• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.53-56
• /
• 2007

Recently, waste concrete emission has been increased by acceleration of urban development and the rapid growth of redevelopment projects, so recycling of waste concrete is actively progressed, But the usage is limited to a lower value added such as the roadbed material etc. To produce the high quality recycled aggregate, breaking and washing process is added to the existing process and inevitably increases the occurrence of particle, because old mortal is included in the recycled aggregate. Therefore, this study purpose is analysis the properties of lightweight foamed concrete made by waste concrete sludge which is the by-product from produce the recycled aggregate. In result, possibility of manufacture of lightweight foamed concrete which gives equal performance compared with ALC was detect(scope of density : $0.5{\sim}0.6$, scope of compressive strength : $3.5{\sim}4.0MPa$). And scope of porosity is as follow ; total porosity : $27{\sim}30%$, open porosity : $1{\sim}5%$

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.41-49
• /
• 2005

This paper deals the effect of anthraquinone (AQ) on the contribution of sulphidity in kraft pulping of sapwood. The pulping conditions namely- active alkali concentration, pulpingtime, temperature and liquor ratio were varied in low ($15\%$) and high ($30\%$) sulphidity. $0.1\%$ AQ was added in the low and high sulphidity pulping with varying active alkali concentration and cooking time. At optimum conditions, low sulphidity kraft process produced about $44\%$ pulp yield with kappa number of about 23. But in high sulphidity kraft process kappa number was reduced to about 20 at the same yield. An addition of AQ reduced alkali requirement by $2\%$ on oven dried raw material and cooking time by 1 hour to produce pulp yield of about $44\%$ at kappa number 20. AQ is more effective in low sulphidity pulping than the high sulphidity pulping. The breaking length of kraft-AQ pulp was slightly higher than that of kraft pulp.

• Membrane and Water Treatment
• /
• v.6 no.4
• /
• pp.277-292
• /
• 2015

The extraction of lactic acid by an emulsion liquid membrane (ELM), in batch and continuous mode, has been reported. On the basis of preliminary experiments, the optimum composition of the organic phase (membrane) is determined. When the SPan 80 is used as surfactant, the emulsion breakage exceeds 50%, but only 10% is obtained when the ECA4360 is used. The effects of surfactant, carrier and solute concentrations, phase volume ratio, and stirring speed on the extraction yield were examined and optimized. Surfactant, carrier and diluent used were ECA4360, trilaurylamine (TLA) and dodecane, respectively; 2-ethylhexane-1,3-diol (EHD) is used as a co-surfactant. Under optimal conditions, emulsion breaking is very low and the swelling is kept at its lowest level. Under the pH conditions of fermentation medium, the extraction yield is lower. A mixer-settler continuous system was used for testing these conditions. The residence time, the number of extraction stages and the stability of the emulsion were studied and optimized. The extraction yield obtained exceeds 90%.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.9 no.4
• /
• pp.69-80
• /
• 2021

Purpose - This study investigated the development process of the Chinese distribution industry and analyzed the current status of China's offline and online distribution industries under the development process of the Chinese distribution industry. In addition, the current status of offline distributors in China and representative companies were analyzed as case studies. Research design, data, and methodology - This study analyzed the overall environment of the Chinese distribution industry by using literature data. Then, this study conducted a case analysis using RT Mart and Jingdong, major companies in the distribution industry. Result -The main research results of this study show that the Chinese distribution market has already matured, and retailers are fiercely competing to secure sales and operating profits through various methods such as finding new management methods, improving awareness and customer loyalty by expanding the number of stores. Conclusion -Recently, the characteristic of China's distribution industry is that the boundaries of distribution are breaking down. Chinese retailers are taking strategies to expand the scope of services by erasing the boundaries of distribution. In other words, distribution companies are promoting a borderless distribution strategy in which consumers purchase products online and offline without restrictions on time and space. In addition, small stores in residential areas are on the rise compared to large-scale stores in the city center. The existing distribution industry operates various types of distribution stores to prepare for the post-COVID-19 crisis.

• Design & Manufacturing
• /
• v.15 no.3
• /
• pp.13-18
• /
• 2021

In plate forming technology, cylindrical drawing process is widely used in industry due to technological development. In this study, we used stainless steel 3042B and stainless steel 304J1, which are the most commonly used materials in the production of cold and hot water tanks for water purifiers, among cylindrical drawing products. Under the same conditions, the thickness of the sidewall of the product formed by drawn experiment was studied. As a result of the experiment, the bottom thickness of stainless steel 304J1 was considered to be thick. It is judged that the defect rate can be reduced by changing the breaking phenomenon of the floor surface of the cold and hot water bottles to the material of stainless steel 304j1. Stainless steel 304 2B material shows a sharp change in thickness from punch corner R to sidewall position, while stainless steel 304J1 material showed a uniform change from punch corner R to sidewall position. Stainless steel 304J1 material is considered to improve the clamping of the product in the process of extracting the product after hand drawing. The appearance of stainless steel 3042B products is considered to produce more wrinkles in the flange, which exerts greater tensile force on the sidewall during molding, resulting in uneven sidewall thickness.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.3
• /
• pp.83-91
• /
• 2021

