• Transactions on Electrical and Electronic Materials
• /
• 제14권3호
• /
• pp.121-124
• /
• 2013

The incorporation of 90 nm alumina particles into an epoxy matrix to form a composite microstructure is described in present study. It is shown that the use of ultrafine particles results in a substantial change in the behavior of the composite, which can be traced to the mitigation of internal charges when a comparison is made with conventional $Al_2O_3$ fillers. A variety of diagnostic techniques have been used to augment pulsed electro-acoustic space charge measurement to provide a basis for understanding the underlying physics of the phenomenon. It would appear that, when the size of the inclusions becomes small enough, they act cooperatively with the host structure and cease to exhibit interfacial properties. It is postulated that the $Al_2O_3$ particles are surrounded by high charge concentrations. Since $Al_2O_3$ particles have very high specific areas, these regions allow limited charge percolation through $Al_2O_3$ filled dielectrics. The practical consequences of this have also been explored in terms of the electric strength exhibited. It would appear that there was a window in which real advantages accumulated from the nano-formulated material. An optimum filler loading of about 0.5 wt.% was indicated.

• 한국인터넷방송통신학회논문지
• /
• 제16권1호
• /
• pp.273-281
• /
• 2016

본 논문에서는 인터넷 매체 언어상에서 나타나고 있는 국어 파괴 현상의 고찰을 고찰하여, 이에 대한 기술적 개선 방법으로서 표준어 자동 번역 기술을 제안한다. 실생활 속에서 국어 파괴 현상과 관련된 경험 및 피해 사례들을 설문 조사 및 FGI(Focussed Group Interview)를 통하여 수집 및 분석한 결과를 제시하고, 분석결과 자료 기반으로, '국어 파괴도(degree of Korean destruction)'의 지표를 정의하였다. 국어 파괴도는 표준어 자동 번역 기술이 갖고 있는 번역 오류가 가진 한계를 최소화하여, 표준어 자동 번역 기술의 효율성을 최대로 활용하기 위한 척도로서 활용될 수 있음을 인터넷 매체 문장 2,480 개의 분석을 통하여 제시하였다. 본 논문에서 제안된 국어 파괴도 측정 및 표준어 자동 번역 기술은 Java 언어를 사용하여 REST API 형태로 구현하였으며, 웹브라우저상에서 동작을 확인하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• 제17권E3호
• /
• pp.91-99
• /
• 2001

Plasma reactor was used to generate a high potential difference between two surfaces of concentric pyrex tubes by electrical current. The annular gap of the reactor was calculated by trial and error from the breakdown voltage equation and set at 0.45 cm. The overall objective of this research was to know the effects of the frequency, humidity, and residence time on the formation of nitrogen oxides in a plasma reactor. The primary voltage varied from 50 to 90 volts and the frequency was varied in increments of 10 Hz from 60 to 650 Hz at the primary voltage of 90. The increase in the secondary voltage was not linear but exponential at high frequencies. At a maximum concentration of about 745 ppm, the frequency and secondary voltage was 600 Hz and 4,200 volts, respectively. All tests for the effects of humidity on NO$_{x}$ production were performed at the optimal setting of 90 colts and 600 Hz frequency. Since the NO$_{x}$ production was not an one dimensional phenomenon, competing reactions were assumed to occur in the discharge chamber. The sharp peak concentration of 1,810 ppm was observed at 38% of relative humidity, The enhanced production was choked off, and the production rate rapidly dropped to 3 ppm at above 40% of relative humidity. It is assumed that the corona attacks the most vulnerable molecules in the reaction chamber before attacking other more lightly bonded molecules, possibly at humidities above 38% and the optimized 90 volt setting. Thus, there was not enough energy left after attacking all water molecules to decompose an appreciable amount of $N_2$. If nitrogen breakdown does not occur, then oxides of nitrogen are not likely to be produced.ced.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.21-27
• /
• 2018

The expansion and stable operation of electric power facilities are important factors with development of industrial facilities in modern society. In high-voltage equipment such as GIS, the insulation characteristics may be deterioated by environment-friendly gas adaption and miniaturization. There is also the possibility of accidents due to insulation breakdown due to the deterioration of power facilities. Therefore, it is necessary to extend the diagnosis system to continuously monitor the danger signals of these power equipment and to prevent accidents. Most of the internal defects in the GIS system are conductive particles, floating electrode defects, protrusion defects, and the like. In this case, a partial discharge phenomenon is accompanied. These partial discharge signals occur irregularly and various noise signals are included in the field, so it is difficult to evaluate the reliability in the development of the diagnostic system. In this paper, a study was made on equipment capable of generating a partial discharge simulated signal that can be adjusted in size and frequency to be applied to a diagnostic device by electromagnetic wave detection method. The PD simulated pulse generator consists of a user interface module, a high-voltage charging module, a pulse forming circuit, a voltage sensor and an embedded controller. In order to simulate the partial discharge phenomenon similar to the actual GIS, a discharge cell was designed and fabricated. The application of the prototype pulse generator to the commercialized PD diagnosis module confirmed that it can be used to evaluate the performance of the diagnostic device. It can be used for the development of GIS diagnosis system and performance verification for reliability evaluation.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권2호
• /
• pp.157-164
• /
• 2015

