• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.386-392
• /
• 2015

The purpose of this study was to evaluate the quality characteristics and antioxidant activities of noodles added with Rehmanniae Radix Preparata powder (RP). Wheat flour noodles were prepared with four levels of RP (0, 2.5, 5, and 7.5%). Moisture absorption of RP added noodles was somewhat greater than that of control. The turbidity of RP noodles decreased according to addition of RP. Hunter L (lightness) and b (yellowness) values of RP added noodles decreased according to addition of RP amount. Textural properties (measured by a texture analyzer), hardness, and springiness of RP noodles up to 5% were not significantly different from those of control. Antioxidant activity of RP added noodles increased according to addition of RP: $IC_{50}$ values of DPPH radical scavenging activity for raw noodles was 3.77 mg/g, whereas values of raw noodles with RP 2.5 and 7.5% were 3.69 mg/g and 2.47 mg/g, respectively. Polyphenol content increased according to addition of RP. Amylogram showed that RP addition increased initial gelatinization temperature, decreased breakdown, and reduced setback and consistency, which indicates protection against retrogradation. The sensory preference test revealed that cooked noodles with added 2.5% RP showed the highest scores for color, odor, taste, and overall preference. It is suggested that RP up to 2.5% could be substituted for wheat flour to improve noodle quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.2
• /
• pp.287-293
• /
• 2010

Regarding the physical properties of wheat flour added with lily's root powder, elasticity in farinograms tended to increase as the ratio of added lily's root powder increased. However, viscoelasticity, absorptivity, absorption time, and stability tended to decrease after an initial increase when a certain ratio of lily's root powder was added to the wheat flour. Results from the rapid viscosity analyzer (RVA) indicated that the retention strength, final viscosity, break down, set back value, $P_{max}$ value of the alveogram, and falling number value decreased. As for gaseous release, measured with a rheofermentometer, the total amount of $CO_2$ gas generated and retained tended to decrease. As for the gelatinizing properties in terms of differences in the granularity and the amount of lily's root powder (bulbs) added to wheat flour, the initial gelatinization temperature had no effect regardless of the type or amount of general grinding and minute (ultra-fine, $10\;{\mu}m$) lily's root powder. Meanwhile, the peak viscosity and peak viscosity time exhibited significant differences in 3, 5% general grinding lily's root powder additive groups. On the other hand, there was no significant difference between 3, 5% minute lily's root powder additive groups. This is likely because the activity of the enzyme in wheat flour decreased relatively and differences in the lily's root powder granularity resulted in a variation in water absorptivity. In the preference test, flavor retention of the functional bread increased according to the granularity of lily's root powder and the ratio of added lily's root powder, thus resulting in significant differences in the mouth feel and flavor; the texture and crumb color, however, did not exhibit significant differences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.157-163
• /
• 2016

BIM is currently applied in some domestic construction firms, but it is not being actively utilized due to changes in working environments and qualms about new studies. In order to utilize a BIM model in the design phase, process information is needed during construction, but the input system and utilization method of the process information's state are not complete. Therefore, we propose a BIM template for construction progress management that can show basic BIM information as the construction progresses in an easy and convenient way. This method will facilitate the adoption of BIM and enhance the productivity of construction companies. To this end, we designed a progress explorer for step-by-step progress and work schedules, and we generated three-dimensional views and a progress list by applying unit information (primary units, part units, and detail units) of the work breakdown structure (WBS) to the parameters. To use the BIM template, work progress information is input to the BIM modeling objects through Dynamo. We also used Dynamo for quick and easy calculation of the quantity of materials needed for construction work. To test the BIM template, we applied it to an actual project and evaluated its visibility and a progress list. The results showed that the proposed BIM template facilitates progress management of a project and can thus facilitate the adoption of BIM and improve the productivity of construction companies.

