of the ill-irradiated PI surfaces were analyzed in detail by XPS. The chemical structure analysis showed that ability of LCs to align was due to the preferential orientation of the carbon network, which was caused by the breaking of C=O double bonds in the imide ring, parallel to the incident 18 direction. The potential of non-rubbing technology for fabricating display devices was further conformed by achieving the superior electro-optical characteristics, compared to rubbed PI.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.5
• /
• pp.141-162
• /
• 2017

The International Monetary Fund (IMF) crisis introduced a system for easy layoffs. With recent economic downturn, employees have been asked to retire early and less new jobs have become available. More small businesses as a result have been started. The purpose of this research is to study weight and ranking on SWOT factors of korea food service franchise industry using the SWOT analysis. The Analytic Hierarchy Process (AHP) and Analytic Network Process (ANP) were used to analyze the SWOT found by the surveys. First, the SWOT analysis shows that the franchise owners and the expert group view the industry positively overall and there are more strengths, opportunities than weaknesses, threats. While there are negatives and threats to the industry overall, many people think that there are more opportunities and positive aspects. Second, the franchise owners rank proven business model and platform (S3) as the strongest strength of food service franchise businesses while the expert group ranks management supports (S2) from headquarters as the strongest strength. Third, the expert group and franchise owner group indicate that the weight on unfair franchise contracts with headquarters(W3) and high penalty from breaking a franchise agreement(W4) are 60% of weaknesses. Fourth, both the expert group and franchise owner group indicate that change in people's lifestyle, value system and consumption pattern(O3) as the most important opportunity. Fifth, both groups indicate that changes in consumption pattern(T1) due to ever changing food service industry as the biggest threat. It is ranked higher than the entry of korea food service franchises.

• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.127-133
• /
• 2006

The major purpose of this paper to identify safety climate practices, and to find the affecting variables that influence to the difference in the level of safety climate between plants and employees. And this paper attempted to find the interventions for improving safety climate in the chemical plants. The questionnaires were developed from literature review, especially made by HSE(Health and Safety Executive) in the UK and distributed to managers and workers. The frequency analysis was applied for identifying the level of safety climate. The affecting variables(plant size, accident occurrence, accident experience, injury experience and severity, and length of employment) are tested through analysis of variance(ANOVA). The results of frequency analysis showed that both managers and workers recorded generally high level of safety climate, and the major underlying problems are inadequate H&S procedures/rules, pressure for production, and rule breaking. According to the outcomes of ANOVA, the variable 'length of employment' is the only variable which makes the level of safety climate different. From the survey of safety climate practice, this study finds the level of safety climate and three major underlying problems in safety climate factors of the responded plants, and presents two interventions for improving safety performance. Despite of these outcomes, the applied factors are remained questionable for reflecting as the best ones for identifying safety climate in the chemical industry. In addition, the bias caused by self-report exist in the reliability of the response, and the equivalent size of respondents.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.775-788
• /
• 2006

Many disaster monitoring systems are constantly studied to prevent disasters such as environmental pollution, the breaking of a tunnel and a building, flooding, storm earthquake according to the progress of wireless telecommunication, the miniaturization of terminal devices, and the spread of sensor network. A disaster monitoring system can extract information of a remote place, process sensor data with rules to recognize disaster situation, and provide work for preventing disaster. However existing monitoring systems are not enough to predict and prevent disaster, because they can only process current sensor data through utilizing simple aggregation function and operators. In this paper, we design and implement a disaster prevention system to predict near future dangerous area through using outside sensor network and spatial Information. The provided prediction technique considers the change of spatial information over time with current sensor data, and indicates the place that could be dangerous in near future. The system can recognize which place would be dangerous and prepare the disaster prevention. Therefore, damage of disaster and cost of recovery would be reduced. The provided disaster prevention system and prediction technique could be applied to various disaster prevention systems and be utilized for preventing disaster and reducing damages.