• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.3990-4002
• /
• 2021

CSPACE (Core meltdown, Safety and Performance Analysis CodE for nuclear power plants) for a simulation of severe accident progression in a Pressurized Water Reactor (PWR) is developed by coupling of verified system thermal hydraulic code of SPACE (Safety and Performance Analysis CodE for nuclear power plants) and core damage progression code of COMPASS (Core Meltdown Progression Accident Simulation Software). SPACE is responsible for the description of fluid state in nuclear system nodes, while COMPASS is responsible for the prediction of thermal and mechanical responses of core fuels and reactor vessel heat structures. New heat transfer models to each phase of the fluid, flow blockage, corium behavior in the lower head are added to COMPASS. Then, an interface module for the data transfer between two codes was developed to enable coupling. An implicit coupling scheme of wall heat transfer was applied to prevent fluid temperature oscillation. To validate the performance of newly developed code CSPACE, we analyzed typical severe accident scenarios for OPR1000 (Optimized Power Reactor 1000), which were initiated from large break loss of coolant accident, small break loss of coolant accident, and station black out accident. The results including thermal hydraulic behavior of RCS, core damage progression, hydrogen generation, corium behavior in the lower head, reactor vessel failure were reasonable and consistent. We demonstrate that CSPACE provides a good platform for the prediction of severe accident progression by detailed review of analysis results and a qualitative comparison with the results of previous MELCOR analysis.

• Journal of the Korean Society of Food Culture
• /
• 제22권4호
• /
• pp.475-481
• /
• 2007

This study was carried out to determine the quality characteristics of Jeju mandarin orange jelly with various gelling agent such as agar, ${\kappa}-carrageenan$ and gellan gum for the aged. The concentration of agar was 0.4-0.6% and that of ${\kappa}-carrageenan$ and gellan gum was 0.2-0.4%. The color value, gelling temperature, melting temperature, break down rate, textural properties and sensory acceptance test of Jeju mandarin orange jelly with various gelling agent were measured. Average age of the subjects for acceptance test was 78.23. Redness and yellowness of Jeju mandarin orange jelly with agar was lower than that with ${\kappa}-carrageenan$. The gelling and melting temperature of Jeju mandarin orange jelly with agar was lowest among the jellies. Break down rate of Jeju mandarin orange jelly with agar was highest among the jellies. Above results showed that the stability of Jeju mandarin orange jelly with agar was inferior than that with ${\kappa}-carrageenan$ and gellan gum. Hardness, adhesiveness and springiness of Jeju mandarin orange jelly with agar was lowest among the jellies and sensory acceptance of Jeju mandarin orange jelly with gellan gum was highest among them. Thus, gellan gum was appropriate gelling agent for the Jeju mandarin orange jelly with regard to the acceptability and the depression of sour taste in Jeju mandarin orange jelly could improve the acceptability for the aged.

• Journal of the Korea institute for structural maintenance and inspection
• /
• 제21권5호
• /
• pp.49-55
• /
• 2017

In the seventies, a number of researchers carried out experiments on pullout tests with prototype equipment, and the pullout test was certified as a reliable nondestructive testing(NDT) method for determining the strength of concrete. To estimate the strength of high-strength concrete, we propose a simplified pullout test that uses as a break-off bolt a standard 10mm bolt with a groove on the shaft, an insert nut, and a pullout instrument that includes a hydraulic oil pump without a load cell. To verify the advantages of the simplified pullout test(low cost, simplicity, and convenience), four wall specimens were tested with two levels of concrete strength, 30 MPa and 50 MPa, using a simplified pullout tester with a load cell. The pullout load and concrete compressive strength were measured every day until day 7, day 14, day 21 and day 28. It was found that the pullout load was very similar to the compressive strength. Therefore, we have verified that a simplified pullout test can be used to evaluate the in-place strength of high-strength concrete in structures. The prediction equation of the groove diameter of the break-off bolt(y) with the concrete strength(x) was derived as y=0.05x+3.79, with a coefficient of determination of 0.88 found through regression analysis.

