• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.459-467
• /
• 2016

This study was conducted to evaluate and identify what factors influence the satisfaction of the users for the fast-growing social network game based on the mobile. To this end, we looked around the variable product characteristic factor, quality and the consumer characteristic factor, user self-determination. Also we surveyed 211 male and female college students. The first finding was that all the sub-factors of the quality factor had positive effects on the satisfaction of the mobile social network games. The second finding was that all the sub-factors of the self-determination factor had positive effects on the satisfaction of the mobile social network games. The third finding was that only the sub-factors of quality had positive relative effects on the satisfaction of the mobile social network games, in the order of playfulness, usability, functionality from the most to the least. The findings of this study are expected to offer meaningful and practical suggestions for the development of high quality game contents for the user convenience, as well as the academic significance, the expansion of game-related area of research through the break from the traditional research trends, technology and engineering point of view and from the PC-based online game.

• Food Science and Preservation
• /
• v.15 no.4
• /
• pp.542-549
• /
• 2008

The effects of Angelica gigas nakai powder(AP) addition on bread dough were investigated by preparing dough with 0-10%(w/v) powder. Dough raising power, gluten levels, rapid visco properties, and falling number, were investigated. The rheological properties of dough as measured by mixography, farinography, alveography, color assessment, and with scanning electron microscopy, were examined. Increase in AP concentration resulted in a linear decrease in gluten content. Dough raising power and extensibility were decreased by water absorption rate, and resistance increased. Dough stability and rose when AP was present at 1-2%(w/v). Water absorption, dough stability, and dough valorimeter values also rose when AP was present at 1-2%(w/v), but AP induced weakness in the dough, as revealed through farinography, and also resulted in a lowering of initial pasting temperature and the temperature at peak viscosity. A decrease in viscosity at the peak point, and(as revealed by RVA), a decrease in extensibility, an increased resistance to extension, and a rise in the energy required for extension, were also seen when AP powder was added, as was an increase in the R/E ratio. Overall, the addition of AP to dough to levels of 1% or 2%(both w/v) is thought to be useful in the preparation of a functional white pan bread, and results in quality improvements.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1115-1123
• /
• 2008

When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.

• Clean Technology
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2014

Because of the water scarcity caused by the increase of salinity in the underground water, seawater desalination stands out as one of the most promising solution. As there are so much energy costs in operating desalination plants, new hybrid process which is more effective should be researched. A geothermal VMD (vacuum membrane distillation) hybrid process is a competitive alternative for seawater desalination. Because geothermal energy has significant characteristics of high capacity factor to operate the power plant at full capacity for 24 hour per day, it can be a priority heat source of VMD superior to any other renewable energies such as solar and wind power. In this study, we design a geothermal VMD hybrid process, analyze it economically and finally compare the result with a case of conventional VMD process. Geothermal VMD hybrid process generates $23,822,409 of NPV (net present value) more than the conventional VMD process in case of 5% discount rate. The break-even point between these processes is 5.36 year. Sensitivity analysis indicates that steam cost is the most decisive influence variable to the economic outcome.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.141-146
• /
• 2005

Unstable cosmetic active ingredients could rapidly break down in chemical and photochemical process. Therefore, it has become a very important issue to encapsulate active ingredient for the stabilization. 7-Dehydrocholesterol (7-DHC), a precursor of vitamin $D_3$, has been shown to increase levels of protein and mRNA for heat shock protein in normal human epidermal keratinocytes. However, topical dermal application of 7-DHC is restricted due to its poor solubility and chemical unstability. In this study, 7-DHC was incorporated into nano-emulsion (NE), solid lipid nano-particle (SLN), and chitosan coated solid lipid nano-particle (CASLN), respectively. In order to prepare NE and SLN dispersion, high-pressure homogenization at temperature above the melting point of lipid was used Hydrogenated lecithin and polysorbate 60 were used as stabilizer for NE and SLN. CASLN was prepared by high speed homogenizing after adding chitosan solution to the SLN dispersion and showed positively charged particle properties. Decomposition rate of 7-DHC in NE, SLN and CASLN was studied as a function of time at different temperature. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies were performed to characterize state of lipid modification. It appeared that CASLN is the most effective to stabilize 7-DHC and may be used for a useful topical dermal delivery system.

• Child Health Nursing Research
• /
• v.8 no.2
• /
• pp.183-194
• /
• 2002

This study was conducted to obtain a basic information related to a more systematic safety education and measures against children's accidents by a descriptive survey with regard to accidents actually experienced by elementary schoolers, their perceived safety education activities and school facilities to their safety lives. The data was collected among 1,654 pupils, belonging to the 5th and 6th grades in Pusan from Nov. 20 to Dec. 1, 2000. The data was analyzed using SPSSWIN(7.5). The results were as follows ; 1. According to the perception by elementary schoolers, they received safety life instruction at school in most cases from teachers in charge of their own class (41.0％). Such safety education was provided often during formal classes(24.4％). Traffic guidance was given by parents, highest in frequency(67.3％). 2. Matters as most often treated during safety life instruction were safety knowledge or dangerous things(37.5％). A majority of notices of school safety instruction were presented sometimes(48.4％). Source of knowledge about safety lives included teacher (35.3％), parents(32.9％), TV and newspaper (29.9％). As a source of knowledge of emergency treatment, school nurses were accounted for 41.3％ that was highest. 3.Among the 1,654 students, 91.8％ experienced at least more than one case of safety accident. The most frequent type and cause of safety accident were wound(33.7％). and self-carelessness(38.4％) respectively. In most cases, the subject experienced such accident during a break time(32.2％) and at a playgrounds. Part of body as most often damaged by accidents were arms and legs, 25.4％ higher than any other sides problem solving measures against the accident were taken by school nurse in most cases, 44.8％ in percentage point. 4. Those students' perceived safety management of school facilities showed that they considered classroom facilities as most safe (61.6％), while playground facilities as least safe(42.8％). They also responded that the treatment of glass fragments or stones at playground is the most important item of safety management.

