• Journal of the Korean Wood Science and Technology
• /
• v.42 no.4
• /
• pp.376-384
• /
• 2014

This study investigated the effect of nanocellulose, such as microfibrillated cellulose (MFC) and cellulose nanocrystal (CNC), and aminated starch on tensile property and thermal stability of plasticized starch film. Glycerol (23 wt%) was used as a plasticizer and nanocelluloses of 1-30 parts per hundred parts of resin (phr) in the basis of plasticized starch were added. Tensile strength and elastic modulus increased with increasing nanocellulose addition amount, whereas elongation at break decreased. Tensile properties of MFC-reinforced starch film were higher than those of CNC-reinforced film. Optimum addition amount of aminated starch, which is commonly used for paper sizing, to improve tensile property of film, was found to be 5%. And 1% addition of aminated starch showed the best effect in the improvement of tensile property of the film. Thermal stability was improved with the addition of MFC to plasticized starch film with and without aminated starch.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.142-151
• /
• 2005

Several advanced countries have been continually developed PHC pile cutting automation machines for improving productivity, safety and quality of the conventional PHC pile cutting work. However, the target work of the previously developed PHC pile cutting automation machines is only crushing the head of PHC pile. Dangerous grinding work is still performed by workers with seven inch hand grinder. In domestic construction industry, the PHC pile cutting work is usually performed by a crusher and three to four skilled workers. Recent analysis results of the PHC pile cutting work reveal that it frequently makes a lot of cracks which significantly reduce the strength of the pile and is labor-intensive work. The primary objective of this study is to propose the end-effector which can effectively break PHC pile without any longitudinal cracks and to develop an automated pile cutting machine having unified grinder and crusher parts through a wide variety of laboratory and field tests. It is anticipated that the development of the automated pile cutting machine would be able to bring improvements in safety, productivity, quality as well as cost saving.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.11
• /
• pp.18-24
• /
• 2000

(Ba,Sr)$TiO_3$ thin films have attracted great interest as new dielectric materials of capacitors for ultra-large-scale integrated dynamic random access memories (ULSI-DRAMs) such as 1 Gbit or 4 Gbit. In this study, inductively coupled $BCl_3/Cl_2/Ar$ plasmas was used to etch (Ba,Sr)$TiO_3$ thin films. RF power/dc bias voltage=600 W/-250 V and chamber pressure was 10 mTorr. The $Cl_2/(Cl_2+Ar)$ was fixed at 0.2 the (Ba,Sr)$TiO_3$ thin films were etched adding $BCl_3$. The highest (Ba,Sr)$TiO_3$ etch rate is $480{\AA}/min$ at 10 % $BCl_3$ to $Cl_2/Ar$. The change of Cl, B radical density measured by optical emission spectroscopy(OES) as a function of $BCl_3$ percentage in $Cl_2/Ar$. The highest Cl radical density was shown at the addition of 10% $BCl_3$ to $Cl_2/Ar$. To study on the surface reaction of (Ba, Sr)$TiO_3$ thin films was investigated by XPS analysis. Ion bombardment etching is necessary to break Ba-O bond and to remove $BaCl_2$. There is a little chemical reaction between Sr and Cl, but Sr is removed by physical sputtering. There is a chemical reaction between Ti and Cl, and $TiCl_4$ is removed with ease. The cross-sectional of (Ba,Sr)$TiO_3$ thin film was investigated by scanning electron microscopy (SEM), the etch slope is about 65~70$^{\circ}$.

• Korean Journal of Social Welfare
• /
• v.67 no.3
• /
• pp.125-150
• /
• 2015

The purpose of this study is to explore all the deaf marriage experiences. To achieve this purpose, the qualitative case research approach was used to analyze the couple. This researcher following same issues from 5 couples case study analysis. This researcher set 5 titles and analyze from the 5 main issues about the deaf couple's experience as time goes by. The titles are 'finally the marriage spouses both deaf', 'to overcome communications difficulties', 'worried about raising children and get some help from other people and try something', 'try to get over the difficulties and hardships', 'recovering family relationship and challenge.' Through this study, understanding the deaf couples desire in having a family and live a normal life after becoming parents is "in a family deaf culture" wherein they aspire to become more mature and experienced deaf persons. But the meaning of maintaining constancy was not just keeping their situation by taking familiar things hence there were no challenges. Keeping the constancy, maintaining a family since marriage, delivering and raising their children, make them realize some laws of life. They correspond well and break the narrow limited cultural way of thinking and recognized a broader sense of understanding while keeping constancy. Their life that is keeping their culture and experiencing matured life will be a good theoretical basis for understanding the deaf culture.

