• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.34-38
• /
• 2009

Nitrous oxide, which is used as an anesthetic gas, has been shown to be a chronic health hazard. It is necessary to monitor and control the nitrous oxide exposure of the operating theaters staff. In this study, N2O exposure level of the operating nurses is assessed with a GC-ECD. The nitrous oxide gas is collected on a molecular sieve 5A contained in a glass tube and desorbed for 12 hours at $100^{\circ}C$ in heating block. As a result of the test using GC-ECD, calibration curve's $R^2$ of $N_2O$ is 0.9992, LOD is $0.96{\mu}g$/injection, LOQ is $3.21{\mu}g$/injection, desorption efficiency is 94.78 4.50% in average and break through is within 10% compared with the concentration. The average concentration before operation is 5.12ppm and it is 42.3ppm during operation. There are a significant difference showing that the P value is lower than 0.05. Assessing exposure level to nitrous oxide based on nurses' working positions, the exposure levels do not show significant difference( P>0.005). And $N_2O$ in active sampling method is higher than passive sampling method(P<0.05).

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.90-95
• /
• 2014

Nylon66 extrudates as a function of the extrusion number were prepared by a twin screw extruder. Chemical structures, thermal properties, melt index, crystal structures, mechanical properties such as the tensile strength, elongation at break and impact strength, and rheological property were measured by FT-IR, $^1H$-NMR, melt indexer, DSC, TGA, XRD, universal tensile tester, Izod impact tester, and rheometer. FT-IR and $^1H$-NMR characterizations indicated that the number of extrusions did not affect the chemical structure. The decrease in the molecular weight was checked by the melt index of extrudates. There were no effects of the thermal history on the melting and degradation temperature. The tensile and impact strength and modulus were found to be similar, regardless of the number of extrusions, but the elongation decreased significantly. The complex viscosity of extrudates at low frequencies decreased with the extrusion number. No structural changes after extrusion were confirmed from the fact that there was no change in the slope and shape of G'-G" plot.

• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.111-122
• /
• 1996

S. chibaensis J-59 produced an extracellular xylanase in a CSL medium composed of 1.5% com steep liquor, 0.1% $MgSO_4{\cdot}7H_2O$, 0.012% $CoCl_2{\cdot}6H_2O$, and 0.15% glucose containing xylan. but it did not produce in the culture medium containing xylose. The production of enzyme reached to a maximum level (0.83 uints/ml) when bacteria were cultured in 2.5 l jar fermentor for 48hrs at $30^{\circ}C$ and pH 7.0. Furthermore, S. chibaensis J-59 produced an intracellular glucose isomerase in a medium containing xylan and/or xylose. Xylanase was purified 29-fold over the culture supernatants of S. chibaensis J-59 by ammonium sulfate fractionation, chromatography on DEAE-Sephadex A-50, and gel filtration on Sephadex G-200. The purified enzyme is a monomeric enzyme with a native molecular mass of 25 kDa and a subunit molecular mass of 25 kDa. The purified enzyme requires $Mg^{2+}$ for activity, $Ca^{2+}$, $Co^{2+}$ is not an inhibitor but inhibit by $Fe^{3+}$, $Hg^{2+}$, and $Cu^{2+}$, sodium dodecyl sulfate, N-bromosuccinide. Pattern of hydrolysis demonstrated that the xylanase was an endo-splitting enzyme able to break down birchwood xylan at random giving xylobiose, xylotriose and xylotetrose as the main end products.