• Tribology and Lubricants
• /
• v.11 no.5
• /
• pp.128-135
• /
• 1995

Atomic force microscopy/friction force microscopy (AFM/FFM) techniques are increasingly used for tribological studies of engineering surfaces at scales, ranging from atomic and molecular to microscales. These techniques have been used to study surface roughness, adhesion, friction, scratching/wear, indentation, detection of material transfer, and boundary lubrication and for nanofabrication/nanomachining purposes. Micro/nanotribological studies of single-crystal silicon, natural diamond, magnetic media (magnetic tapes and disks) and magnetic heads have been conducted. Commonly measured roughness parameters are found to be scale dependent, requiring the need of scale-independent fractal parameters to characterize surface roughness. Measurements of atomic-scale friction of a freshly-cleaved highly-oriented pyrolytic graphite exhibited the same periodicity as that of corresponding topography. However, the peaks in friction and those in corresponding topography were displaced relative to each other. Variations in atomic-scale friction and the observed displacement has been explained by the variations in interatomic forces in the normal and lateral directions. Local variation in microscale friction is found to correspond to the local slope suggesting that a ratchet mechanism is responsible for this variation. Directionality in the friction is observed on both micro- and macro scales which results from the surface preparation and anisotropy in surface roughness. Microscale friction is generally found to be smaller than the macrofriction as there is less ploughing contribution in microscale measurements. Microscale friction is load dependent and friction values increase with an increase in the normal load approaching to the macrofriction at contact stresses higher than the hardness of the softer material. Wear rate for single-crystal silicon is approximately constant for various loads and test durations. However, for magnetic disks with a multilayered thin-film structure, the wear of the diamond like carbon overcoat is catastrophic. Breakdown of thin films can be detected with AFM. Evolution of the wear has also been studied using AFM. Wear is found to be initiated at nono scratches. AFM has been modified to obtain load-displacement curves and for nanoindentation hardness measurements with depth of indentation as low as 1 mm. Scratching and indentation on nanoscales are the powerful ways to screen for adhesion and resistance to deformation of ultrathin fdms. Detection of material transfer on a nanoscale is possible with AFM. Boundary lubrication studies and measurement of lubricant-film thichness with a lateral resolution on a nanoscale have been conducted using AFM. Self-assembled monolyers and chemically-bonded lubricant films with a mobile fraction are superior in wear resistance. Finally, AFM has also shown to be useful for nanofabrication/nanomachining. Friction and wear on micro-and nanoscales have been found to be generally smaller compared to that at macroscales. Therefore, micro/nanotribological studies may help def'me the regimes for ultra-low friction and near zero wear.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.91-98
• /
• 2017

The present paper is a study on the tracking characteristics depending on accelerated degradation of PVC insulation material. In order to insulation degradation of PVC insulation material, the Arrhenius equation, a type of accelerated degradation test formula, was used to conduct accelerated degradation experiments with experiment samples prepared at the following age equivalents: 0, 10, 20, 30 and 40 years. Afterwards, a tracking experiment was conducted on the accelerated experiment samples as part of the KS C IEC 60112 criteria. When measuring the PVC tracking features according to the accelerated aging, the results showed that when 0.1% of ammonium chloride was added to the PVC insulating material, but no tracking occurred. However, depending on the age equivalent, The results of analyzing the current waveform and voltage waveform of the tracking propagation process showed the age equivalent from 0 years to 40 years displayed a break down in insulation resistance and even the BDB(before dielectric breakdown) sections did not maintain the same functionality of the original material. Based on a criterion of an age equivalent of 0 years, material with an age equivalent of 10 years posed a 1.4 times greater risk, material with an age equivalent of 20 years posed a 2 times greater risk, material with an age equivalent of 30 years posed a 4.6 times greater risk, and material with an age equivalent of 40 years posed a 7 times greater risk.

• Korean Journal of Materials Research
• /
• v.22 no.8
• /
• pp.439-444
• /
• 2012

To compare the photocatalytic performances of titania for purification of waste water according to applied voltages and doping, $TiO_2$ films were prepared in a 1.0 M $H_2SO_4$ solution containing $NH_4F$ at different anodic voltages. Chemical bonding states of F-N-codoped $TiO_2$ were analyzed using surface X-ray photoelectron spectroscopy (XPS). The photocatalytic activity of the co-doped $TiO_2$ films was analyzed by the degradation of aniline blue solution. Nanotubes were formed with thicknesses of 200-300 nm for the films anodized at 30 V, but porous morphology was generated with pores of 1-2 ${\mu}m$ for the $TiO_2$ anodized at 180 V. The phenomenon of spark discharge was initiated at about 98 V due to the breakdown of the oxide films in both solutions. XPS analysis revealed the spectra of F1s at 684.3 eV and N1s at 399.8 eV for the $TiO_2$ anodized in the $H_2SO_4-NH_4F$ solution at 180 V, suggesting the incorporation of F and N species during anodization. Dye removal rates for the pure $TiO_2$ anodized at 30 V and 180 V were found to be 14.0% and 38.9%, respectively, in the photocatalytic degradation test of the aniline blue solution for 200 min irradiation; the rates for the F-N-codoped $TiO_2$ anodized at 30 V and 180 V were found to be 21.2% and 65.6%, respectively. From the results of diffuse reflectance absorption spectroscopy (DRS), it was found that the absorption edge of the F-N-codoped $TiO_2$ films shifted toward the visible light region up to 412 nm, indicating that the photocatalytic activity of $TiO_2$ is improved by appropriate doping of F and N by the addition of $NH_4F$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.5
• /
• pp.497-502
• /
• 1997

