• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.1
• /
• pp.52-57
• /
• 2012

In this study, we investigated the possible use of a new inorganic material as alternative filler in the paper industry. The inorganic material is a mineral composed of calcium sulfate, that is generated when manufacturing phosphate fertilizer. The inorganic material was dehydrated by the thermal treatment to $200^{\circ}C$, $500^{\circ}C$, $700^{\circ}C$, and $900^{\circ}C$ to prepare white filler powders. Their basic properties, including color, particle shape, elements, and average particle size were identified. To determine the effect of new inorganic filler on paper's physical properties and strength, handsheets were prepared from HwBKP, SwBKP, and thermal treated inorganic fillers. Handsheets' ISO brightness, opacity, bulk, breaking length, and stiffness were measured. Results confirmed that thermal treated inorganic filler could be beneficial to the bulk and opacity of paper while maintaining higher level of breaking length and stiffness that is achieved using talc.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Macromolecular Research
• /
• v.17 no.6
• /
• pp.378-387
• /
• 2009

This research compared three methods for producing and processing nanocomposite polypropylene filament yarns with permanent antimicrobial efficiency. The three methods used to mix antimicrobial agents based on silver nano particles with PP were as follows: 1) mixing of PP powder and inorganic nanocomposite filler with the appropriate concentration using a twin-screw extruder and preparing granules, 2) method 1 with a singlerather than twin-screw extruder, and 3) producing the masterbatch by a twin-screw extruder and blending it with PP in the melt spinning process. All pure polypropylene samples and other combined samples had an acceptable spinnability at the spinning temperature of $240^{\circ}C$ and take-up speed of 2,000 m/min. After producing as-spun filament yarns by a pilot plant, melt spinning machine, the samples were drawn, textured and finally weft knitted. The physical and structural properties (e.g., linear density, tenacity, breaking elongation, initial modulus, rupture work, shrinkage and crystallinity) of the as-spun and drawn yarns with constant and variable draw ratios (the variable draw ratio was used to gain a constant breaking elongation of 50%) were investigated and compared, while DSC, SEM and FTIR techniques were used to characterize the samples. Finally, the antibacterial efficiency of the knitted samples was evaluated. The experimental results revealed that the crystallinity reduction of the as-spun yarn obtained from method 1 (5%) was more than that of method 2 (3%), while the crystallinity of the modified as-spun yarns obtained with method 3 remained unchanged compared to pure yarn. However, the drawing procedure compensated for this difference. By applying methods 2 and 3, the drawing generally improved the tenacity and modulus of the modified fibers, whereas method 1 degraded the constant draw ratio. Although the biostatic efficiency of the nanocomposite yarns was excellent with all three methods, the modified fabrics obtained from methods 1 and 2 showed a higher bioactivity.

• The Journal of the Korea Contents Association
• /
• v.16 no.12
• /
• pp.507-517
• /
• 2016

This study examines the types and characteristics of traumatic events middle-aged women experience and to explore the effects of attachment in the process of post-traumatic growth and forming a self-realization. 221 of participants were middle-aged women from the area of Seoul, Gyeong-Gi and the survey was composed of post-traumatic experience questionnaire, attachment scale, post-traumatic growth scale, self-realization scale. The type and characteristics of traumatic experience by middle-aged women were executed by frequency analysis and correlation with the structural equation model validation was used in order to analyze the relationship between each variable. the major findings are First, the loss of someone close(such as death, breaking up, divorce, breaking off) was reported as something general yet the biggest crisis event, Second, looking at the relationship between attachment, post-traumatic growth and self-realization, the secure parental attachment and spiritual transformation showed the correlation in all subregions except the subvariables of humanity and self-acceptance and Third, the results of Structural Equation Modeling shows that attachment has a static effect on post-traumatic growth and self-realization, and post-traumatic growth appeared to be the mediating factor of attachment and self-realization.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.343-351
• /
• 2018