• The KIPS Transactions:PartD
• /
• v.15D no.2
• /
• pp.271-284
• /
• 2008

Self-healing is an approach to evaluating constraints defined in target system and to applying an appropriate strategy when violating he constrains. Today, the computing environment is very complex, so researches that endow a system with the self-healing's ability that recognizes problem arising in a target system are being an important issues. However, most of the existing researches are that self-healing developers need much effort and time to analyze and model constraints. Thus, this paper proposes an automated approach to determine problem arising in external and internal system environment. The approach proposes: 1) Specifying the target system through the models created in design phase of target system. 2) Automatically creating constraints for external and internal system environment, by using the specified contents. 3) Deriving a dependency model of a component based on the created internal state rule. 4) Translating the constraints and dependency model into code evaluating behaviors of the target system, and determinating problem level. 5) Monitoring an internal and external status of system based on the level of problem determination, and applying self-healing strategy when detecting abnormal state caused in the target system. Through these, we can reduce the efforts of self-healing developers to analyze target system, and heal rapidly not only abnormal behavior of target system regarding external and internal problem, but also failure such as system break down into normal state. To evaluate the proposed approach, through video conference system, we verify an effectiveness of our approach by comparing proposed approach's self-healing activities with those of the existing approach.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.12
• /
• pp.1160-1165
• /
• 2018

Purpose: To evaluate the availability of ultra-wide field fundus photography based on eye steering technique to diagnose retinal breaks in patients with symptomatic posterior vitreous detachment (PVD). Methods: The medical records of patients with symptomatic PVD were reviewed. Retinal breaks were independently identified using four eye steering capture images of ultra-wide field fundus photographs. The sensitivity and specificity of eye steering capture imaging for diagnosing retinal breaks were calculated. Results: A total of 94 eyes of 94 patients were included. Using fundus examination after pupil dilatation, retinal breaks were diagnosed in 42 (45%) eyes. The sensitivity of the eye steering capture imaging was 98% (95% confidence interval [CI]: 88-100%), and the specificity was 98% (95% CI: 90-100%). Of the 58 retinal tears, 28 (97%) involving the superior quadrant, 10 (100%) involving the inferior quadrant, 6 (100%) involving the nasal quadrant, and 13 (100%) involving the temporal quadrant were identified using eye steering capture images. Conclusions: Ultra-wide field fundus photography based on eye steering technique was useful for diagnosing retinal breaks in patients with symptomatic PVD. However, eye steering photography could not adequately replace the fundus examination after pupil dilatation in all cases.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1082-1086
• /
• 2018

Purpose: To report a case of a 60-year-old female with rhegmatogenous retinal detachment, presenting with suprachoroidal hemorrhage after vitrectomy. Case summary: A 60-year-old woman visited our clinic complaining of floaters, flashing, and blurred vision. Best-corrected visual acuity was 0.1 in her left eye, and fundus examination of her left eye revealed macula-involved retinal detachment with a retinal break at the superotemporal quadrant. She underwent cataract surgery, 23-gauge transconjunctival sutureless vitrectomy, and 14% C3F8 gas tamponade under general anesthesia. One hour after anesthesia recovery, she suddenly complained of severe pain in her left eye. The intraocular pressure measured after removal of the pressure patch from her left eye was as high as 58 mmHg. Her ocular pain improved spontaneously within 10 minutes, and the intraocular pressure decreased to 8 mmHg. Fundus examination of her left eye revealed a reddish-brown raised lesion, suggesting suprachoroidal hemorrhage. She was placed in a prone position with a pressure patch over her left eye. Bleeding through the sclerotomy site was observed 1 day after surgery. Subsequently, hemorrhagic choroidal detachment of her left eye continued to decrease without deterioration. Three weeks after surgery, the patient received an intravitreal injection of 100% C3F8 gas into her left eye. At 3 months after surgery, best-corrected visual acuity had improved to 0.8 in her left eye, and the retina was stable. Conclusions: Suprachoroidal hemorrhage may be suspected in a patient complaining of severe ocular pain after vitrectomy.

• Elastomers and Composites
• /
• v.38 no.3
• /
• pp.243-250
• /
• 2003

Polyurethane waterproof (PW) coatings are increasingly demanded in Korea for repairing cracks on old building roofs and construction of many sporting facilities. Calcium carbonate, a common filler, is incorporated in PW compositions. In this study, PW coatings were prepared by substituting a part of calcium carbonate with fly ash. The maximum amounts of calcium carbonate which can be substituted by fly ash obtained in the cyclone and bag filter dust collectors were 20 and 10%, respectively. It was found that the curing rate of PWs ran be controlled by varying the amount of Pb-octoate catalyst. The elongations at break as well as tensile strength and tear strength of PW coatings containing fly ash could also be adjusted such that their values were comparable to those of a standard PW coating by varying relative amounts of some components. However, the amount of cadmium, mercury, and lead leached from PW coatings containing fly ash obtained from the bag filter collector exceeded the respective allowed upper limits, mainly due to the initial high contents of them in the fly ash. On the other hand, PW coatings containing fly ash obtained from the cyclone collector exhibited better mechanical properties and did not release any significant amounts of the heavy metals. Thus, it was concluded that PW coatings containing fly ash can be utilized for practical applications as long as an appropriate fly ash is used.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2534-2546
• /
• 2021