• Journal of the Korean Society of Radiology
• /
• v.8 no.7
• /
• pp.371-376
• /
• 2014

The process of flip-chip bump bonding, Au wire bonding and encapsulation were sucessfully developed and modularized. The CdTe sensor and ROIC were optimally jointed together at $150^{\circ}C$ and $270^{\circ}C$ respectively under24.5 N for 30s. To make SnAg bump on ROIC easy to be bonded, the higher bonding temperature was established than CdTe sensor's. In addition, the bonding pressure was lowered minimally because CdTe Sensor is easier to break than Si Sensor. CdTe multi-energy sensor module observed were no electrical failures in the joints using developed flip chip bump bonding and Au wire bonding process. As a result of measurement, shearing force was $2.45kgf/mm^2$ and, it is enough bonding force against threshold force, $2kgf/mm^2s$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.3
• /
• pp.140-149
• /
• 2002

This paper describes the characteristics of beam-tilting slot away waveguide antennas for mobile DBS reception. As a basic study of slotted waveguide array, design for 16 slot elements located on a broad-wall waveguide is considered. Design parameters such as slot length, space between each slot and cross slot angle of antennas with the beam-tilting characteristics are calculated by method of moments. Based on these results, the radiation waveguide antennas with 16-element $\times$16-array are designed and fabricated. The measured main beam direction angles of the fabricated antennas are 48$^{\circ}$to 50$^{\circ}$depending on the measured frequencies and it shows good agreement with prediction. The measured 3 dB beam width of elevation pattern is about 13$^{\circ}$, and the axial ratio and the gain measured at DBS band are observed 2.8 dB below and 24 dBi above, respectively. In order to evaluate a performance of the fabricated waveguide planar antenna, it is combined with the satellite tracking control system and the field performance test of antenna mounted on a mobile vehicle is carried out at highway. During the measurement, it was possible to watch television without a break signal in a driving vehicle and an excellent performance of the proposed antennas was demonstrated.

• Clean Technology
• /
• v.20 no.3
• /
• pp.205-211
• /
• 2014

Biomass-based plastics containing the biomass content higher than 25 wt% have been considered as environment-friendly materials due to their effects on the reduction in the $CO_2$ emission and petroleum consumption as well as biodegradability after use. This article described the effect of the additions of oxo-biodegradable additive, 4 kinds of plant biomass, unsaturated fatty acid, citric acid in the properties of polyethylene films. Bio films were prepared using a variety of biomasses and tested for feasibility as a food packaging film. Mechanical properties such as tensile strength and percent elongation at break were evaluated. Husk biomasses from such as corn, soybean, rice, and wheat were pulverized using air classifying mill (ACM) and four different types of packaging films with thickness of $50{\mu}m$ were prepared using the pulverized biomass and low density polyethylene/linear low density polyethylene. The packaging film with wheat husk biomass was found to have greater mechanical properties of elongation and tensile strength than the other samples. Biodegradability of bio film was measured to be 51.5% compared to cellulose.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.141-145
• /
• 2013

The aim of this study was to investigate the effect of two male cultivars of asparagus with low different chilling periods on bud breaking, relative spear growth rate, shoot number and yield. Four-month-old plants of two male cultivars of asparagus were dried to impose dormancy and placed in a coldroom at $5^{\circ}C$ to satisfy the chilling requirement for 0, 2, 4, and 6 weeks. After the specified chilling time, the pots were placed in greenhouse. The results showed that mean days to bud break of 'Jersey Giant' significantly decreased with an increasing chilling period from 0 to 6 weeks, but 'Jersey Supreme' was not affected. The relative spear growth rate of 'Jersey Supreme' was significantly stimulated by chilling compared to non-chilled plants. Shoot production and total spear weight of 'Jersey Supreme' tended to be greater than 'Jersey Giant' irrespective of chilling treatments. Following low temperature treatment, 'Jersey Supreme' showed shorter dormant period than 'Jersey Giant', faster growth of spear. The present study showed that asparagus male cultivar at duration of chilling treatment had an affirmative effect on bud breaking, spear growth rates, shoot number and yield of asparagus.

• Land and Housing Review
• /
• v.7 no.4
• /
• pp.239-249
• /
• 2016

This study aims to find implications for urban economic regeneration strategies of local initiative by analyzing of promoting regional strategic industries, both Seongnam and Goyang in terms of regional industrial policy, institution and specialized service agency. The main results based on the case studies are as follows. First, It is a top priority to formulate the policy direction, such as selecting strategic industries and prepare means for improving it. It should keep reliability and continuity for inducing economic units. Second, It is necessary to consider the effectiveness and diversity of institutions. The institutions to be formalized by municipal ordinance and rules for making the successful implementing system of policies. It is necessary to implement strategic industry policy linked with the central government or public organizations for expanding of a diversity of policies. It is necessary to change in viewpoint on the deregulation and tax break for the private sectors as inducements to achieve the regional economy activation. Third, It is necessary to introduce the specialized service agency to improve an effectiveness and efficiency of institutions and accelerate a network within economic units.

• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.91-100
• /
• 2009

The purpose of this study is to introduce the Levying Garage Option on Car Buyers which has become operative firstly in Korea, and to suggest the way to activate the system, hearing the view of Jeju residents with positive and negative function of parking. Levying Garage Option on Car Buyer is the system to apply a law for establishing garages to all of vehicles. Especially this is proposed to correct the disorder of Local street night parking, to improve the fine view of street, and to recover the original function of street to residents. To make this system successful there should be separate solutions at the densely built up area as a result of survey. This study conduct the Logistic Regression Analysis for and against the system. If the more residents approve the system, we should concern about the several solutions such as easing the distance between the garage and street, regulating, and special plan for an apartment house, etc. The suggestions are as follows. First, the policy needs to ease the distance between the garage and street gradually. Second, the Jeju government need to offer the residents the incentive such as reduce or exempt the tax and make them establish the private parking lot with supplying the low interest loan. Third, there should be connected with the project to break up the fences of their houses.