Brazilian disc test is one of the most widely used experiments in the literature of geo-mechanics. In this work, the pre-holed concrete Brazilian disc specimens are numerically modelled by a two-dimensional discrete element approach. The cracks initiations, propagations and coalescences in the numerically simulated Brazilian discs (each containing a single cylindrical hole and or multiple holes) are studied. The pre-holed Brazilian discs are numerically tested under Brazilian test conditions. The single-holed Brazilian discs with different ratios of the diameter of the holes to that of the disc radius are modelled first. The breakage load in the ring type disc specimens containing an internal hole with varying diameters is measured and the crack propagation mechanism around the wall of the ring is investigated. The crack propagation and coalescence mechanisms are also studied for the case of multi-holes' concrete Brazilian discs. The numerical and experimental results show that the breaking mechanism of the pre-holed disc specimens is mainly due to the initiation of the radially induced tensile cracks which are growth from the surface of the central hole. Radially cracks propagated toward the direction of diametrical loading. It has been observed that for the case of disc specimens with multiple holes under diametrical compressive loading, the breaking process of the modelled specimens may occur due to the simultaneous cracks propagation and cracks coalescence phenomena. These results also show that as the hole diameter and the number of the holes increases both the failure stress and the crack initiation stress decreases. The experimental results already exist in the literature are quit agree with the proposed numerical simulation results which validates this simulation procedure.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.55-62
• /
• 2019

In this paper, we introduce a case of a fire accident during parking of a large truck that is repeatedly occurring. The shape and location of the combustion and electrical singularity commonly found in other vehicle fire accidents could limit the starter motor as the ignition section. In addition, it was possible to confirm the electrical melting singularity that could act as a cause of ignition between the start motor B terminal and the start motor enclosure. By combining the above investigations and investigations, it was possible to estimate the electric fire expressed from insulation breaking of the starter motor B terminal, and by using the renewable starter motor comparison product mounted on the fire vehicle, an experiment was performed to reproduce the ignition process from the starter motor under specific conditions. So. It is hoped that this will raise awareness about vehicle fires, which can lead to large fires or casualties, share the risks of using starter motors for regeneration, and help in the rapid and accurate investigation of similar vehicle fires in the future.

• Smart Structures and Systems
• /
• v.22 no.6
• /
• pp.675-687
• /
• 2018

In the previous studies on the porous rock strength the effect of pore number and its diameter is not explicitly defined. In this paper crack initiation, propagation and coalescence in Brazilian model disc containing a single cylindrical hole and or multiple holes have been studied numerically using PFC3D. In model with internal hole, the ratio of hole diameter to model diameter was varied between 0.03, 0.17, 0.25, 0.33, and 0.42. In model with multiple hole number of holes was different in various model, i.e., one hole, two holes, three holes, four holes, five holes, six holes, seven holes, eight holes and nine holes. Diameter of these holes was 5 mm, 10 mm and 12 mm. The pre-holed Brazilian discs are numerically tested under Brazilian test. The breakage load in the ring type disc specimens containing an internal hole with varying diameters is measured. The mechanism of cracks propagation in the wall of the ring type specimens is also studied. In the case of multi-hole Brazilian disc, the cracks propagation and b cracks coalescence are also investigated. The results shows that breaking of the pre-holed disc specimens is due to the propagation of radially induced tensile cracks initiated from the surface of the central hole and propagating toward the direction of diametrical loading. In the case of disc specimens with multiple holes, the cracks propagation and cracks coalescence may occur simultaneously in the breaking process of model under diametrical compressive loading. Finally the results shows that the failure stress and crack initiation stress decreases by increasing the hole diameter. Also, the failure stress decreases by increasing the number of hole which mobilized in failure. The results of these simulations were comprised with other experimental and numerical test results. It has been shown that the numerical and experimental results are in good agreement with each other.