Nuclear emergency preparedness and response is an essential part to ensure the safety of nuclear power plant (NPP). Key support technologies of nuclear emergency decision-making usually consist of accident diagnosis, source term estimation, accident consequence assessment, and protective action recommendation. Source term estimation is almost the most difficult part among them. For example, bad communication, incomplete information, as well as complicated accident scenario make it hard to determine the reactor status and estimate the source term timely in the Fukushima accident. Subsequently, it leads to the hard decision on how to take appropriate emergency response actions. Hence, this paper aims to develop a method for rapid source term estimation to support nuclear emergency decision making in pressurized water reactor NPP. The method aims to make our knowledge on NPP provide better support nuclear emergency. Firstly, this paper studies how to build a Bayesian network model for the NPP based on professional knowledge and engineering knowledge. This paper presents a method transforming the PRA model (event trees and fault trees) into a corresponding Bayesian network model. To solve the problem that some physical phenomena which are modeled as pivotal events in level 2 PRA, cannot find sensors associated directly with their occurrence, a weighted assignment approach based on expert assessment is proposed in this paper. Secondly, the monitoring data of NPP are provided to the Bayesian network model, the real-time status of pivotal events and initiating events can be determined based on the junction tree algorithm. Thirdly, since PRA knowledge can link the accident sequences to the possible release categories, the proposed method is capable to find the most likely release category for the candidate accidents scenarios, namely the source term. The probabilities of possible accident sequences and the source term are calculated. Finally, the prototype software is checked against several sets of accident scenario data which are generated by the simulator of AP1000-NPP, including large loss of coolant accident, loss of main feedwater, main steam line break, and steam generator tube rupture. The results show that the proposed method for rapid source term estimation under nuclear emergency decision making is promising.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1901-1922
• /
• 2021

Since most large earthquakes occur by reactivation of preexisting active faults, it is important to understand the locations and characteristics of active faults in terms of earthquake hazard research and earthquake disaster prevention. Recently, several remote sensing techniques are broadly used for lineament analysis performed prior to field surveys in active fault surveys. The aim of this paper is introducing simple principles and application examples of each remote sensing technique (satellite remote sensing, airborne remote sensing, InSAR, LiDAR) widely used for active fault investigation. This paper also explains the analytical methods for the slope break generated by fault activity based on GIS and the horizontal displacement of the strike-slip fault. In discussion, we would like to discuss the problems and solutions on making DEM based on aerial photography, and a new developed technique (RRIM) to overcome the problems of DEM based on aerial LiDAR. Understanding remote sensing techniques used for active fault investigation and utilizing appropriate methods depending on the situation and limitations of each remote sensing technique are important for effective active fault investigation.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.12
• /
• pp.221-226
• /
• 2021

This study was examined the effect and the continuity of music therapy for reduce on post-traumatic stress (PTS) in 119 emergency medical technicians (EMTs). The subjects of the study were 42 EMTs in the C area, and the study was conducted from November 25, 2019 to March 1, 2020. The experimental group conducted a total of ten music therapy programs twice a day for five days. The session-specific program was conducted by two music therapists, including the early, mid, late, and closed stages. Each step applied intervention techniques necessary for goals such as improvisation, rhythm making, Nanta, and couple physical activities. The control group was required to take a free break (TV viewing, cell phone games, sleep, exercise, etc.) at the same time as the experimental group's program. The study found that the control group had no difference in PTS before and after the application of music therapy, but the experimental group had a significant decrease in PTS immediately after the application of music therapy and a gradual increase in PTS after 4 and 12 weeks (p<.05). Repetitive music therapy is judged to be an effective way to mitigate the PTS leve for EMTs.