• Korean Journal of Medicinal Crop Science
• /
• 제13권4호
• /
• pp.186-189
• /
• 2005

Plant flowering should be mainly affected by temperature and daylength. The study was carried out to measure the effect of temperature during winter on growth and floret flowering of Orostachys japonicus grown under 2 hour night break. Temperature was controlled above $10^{\circ}C$ and $20^{\circ}C$ as heating boilers were run below them to compare the natural temperature. Night-break treatment was done on August 25 and afterward samples were taken every 4 weeks to check growth, morphological and flowering related characters. Plant height, inflorescence length, number of leaves including bracts and stem diameter were increased in heating temperatures of > $10^{\circ}C$ compared to natural temperature although similar in the two heating ones. Leaves and bracts, florets, stem, root, shoot and total dry weights showed the same response as the above morphological and flowering related characters. Florets were more formed but less flowered with higher temperatures. Anthesis rates of individual plant were 100% in natural temperature, 25% in > $10^{\circ}C$ heating temperature but none in > $20^{\circ}C$ heating temperature.

• Tunnel and Underground Space
• /
• 제25권1호
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• Transactions of the Korean Society of Mechanical Engineers
• /
• 제16권6호
• /
• pp.1121-1140
• /
• 1992

In metal cutting the shape of generated chip varies according to cutting conditions, characteristics of workpiece and geometry of cutting tool. The best surface roughness of machined workpiece is obtained when generating flow type contrinuous chip. If the generated chip is not broken, that is not only tangled workpiece and cutting tool, but also may give damage on the machined surface of workpiece or danger for a operator. The flow type continuous chip may bring the low productivity in high speed any heavy cutting, automatic machining process and non-human factory. There are two type of chip break process ; controlling cutting condition and using chip breaker. In present study we carried out the experiment on new type chip breaker compared with conventional type and proved the efficiency of a new type and showed the chip break condition to be applied in actual metal cutting. In the experiment SM 20 C as a workpiece material and WC as a tool material were used and cutting speed of 30-150m/min, feed of 0.071-0.210mm/rev and depth of cut of 1mm were applied as cutting condition. The results of the experiment are as follows : (1) The mechanism of chip curl can be explained more clearly by plastic flow of workpiece material and moment of shearing force. (2) The most effective radius of curled chip and flat distance from cutting edge is 2.0-2.5mm and 1.5mm in both types. (3) The effective inclination angle of chip break surface and side cutting edge angle are 30.deg.- 45.deg. and 20.deg. in conventional type, while the radius of arc surface, lower arc angle A, upper arc angle B and side cutting edge angle are 3mm, 20.deg.- 45.deg., 0.deg.- 45.deg. and 10.deg.- 20.deg. in new type. (4) The probability to be obtained 100% chip breaking ratio is much higher in new type than in conventional type.

• Nuclear Engineering and Technology
• /
• 제23권1호
• /
• pp.66-80
• /
• 1991

The LOFT intermediate break experiment L5-1, which simulates 12 inch diameter ECC line break in a typical PWR, has been analyzed using the reactor thermal/hydraulic analysis code RELAP5/MOD2, Cycle 36.04. The base calculation, which modeled the core with single flow channel and two heat structures without using the options of reflood and gap conductance model, has been successfully completed and compared with experimental data. Sensitivity studies were carried out to investigate the effects of nodalization at reactor vessel and core modeling on major thermal hydraulic parameters, especially on peak cladding temperature(PCT). These sensitivity items are : single flow channel and single heat structure (Case A), two flow channel and two heat structures (Case B), reflood option added (Case C) and both reflood and gap conductance options added (Case D). The code, RELAP5/MOD2 Cycle 36.04 with the base modeling, predicted the key parameters of LOFT IBLOCA Test L5-1 better than Cases A,B,C and D. Thus, it is concluded that the single flow channel modeling for core is better than the two flow channel modeling and two heat structure is also better than single heat structure modeling to predict PCT at the central fuel rods. It is, therefore, recommended to use the reflood option and not to use gap conductance option for this L5-1 type IBLOCA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제13권5호
• /
• pp.2232-2239
• /
• 2012