• The Journal of the Korea Contents Association
• /
• v.21 no.7
• /
• pp.20-29
• /
• 2021

With the creation of a multi-platform media environment, contents production flows through convergence are being detected in the broadcasting contents sector, breaking the boundary between each other and breaking away from the rigid atmosphere of the past, when broadcasters were strictly divided or careful to comment on other programs. It is also quite encouraging that the method of collaboration has been done horizontally as a win-win strategy of co-existence and co-existence, not vertically based on one side's recognition or program popularity. Thus, this study noted the establishment of a world view to capture transmedia phenomena that transcend boundaries between each other to adapt and survive the rapidly reshaping media ecosystem at the base of this trend and to maintain the type of convergence and unrivaled value that emerges in various forms in the process. The research targets were selected for 'Usanseul' and 'Pengsoo', which are prominent in these movements and produce significant results at this point, and analyzed and compared to the results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.13 no.3
• /
• pp.2349-2371
• /
• 1971

1. The historical development of the agriculture in Korea is observed and the future of Korean agriculture is suggested with present situation in order to recommend a direction of policy in agricultural mechanization. 2. A factor analysis of agricultural mechanization The needs of agricultural mechanization in the view of both national need and the armer's desire under the present situation are analyzed with data from the various sources. The researcher found that the agricultural mechanization is badly needed to develop prospective Korean agriculture to future. 3. The direction of agricultural mechanization. It can be said that the position of agriculture in the national economy plays a very important role. This importance should not be ignored by the Politicians in their process of developing long range economy plan. The agricultural mechanization for the modernized Korean agriculture should be directed to increase the most effective results with minimize the least sacrifice. The merry tiller is recommended to the main agricultural machinery in Korea in order to meet its small farming operation un-its(or farm size). Tractor is recommended in the plain area for the crop cultivation. The cooperative cultivation for rice and the upland crops will be developed in the plain area. Tractor, therefore, is recommended for the main agricultural machinery in these areas. Either tractor or merry tiller is recommended to the orchard area by its operating size of the orchard. The researcher also disoussed about the development of animal husbandry on the farm with increasing the farm size in order to develop meadow and pasture nuder the consideration of both the improvement of food consumption and the comprehensive development of national resources. 4. Relationship between the Performance of various agricultural machinery and the economic scale. Because of the agricultural machinery needs an expensive fixed expense(fixed cost) the total expense Per ha of the fixed expense and the operation expense should less than the traditional expense Per Dan Bo with in creased corpgiclds Per Dan Bo. Since the anual fixed expense of the agricultural machinery is figured out by the durability the more the farm size the less fixed expense of machinery is required. The formula of this principle is as follows; fixed expense for Dan Bo=Fixed expense of agricultural machinery farm size(or farming scale) The breaking-even point is the balance point between the expense of the using agricultural machinery and the traditional farming expenses. Labor cost of the Dan Bo is increasing when the management scale increases by the tradititional farming while the machanized management decrease the management cost Per Dan Bo. The reseracher found that the distribution of agricultural machinery will be the adeventeous after the year of 1981 by the result of frguring out the breaking-even point. 5. The Investigate and the conclusion. The purpose of this study is found out the direction of agricultural machanization and the breaking-even point of various agricultural machinery, there for is found out effective of the using various agricultural machinery for Collection cutter, Binder, Footing thresser, Semi-power thresser, Power thresser, Combine, Power rice-Trans-Planter, etc.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.102-109
• /
• 1986

To know the ecological pattern of bulrush (Scirpus juncoides) seeds in dormancy-breaking responses as affected by different ripening processes, storage conditions, germination conditions, and some of known chemicals concerned, the study was conducted. Among other conditions detected, the burial in 2 cm depth paddy soil, $5^{\circ}C$ storage temperature, pre-maturing process (Green color), high concentration of chemicals used, and flooding paddy surfaces were the most efficient conditions for bulrush seeds to break dormancy and germinate, respectively.