A crawler crane, which consists of a lattice boom, a driving system, and a movable vehicle, is widely used on construction sites. The crawler crane often traverses rough terrain at these sites; as a result, an overload limiter needs to be installed on the crane to prevent it from overturning and breaking. In this paper, we studied the distributed load change in relation to boom length and the angle of rotation of the roller that comes in direct contact with the grounded track shoe. First, we developed a 3D model of a crawler crane and meshed it for finite elements. Then, we performed finite element analysis to derive the load on the roller. Finally, we graphed and examined the roller distributed load data of the case according to boom length and rotation angle. By detecting the load on the roller of the crawler crane, we can predict the potential for the crane to overturn before it happens.

• International journal of advanced smart convergence
• /
• v.13 no.1
• /
• pp.114-121
• /
• 2024

Deleuze and Guattari introduced the concept of minority groups resisting the majorit. Minority groups consist of individuals who are excluded and marginalized by the majority. They advocate for a society in which these individuals, through mutual solidarity, can escape prejudice and fixed ideologies and lead a dignified human life. In this context, through his novels featuring protagonists with disabilities, Stéphane aimed to create an ideal societal atmosphere. The characters with disabilities in the novels incessantly strive toward life goals, emphasizing the importance of the process of effort and progress, even if the ultimate goals are not achieved. The dedicated pursuit of goals and the journey toward them hold significance beyond the attainment of objectives. Such an attitude and approach toward life by minority individuals is deemed sufficient to challenge the power structures established by the majority. This narrative challenges the societal norm and power structures, which highlights the value and meaning found in the process of striving and progressing, and ultimately contributes to breaking down societal barriers and fostering a more inclusive and equitable society.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.4
• /
• pp.678-686
• /
• 2009

The purpose of this study was to investigate changes in the cooking process of red beans used to prepare Bab (cooked rice) in cooking books published from late 19th century to the present. There are 3 different types of Bab that use red beans; Jungdeungbab, Patbab and Patsura, and cooking process vary between different cooking books. For making Jungdeungbab, one method is to cook the red beans in the water first, and then only the water, after draining the cooked red beans, is used to cook rice. The other method is to smash the cooked red beans and collect the water that passes through the smashed red beans to cook the rice. For Patbab, 2 cooking methods were found. One is to cook the whole red beans first and then to add them to the rice for cooking. Another method is to break the red beans into two pieces and mix them with rice and cook them together. Patsura is the red bean used to prepare the Bab offered to Kings during the Chosun dynasty(1392~1910). The cooking process of Patsura is similar to both Jundeungbab and Patbab. In Ijogungjeongyoritonggo(1957), the cooking method of Patsura is similar to that of Patbab; breaking red beans into two pieces and then mixing them with rice and cooking them together. Another method, which is similar to Jungdeungbab, is found in Ijogungjeongyoritonggo(1957) and Hangukyoribaekguasajeon(1976). In Ijogungjeongyoritonggo(1957), the cooking method is to cook the red beans first and then squeeze them after putting them into a sack and then using the extract to cook rice. In Hangukyoribaekguasajeon(1976), the red bean is prepared by first cooking red beans in water, and then only the water, after draining the cooked red bean, is used to cook rice. In further studies, the cooking procedures used in the previous period of the late 19th century should be examined.

• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.220-224
• /
• 2014

The tire tread is contacted with road surface directly. It gives significant effect on the breaking conditions, traction, noise and so on. The tread having grooves with complex geometry is molded by shaping process. The flow behavior of tread rubber in a mold affects the quality of the tread and it leads to the running performance of automobile. In this study, the flow behavior of rubber in shaping process has been investigated by computer simulation. The objective of flow simulation is the design of tread shape based on the contact of rubber on the mold surface and flow behavior of rubber. Different sequences of contact of rubber on the mold surface and flow behavior of rubber are observed according to the shape of tread on the mold surface. It was verified that the shape of tread gives significant effect on the flow behavior of rubber. Different flow behaviors of rubber and sequential contact of rubber to the mold surface were observed according to the shape of tread on the mold surface. Therefore, we have identified that the shape of tread give a change in the flow behavior of rubber.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.392-396
• /
• 2021

Expensive PCBN or ceramic cutting tools are used for processing of difficult-to-cut materials such as Ti and Ni alloy materials. These tools have the problem of breaking easily due to their high hardness but low fracture toughness. To solve these problems, cutting tools that form various coating layers are used in low-cost WC-Co hard material tools, and research on various tool materials is being conducted. In this study, binderless-WC, WC-6 wt%Co, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are densified using horizontal ball milled WC-Co, WC-Co-Mo₂C powders, and spark plasma sintering process (SPS process). Each SPSed Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are almost completely dense, with relative density of up to 99.5 % after the simultaneous application of pressure of 60 MPa and almost no significant change in grain size. The average grain sizes of WC for Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are about 0.37, 0.6, 0.54, and 0.43 ㎛, respectively. Mechanical properties, microstructure, and phase analysis of SPSed Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are investigated.