The present work performs three-dimensional flow calculations based on Reynolds Averaged Navier-Stokes (RANS) and Delayed Detached Eddy Simulation (DDES) to investigate the flow field of a transonic rotor (NASA Rotor 37) at near-stall condition. It is found that the DES approach is likely to predict well the complex flow characteristics such as secondary vortex or turbulent flow phenomenon than RANS approach, which is useful to describe the flow mechanism of a transonic compressor. Especially, the DES results show improvement of predicting the flow field in the wake region and the model captures reasonably well separated regions compared to the RANS model. Besides, it is discovered that the three-dimensional vortical flows after the vortex breakdown from the rotor tip region are widely distributed and its vortex structures are clearly present. Near the rotor leading edge, a part of the tip leakage flows in DES solution spill over into next passage of the blade owing to the separation vortex flow and the backflow is clearly seen around the trailing edge of rotor tip. Furthermore, the DES solution shows strong turbulent eddies especially in the rotor hub, rotor tip section and the downstream of rotor trailing edge compared to the RANS solution.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.32-38
• /
• 2015

In this paper, we analyzed the vehicle fire accidents due to damage of vehicle's electrical components, which is applied to a vehicle. In recent development of electrical components technology, approximately 40% of vehicle manufacturing parts have applied electronic circuit technology. Phenomenon such deterioration of insulating performance or electric breakdown on the vehicle's electrical components and printed circuit boards(PCBs) resulted from moisture, contamination and aging due to repetitive operations, lead to the vehicle fire. Therefore, the application of electrical components with adequate electric capacity for vehicle and usage of molding techniques using a non-combustible materials to shut off the oxygen should be applied in order to prevent vehicle fire due to damage of the electrical components and PCBs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1590-1591
• /
• 2011

In this paper, the UV corona camera was developed using the solar blind and Multi Channel Plate(MCP) technology for the target localization of UV camera. UV camera developed a $6.4^{\circ}{\times}4.8^{\circ}$ of the field of view as a conventional camera to diagnose a wide range of slightly enlarged, and power equipment to measure the distance between the camera and the distance meter has been attached. The UV camera was developed and measured using a UV image, as applied voltage increased ultraviolet images of the phenomenon could be obtained. And we investigated properties of UV corona image on insulator in salt water environments. From the results, the breakdown voltage was decreased and UV images were taken at low voltages and the UV image is rapidly increased with increasing High voltage.

• 한국재료학회지
• /
• 제5권2호
• /
• pp.178-183
• /
• 1995

본 연구에서는 상온에서 정방성 조성인 $Pb_{0.9888}Sr_{0.012}(Zr_{0.52}Ti_{0.48})O_{3}$계 세라믹스를 소결 후 직류전계 및 코로나를 이용하는 방법으로 소결시편을 분극한 후 분극방법에 따른 시편의 압전특성을 조사하였으며, 열화현상을 평가하기 위한 방법으로 시편의 내부응력의 차이를 조사하였다. 이 결과 코로나 분극방법은 직류분극에 비하여 $30^{\circ}C$정도 저온에서도 최대 Kp값을 얻을 수 있었으며 열화현상이 천천히 진행되었고 절연파괴가 발생하지 않는 등의 장점이 관찰되었다. 그러나 Kp값은 직류분극의 경우가 코로나 분극에 비하여 약 9~10%정도 높은 값을 나타내었다.

• 한국항공우주법학회:학술대회논문집
• /
• 한국항공우주법학회 2008년도 제40회 국제학술발표대회
• /
• pp.153-161
• /
• 2008

What was once known as common courtesy is rapidly disappearing in the air travel industry, and the violent behavior known as air rage is a constant threat. Once sought after by other industries for advice because of its expertise in customer service, the air travel industry has now slipped to the lowest rungs of companies with unhappy customers. As airlines cut corners in order to avoid bankruptcy, passengers' patience is tested by the stress of flight delays, crowded airports and close packed seating on airplanes. This article examines the situation, strategies used by passengers and ways the airline industry might better inspire courteous behavior in passengers. A cultural expectation of entitlement and competitiveness for limited resources has led to a breakdown in civilized behavior throughout society, both in the United States and internationally. Air travelers faced with rude and intrusive behavior from others on the flight are beginning to find their own ways of coping, such as high quality headphones to block offensive noises, and mechanical devices to keep the seat in front from reclining to the point where it hits their knees. The most potentially effective remedies will come from airlines that enlist cooperation by offering effective passenger education and possibly even incentives. Acceptable airline behaviors need to be plainly defined and stressed for passengers, both before boarding and onboard. In this paper, some methods are suggested to motivate passengers and to inspire courteous behavior.

• KIEE International Transactions on Power Engineering
• /
• 제3A권4호
• /
• pp.214-221
• /
• 2003

In view of the fact that gas insulated switchgear (GIS) is an important piece of equipment in a substation, it is highly desirable to continuously monitor the state of equipment by measuring the partial discharge (PD) activity in a GIS, as PD is a symptom of an insulation weakness/breakdown. However, since the PD signal is relatively weak and the external noise makes detection of the PD signal difficult, it therefore requires careful attention in its detection. In this paper, the algorithm for detection of PD in the GIS using the wavelet transform (WT) is proposed. The WT provides a direct quantitative measure of the spectral content and dynamic spectrum in the time-frequency domain. The most appropriate mother wavelet for this application is the Daubechies 4 (db4) wavelet. 'db4', the most commonly applied mother wavelet in the power quality analysis, is very well suited to detecting high frequency signals of very short duration, such as those associated with the PD phenomenon. The proposed algorithm is based on utilizing the absolute sum value of coefficients, which are a combination of D1 (Detail 1) and D2 (Detail 2) in multiresolution signal decomposition (MSD) based on WT after noise elimination and normalization.