A seed pelleting technique was developed for easy handling of small sesame seeds (Chinbaeckkae) and for direct seeding in field. The mixture of pelleting material, binder(sodium alginate) and seeds were dropped in 100mM CaCl$_2$ solution. Charcoal was appeared as a best material among all to make pellets with the characters of hardness, breakdown, destruction rate and germination percentage. Zeolite formed the hardest pellet seeds among the materials and 1~3 seeds contained in a pellet on the treatment of 87g of sesame seeds mixed in 1$\ell$ CaCl$_2$ solution was estimated optimum rate of seed mixure with few appearance of seedless pellet. The moisture absorption rate was greater in the order of peat＋charcoal > peat > charcoal > zeolite. Germination percentage of pelleted seeds with charcoal was the best and similar to that of common non-treated seeds. Germination percentage of pelleted seeds by sowing depth of exposing a quarter of pellet seeds on the surface of vermiculite germination test box and were 92％ in charcoal treatment and was the best among all released materials.

• Development and Reproduction
• /
• v.3 no.1
• /
• pp.29-38
• /
• 1999

The pathogenesis of endometriosis is unknown, but retrograde menstruation is widely accepted as an etiology. Refluxed endometrium from endometriosis patients is more prone to implant and invade peritoneum possibly through the action of extracellular proteolysis. This proteolytic action may involve plasminogen activators and the collagenase system. Plasminogen activators (PAs) and matrix metalloproteinases (MMPs) play a critical role in the breakdown of extracellular matrix components and basement membrane in the processes of implantation and tumor invasion. PAs are inhibited by plasminogen activator inhibitor (PAI) and MMPs activity is inhibited by tissue inhibitor of metalloproteinase (TIMP). To test the hypothesis that lower expression of PAI-1 and TIMP-3 in endometrium from women with endometriosis, we investigated their PAI-1 and TIMP-3 expression by quantitative competitive RT PCR in endometrium from women with and without endometriosis. Endometrial tissues were obtained from 14 patients with severe endometriosis and 14 patients without endometriosis. Total RNA was extracted and reverse transcribed into cDNA, and quantitative competitive PCR (QC PCR) was performed to evaluate PAI-1 and TIMP-3 mRNA expression. Endometrium from patients with endometriosis showed decreased expression of PAI-1 and TIMP-3 mRNA compared to endometrium from control in luteal phase (p<0.05). Our results suggest that endometrium from women with endometriosis expresses lower levels of PAI-1 and TIMP-3 than endometrium from normal women. Endometrium from endometriosis patients may be more invasive and prone to peritoneal implantation than control because of higher PA and MMP enzymatic activity. Thus, increased proteolytic activity may be one of the reasons for the invasive properties of the endometrium resulting in the development of endometriosis.

• Journal of Bio-Environment Control
• /
• v.12 no.3
• /
• pp.166-172
• /
• 2003

Rockwool slabs used for hydroponic cultures are expected to have potential to be reused after breakdown as a growing medium component for hydroponic culture of vegetables and cut flowers, pot plants, or plug plants. This study was conducted to test the feasibility of using particles of used rockwool slabs (PURS) mixed with woodchips for growing plug seedlings of ‘Nokkufang’ pepper. In the first experiment growth of pepper seedlings was tested in media of steam sterilized PURS mixed with chestnut woodchips (CW), which was weatherized for six months and screened through 2.8 mm or 5.6 mm sieves, at 100:0, 75:25, 50:50, 28:75 or 0:100 (%, v/v). In the second experiment growth of pepper seedlings was tested in 20 different media containing steam sterilized PURS mixed with 4 mm chestnut woodchips (CW), 4 mm pinc woodchips (PW), coir, peatmoss, or perlite. In the first experiment, there were no significant growth differences as affectcd by particle size of CW, while the overall best growth was achieved il1 the control and l00% PURS. In the second experiment, seedling growth was enhanced as compared to the control in 100% PURS or PURS mixed with peatmoss, coir, or perlite. In contrast, growth was suppressed as the proportion of peatmoss or coir mixed with PURS decreased and the proportion of CW increased. Growth was better in the PURS + peatmoss than in the 100% PURS or PURS + coir, and when woodchips were mixed with coir than peatmoss.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2016

Mineral oil has been widely used as an insulating oil for electrical transformers for a long time, but the necessity of employing new insulation oil such as vegetable oil has been increased due to urgent needs for the biodegradability when it leaks and also for the thermal stability at a higher operation temperature. Although specific periods are required between the production and consumption, there are still short of the data to prove the insulation oils' storage stability depending upon various circumstances and their resources. Thus, this paper demonstrates the insulation oils' oxidation characteristics of both mineral and vegetable oils when each was exposed to different environments for 12 weeks. From this test, some properties including total acid number, water content and dielectric breakdown were changed under specific conditions and resources. Vegetable oils showed higher hydrophilicity and water saturation than those of mineral oils due to their molecular compositions. Under sunlight exposure condition, all insulation oils oxidized and changed their properties when exposing to the direct light, regardless of the resource used.