• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.54-62
• /
• 2015

The Cities that recently developed have been applied to private network for establishing information communication network system. The local governments planning or pursuing U-City construction should also choose the private network in consideration of operation and maintenance. In viewpoint of agency operating u-City, it is necessary to integrate traditional and new network. However, there has been lack of guides to choose U-City network considering the economic analysis between private and leased network. This study analyzed the characteristics of private and leased network, and the cost-benefit by estimating the network cost and communication demand focused on U-services that are recently applied. This study purpose a guide for efficient U-City information network selected by estimating ROI(Return On Investment) and BEP(Break Even Point) for establishing private and leased network.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.39-47
• /
• 2014

PURPOSES : This study aimed to analyze economic effect of recycled aggregate production on job-site airport pavement. METHODS : The validation of site recycling for waste concrete as economic efficiency is analyzed through the case study of site recycling at an O airport pavement construction. The break-even point for the cost of site recycling was estimated according to two different waste concrete processing methods such as job-site recycling and processing on commission (or plant). RESULTS : Job-site recycling cost decreases as the use rate of job-site recycled concrete aggregate increases, or the amount of concrete waste increases, but transporting distance decreases. It was shown in an O airport case that as the use rate of job-site recycled concrete aggregate exceeds 61.4 %, the job-site recycling cost is cheaper than the processing cost on commission. CONCLUSIONS : The results of this study can utilize basic data of feasibility for site recycling of waste concrete on airport pavement construction.

• Journal of Biosystems Engineering
• /
• v.34 no.4
• /
• pp.220-227
• /
• 2009

In the process of oyster mushroom production, loading work of culture medium needs the most intensive labor power. Therefore, development of culture medium machine causes to reduce the manpower and cost. The main objective of this study is to develop the culture medium loading machine and investigate the optimal operation conditions and to evaluate the economic value of the machine. The results are summarized as follows: 1. Optimum transporting velocity of the conveyor was 0.61 m/s 2. Optimum speed of blower was 3183 rpm at the transporting velocity of 0.61 m/s with the loading quantity of 3.41 t/hr 3. Recommendable opening area ratio of pressure controller was 1/2 at the blower speed of 3183 rpm and the transporting velocity of 0.61 m/s 4. The break even point resulted in $240\;m^2$ of cultivating area compared to the method of with portable workbench, and $350\;m^2$ of cultivating area compared to the method of with a tractor and a truck.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.4
• /
• pp.65-74
• /
• 2018

The primary objective of this study is to develop a conceptual design of automated pothole patching machine that improves the conventional work in safety, quality, and productivity. For this, the following research works are conducted sequentially; 1)literature review, 2)selection of element technology for conceptual design, 3)deduction of work process and conceptual design, 4)life cycle cost analysis of the conceptual design. As a result, X-Y table telescopic manipulator, pothole patching end effector, realtime pothole recognizer, 3D pothole volume profiler, automated pothole patching machine controller are selected as core technologies. Furthermore, a conceptual design and working process of an automated pothole patching machine are developed based on the core technologies. According to the life cycle cost analysis result, the cost of the automated method was 38.3% less than that of the conventional method, and the economic efficiency was also superior(ROR 77.1%, Break-even Point 23.8month). It is expected that the application range and impact on the construction industry will be enormous due to the increasing trend of road maintenance market.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.2
• /
• pp.37-44
• /
• 2019

The primary objective of this study is to develop a prototype of all-in-one attachment-based PHC pile head cutting robot that improves the conventional work in safety, productivity, and quality. For this, the following research works are conducted sequentially; 1)literature review, 2)development of an all-in-one attachment-based PHC pile head cutting robot prototype, 3)performance evaluation of each device, 4)economic analysis of an automated method. As a result, PHC pile cutting level sensing device, PHC pile cutting device, PHC pile handling device are developed. Futhermore, working process of an automated method is developed based on result of performance evaluation. According to the economic analysis result, the cost of the automated method was 21.37% less than that of the conventional method, and the economic efficiency was also superior(ROR 215.44%, Break-even Point 5.52month). It is expected that conclusions for future improvements are used in the development of the all-in-one attachment-based PHC pile head cutting robot to practical use.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1367-1372
• /
• 2009

A proprietary device is adopted to break out the membrane of cell in the rigid polyurethane foam. As it is known, the membrane of cell is hardly tearing-off thoroughly in a mechanical way due to both its elastic characteristic and micro sized pores. In this study, a novel experimental approach is introduced to burst out all gases inside the cells of the rigid polyurethane foam by abrasively grinding micro-cells completely into fine powder. The biggest advantage of this approach is to be capable of releasing all gases out from the cell even in the micro pores. As clearly reflected from the repeatability, the accuracy of the result is highly improved and high confidence in the data sets as well. For the measurements of not only gas composition but partial pressure for each gas simultaneously as well, a precision gas mass spectrometer is used in-line directly to the abrasive grinding device. To control the starting point of the polyurethane foam, all samples were prepared on site in the laboratory. Manufactured time is one of the most critical factors in characterization of cell gas composition because it is known that one of gas composition, especially, carbon dioxide, is diffused out dramatically in a short period of time as soon as it is foamed.