This study set out to investigate the effects of the same amount of resting(30 minutes) after $VO_2max$ 20%, 40%, and 60% exercise on the variation of cortisol and catecholamine, serum stress hormones. The research efforts led to the following conclusions: First, there were no significant differences in serum cortisol concentration between the $VO_2max$ 20% group and the $VO_2max$ 40% group, but there were some significant differences in the significance level of p=.002 in the $VO_2max$ 60% group. Second, there were no significant differences in serum catecholamine concentration between the $VO_2max$ 20% group and the $VO_2max$ 40% group, but there were some significant differences in the significance level of p=.001 in the $VO_2max$ 60% group. Third, no significant differences were found in the changing rates of serum cortisol concentration between right after exercise and during break among different levels of exercise intensity according to measuring time. Fourth, there were significant differences in the changing rates of serum catecholamine concentration in the significance level of p=.000 right after exercise and in the significance level of p=.034 during break In short, there were significant differences only in the $VO_2max$ 60% group according to exercise intensity when the different groups took the same amount of break after exercise. The $VO_2max$ 60% group was also the only group that showed significant differences in the changing rates of cortisol and catecholamine. In conclusion, taking a break after exercise can generate huge effects only when the exercise intensity level is moderate or higher. That is, taking a break will have no significant effects when the exercise intensity level is lower than moderate.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제42권5호
• /
• pp.597-603
• /
• 1997

Orostachys japonicus, Wasong as herb medicine, has been artificially cultivated as an anti-tumor medicinal. The experiment was carried out to examine the effect of natural daylength as control or night-break treatment (NB) imposed at June 20, July 18 or Aug. 15 on its growth, dry weights of leaf and bract, stem, floret and root, and morphological characters including bolting and floret flowering. After a plant was grown in a 15cm plastic pot containing a 2 : 1 soil : peat moss mixture on May 23, three treatments with above differing night-break had been imposed around midnight up to Nov. 7. The plants were sampled 3 times at the same day forced to night-break and then done 6 times by 2-week interval after the final NB. Plant height and inflorescence length of all the NB increased with delayed NB but declined in comparison with the natural daylength. No. of leaves including bracts showed similar response to plant height although NB given before July 18 showed less leaves and bracts. Stem diameters of NB were continuously increased to middle Sept. to middle Oct. while that of natural daylength decreased after middle Oct. Natural daylength or NB given on Aug. 15 had greater fraction, shoot and total dry weights resulting from increment of leaf and bract up to Aug. or of floret, stem and root after Sept. The earlier NB, the later formation of florets and the less number of flowering florets whereas in natural daylength florets on inflorescence begun to be formed from middle Sept. were sharply increased up to middle Oct. when all the plants were flowered. Bolting was not formed in the plant of the earliest NB of June 20, and thereby no anthesis of florets up to early Nov. It was concluded that year-round cultivation of Orostachys japonicus plants was possible through controlling the NB timing because its bolting and flowering of florets separately occurred.

• The Journal of the Petrological Society of Korea
• /
• 제23권4호
• /
• pp.293-309
• /
• 2014

The Qinling-Dabie-Sulu-Hongseong-Odesan collision belt was formed by the collision between the North China and South China Cratons during late Permian to Triassic. During the collision, Triassic post-collision igneous rocks regionally intruded in the Qinling and the Hongseong-Odesan collision belts which represent the western and eastern ends of the collision belt, respectively. However, no and minor Triassic post-collision igneous activities occur in the Dabie and Sulu belts respectively. The peak metamorphic pressure conditions along the Qinling-Dabie-Sulu-Hongseong-Odesan belt indicate that the slab break-off occurred at the depth of ultra-high pressure (UHP) metamorphic condition in the Dabie and Sulu belts and at the depths of high pressure (HP) or high pressure granulite (HPG) metamorphic condition in the Qinling and Hongseong-Odesan belts. In the Dabie and Sulu belts the heat supply from the asthenospheric mantle through the gab formed by slab break-off could not cause an extensive melting in the lower continental crust and lithospheric mantle directly below it due to the very deep depth of slab break-off. On the other hand, in the Qinling and Hongseong-Odesan belts, shallower slab break-off caused the emplacement of regional post collision igneous rocks. The post-collision igneous rocks occur in the area to the north of the Mianlu Suture zone in the western Qinling belt and crop out continuously eastwards into the areas to the north of the Shangdan Suture zone in the eastern Qinling belt through the areas within the South Qinling block. This distribution pattern of post collision igneous rocks suggests that the Triassic collision belt in the Mianleu Suture zone may be extended into the Shangdan Suture zone after passing through the South Qinling block instead into the boundary between the South Qinling block and the South China Craton.