• Journal of Korea Water Resources Association
• /
• v.53 no.11
• /
• pp.1015-1024
• /
• 2020

Recently, water pollution accidents have continued to occur in pipelines such as red water Incheon and Seoul. In order to recognize this water quality problem, it is necessary to install a water quality sensor in an appropriate location and measure it in advance to detect or block the water supply to the water faucet of the shelter. However, there are limitations, such as maintenance costs, to installing multiple water meters in all pipelines. Therefore, this study proposed a methodology for determining and prioritizing the installation location of flow-based water quality sensor for the recognition of water quality problems in pipelines. We applied the proposed procedure to the pipe break scenario. The results of the determination of the location of the water quality sensor were presented by applying it to the pipe network that actually operates the emergency pipe in Korea. The result of the decision showed that in the event of abnormal situation caused by the destruction of individual pipes, the flow rate of the pipes around the aqueduct and the tank may change rapidly, resulting in water quality accidents caused by turbidity. In the future, it is expected that the water quality monitoring point selection method, such as establishing an external pipe operation plan for pipe cleaning, will utilize the procedure for determining the location of the water quality sensor according to the velocity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.423-446
• /
• 1993

Titanium and its alloys are finding increasing use in medical devices and dental implants. The strong selling point of titanium is its resistance to the highly corrosive body fluids in which an implant must survive. This corrosion resistance is due to a tenacious passive oxide or film which exists on the metal's surface and renders it passive. Potentiodynamic polarization measurement is one of the most commonly used electro-chemical methods that have been applied to measure corrosion rates. And the potentiodynamic polarization test supplies detailed information such as open circuit, rupture, and passivation potential. Furthermore, it indicates the passive range and sensitivity to pitting corrosion. This study was designed to compare the corrosion resistance of the commonly used dental implant materials such as CP Ti, Ti-6A1-4V, Co-Cr-Mo alloy, and 316L stainless steel. And the effects of galvanic couples between titanium and the dental alloys were assessed for their useful-ness-as. materials for superstructure. The working electrode is the specimen , the reference electrode is a saturated calomel electrode (SCE), and the counter electrode is made of carbon. In $N_2-saturated$ 0.9% NaCl solutions, the potential scanning was performed starting from -800mV (SCE) and the scan rate was 1 mV/sec. At least three different polarization measurements were carried out for each material on separate specimen. The galvanic corrosion measurements were conducted in the zero-shunt ammeter with an implant supraconstruction surface ratio of 1:1. The contact current density was recorded over a 24-hour period. The results were as follows : 1. In potential-time curve, all specimens became increasingly more noble after immersion in the test solution and reached between -70mV and 50mV (SCE) respectively after 12 hours. 2. The Ti and Ti alloy in the saline solution were most resistant to corrosion. They showed the typical passive behavior which was exhibited over the entire experimental range. Therefore no breakdown potentials were observed. 3. Comparing the rupture potentials, Ti and Ti alloy had the high(:st value (because their break-down potentials were not observed in this study potential range ) followed by Co-Cr-Mo alloy and stainless steel (316L). So , the corrosion resistance of titanium was cecellent, Co-Cr-Mo alloy slightly inferior and stainless steel (316L) much less. 4. The contact current density sinks faster than any other galvanic couple in the case of Ti/gold alloy. 5. Ag-Pd alloy coupled with Ti yielded high current density in the early stage. Furthermore, Ti became anodic. 6. Ti/Ni-Cr alloy showed a relatively high galvanic current and a tendency to increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.276-283
• /
• 2021

The capital structure of the shipping business, which is characterized by its capital intensity and extreme market volatility, is closely related to long-term stability. Research in this area has been conducted mostly in the form of deriving the determinants of capital structure from company-wise financial ratios. This research, on the other hand, has a different approach to the topic. It identifies the relationship between actual cash profit and loss and other variables - i.e. actual vessel prices, interest rates and leverage ratio - by employing historical simulation. The result demonstrates that the P anamax cash profit shows 0 (break-even point) when the debt weight reaches 64.38% (debt ratio 180.74%) and the Cape, 73.04% (debt ratio 270.92%). Additionally, the ships of different types show a divided pattern for the pre- and post-'Super Boom'. It indicates that the business area and the market cycle should be considered when a leverage strategy is established. This research benefits shipping companies set a rational leverage strategy as well as delivers a reasonable guideline to government authorities for the development of a sound policy on shipping finance.