• The Journal of Fisheries Business Administration
• /
• v.36 no.1 s.67
• /
• pp.121-138
• /
• 2005

This study was conducted to investigate the economic effect of the release of seed flounder to the central area of the West Sea, which was analyzed into both direct and indirect effects. The results showed that based on the data collected from partial area, the economic effect of flounder seed release reached 6.97 times, average catch proportion was 32.27$\%$, and recapture rate was 11.26$\%$, suggesting that economic effect was very high. In addition, it was observed that the recapture rate was greatly higher than 2.05$\%$, that of Break-Even-Point. It was noted that the increased catch by the release of seed flounder resulted in the increase in commission of sales and the increase in sports fishing. Another economic effect observed were diverse including the increase in income of fishing village, elevated spirit to proper management of fisheries resources, maintaining of willingness to live in fishing village through activation of local fishing village, prevention of illegal fishing including capture of juvenile fish, and the increase in the supply of sea food of high quality. It is emphasized that although the investigation was conducted in the same area, the results will vary by size at release, time at release and other factors. Finally, there is a need to expand species and area of study for more active economic analysis incorporating natural sciences.

• The Journal of Society for e-Business Studies
• /
• v.19 no.1
• /
• pp.1-14
• /
• 2014

This paper presents the development of a stock control system of POP system design based on RFID in SCM and its economic efficiency. A stock control system is proposed for 900MHz passive type RFID system. The RFID system is composed of a RFID reader and four antennas to read the tag IDs. A cost estimation model is adapted based on the total product profit by various tag prices. The result of the economic efficiency analysis can indicate any invested model for the automation system which have initial investment should be used. This solution indicates the limit of the break even point according to the input. And it can be concluded that the stock control can be developed by RFID readers and passive tags with directional arrangement of several antennas. Also, the economical evaluation model can be a decision method for company to adapt the new developed system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.261-271
• /
• 2006

The present study is aimed at evaluating the economic effectiveness of Abalone, haliotis discus hanai Releasing Project(ARP) conducted in the fishing ground owned by a fishing village in Ulsan, Korea. The results were summarized as follows: First, an average ratio of released abalones in the total landing after releasing is shown to be 85.0%. Second, the recapture rate of released abalones is 46.8%, exceeding the recapture rate of BEP(Break-Even-Point), 22.9%. Third, it is evaluated that total economic effectiveness of the ARP is 6.7-6.8 times, net effectiveness is 2.2-2.3 times, and the NPV(Net Present Value) discounted by a 8% interest rate is 474, 635 thousand wons, indicating the project is profitable. Considerable parts of the positive results on the ARP are based on some beneficial conditions, including the selection of favorable releasing sites, best self-regulation system of a fishing village for preservation of seaweed facilities and continued activities for protecting small abalones and their rearing. These results imply that the success of the ARP would be primarily dependent upon the selection of releasing site and effective management system after releasing.

• Journal of Forest and Environmental Science
• /
• v.35 no.3
• /
• pp.173-180
• /
• 2019

This study determined the economic impact of environment-friendly cultivation and the optimal cultivation area of Omija (Korean for Schisandra chinensis Baillon) for full-time farmers by analyzing the management performance of existing Omija cultivators. The study divided the target income into urban household income and Omija farm income, and estimate the optimal cultivation area by substituting the target profit from the cost-volume-profit analysis model. The optimum cultivation area was 1.4 ha for general cultivation, 1.08 ha for organic cultivation, and 1.18 ha for pesticide-free farming cultivation considering the average urban household income as the target, and 0.81 ha for general cultivation, 0.63 ha for organic cultivation, and 0.69 ha for pesticide-free farming, considering the average 2012 farm household income as the target. Therefore, the study reached conclusion that it is necessary to secure the price of Omija farm and stable support for income increase. Therefore, the support plan for income stabilization of Omija farm should be considered. Especially, the central government should provide various policies and financial support to help the optimal cultivation area of Omija Farm.