• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.274-277
• /
• 2004

The most important mode of subcritical crack growth is primary water stress corrosion crack, which was the reported mechanism from the root cause analysis of the crack in the bimetallic welds. Stress corrosion crack growth evaluations was carried out for several flaw shapes of both axial and circumferential flaws, using the steady-state stresses including residual stresses. This evaluation considered the possibility of additional flaws in the primary loops of nuclear power plant, even though no such flaws have been identified by Ultrasonic Test. Consequently, Results show that the predicted flaw sizes will determine acceptability for continued service and maintenance.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1540-1547
• /
• 2013

국가 에너지 소비의 25%를 차지하는 건물에너지의 저감과 귀농인구의 증가에 따른 저에너지 친환경 주택모델의 수요 충족을 위해 EnergyPlus를 사용하여 PV 시스템이 적용된 농어촌 주택 표준모델의 건물에너지요구량을 기반으로 경제성 분석을 하였다. 2가지 타입의 PV 시스템이 적용되었고 발전된 전력을 건물의 냉방기기와 전기기기, 그리고 난방기기에 사용하였다. 계산에 사용된 주택의 연간 건물에너지요구량은 난방이 냉방에 비해 7배 크게 나타났다. Case1과 Case2로 나누어 PV 시스템의 경제성분석을 실시한 결과, Case1은 냉난방 및 전기기기에 발전된 전력을 사용하고 판매하는 것이, Case2는 냉방과 전기기기에만 전력을 사용하고 전량 판매하는 것이 경제적으로 유리한 것으로 판단된다. 하지만, 향후 전력 판매가격과 가스가격이 변동되면 결과는 달라질 수 있다. 초기투자비용은 Case1이 약 13년, Case2는 약 11년이 지나면 회수되는 것으로 나타났다. Case2가 초기설치비용이 비싸지만 회수기간이 지나면 Case1보다 약 3배 더 많은 이익을 얻을 수 있어 수명연한인 25년 이상 사용 시 경제성 측면에서 유리할 것으로 판단된다.

• 대한조선학회논문집
• /
• 제57권3호
• /
• pp.124-132
• /
• 2020

The purpose of this paper is to establish the basic procedure and method for selection of preferred anti-fouling paint considering economic analysis according to ship's speed loss based on ISO 19030 that has been published in 2016 to prescribe practical methods for measuring changes in ship specific hull and propeller performance. In this study, six (6) anti-fouling paint products have been assumed for alternatives with each target maximum average speed loss and carried out comparison of the alternatives and sensitivity analysis in assumed conditions for selection of the preferred alternative.

• 수산경영론집
• /
• 제14권1호
• /
• pp.1-18
• /
• 1983

This study has examined the principle of rationalization as a guiding principle in fisheries management. Generally speaking, the guiding principle of business management is the principle of profitability which is oriented to the profit maximization, but it has been insisted by Dr, Mohri that the principle of profitability should be translated into the maximization of ratio of added value on gross capital, According to Dr. Durcker, added value (contributed value) can be used to analyze productivity only if the allocation of costs which together make up the figures is economically meaningful. Therefore, the rationalization of fisheries management can be measured as a result of economic allocation of costs, The analysis of economic allocation of costs divides into macro-allocation of costs and micro-allocation of costs. In fisheries management, the former makes use of the analysis of break-even point, and the latter analyzes the efficiency of individual cost respectively and the state of division of costs which allocate into above-the-line expenses of lay system and management's burden expenses. In macro-allocation of costs, it is advisable that fixed costs be converted into variable costs. This is characteristically possible in fisheries management, because wages belong to variable costs in fisheries management while they are regarde as fixed cost in the other industires. Because we could find that all costs would belong to above-the-line expenses, in micro-allocation analysis, the very costs which are directly related to fisherman's poduction activity should be classified into above-the-line expenses, and the other costs into management's burden expenses. This is a central problem in the rationalization of fisheries management.

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.95-101
• /
• 2006

Present chemical application system using a power sprayer has been a labor intensive, ineffective and shirking task in farming. Therefore, a small RF controlled (unmanned) helicopter was suggested to replace the conventional spray system. The aerial application using the unmanned helicopter has been already utilized in Japan, where total area applied up to 704,000 ha in 2005. In this article, the status and cost analysis on the unmanned agricultural helicopter were studied. The aerial application using the agricultural helicopter helps precise and timely spraying and reduces labor intensity and pollution. The field capacity of the helicopter was found to be 60-70 ha a day. The break even point was estimated near the operating area of 750 ha annum. The development of an agricultural helicopter was necessary for taking advantages of both technique and economy.

• 한국산학기술학회논문지
• /
• 제4권3호
• /
• pp.134-138
• /
• 2003

본 연구는 언어학의 학파를 떠나 주목받고 있는 논항변이의 현상을 통사 ㆍ 의미론적으로 분석하고자 하였다. 논항변이의 현상을 동사의 특성에 따라 분류한 Levin(1993)을 기초로 Dowty의 의미론적인 해석을 시도하였다. 통사적으로 동일한 구조를 보이는 문장에서 동사의 논항이 바뀌면 의미의 변화가 있는 경우가 연구의 초점이 되고 있다. 의미변화가 초래됨을 기초로 각 동사의 유형을 통사적으로 분류하는데 그치지 않고, 그 부류의 문장들의 의미가 어떠한 영향을 받게 되는가를 고찰하였다. 우선 논항변이 현상을 보이는 동사를 Touch형, Hit형 Cut형, 그리고 Break형 동사로 분류하고 각 동사가 보이는 논항변이 현상에 따라 Middle alternation, Body-part possessor Ascension, Conative Alternation에 각각 어떻게 나타나는지를 점검한다. 이러한 분류에 기초하여 각각의 alternation에 의미론적인 해석을 하고자 시도한 것이다.

• 한국환경복원기술학회지
• /
• 제17권6호
• /
• pp.29-37
• /
• 2014

The objective of this study is to estimate the cost and benefits of street trees for their planting types, specifically, single row, single row+bottom, double row, double row+bottom. Different planting types are compared and analyzed by using Net Present Value (NPV) and benefit-cost ratio (BCR). Existing data are collected from the literature reviews for the use of meta-analysis method for estimating cost and benefit. The elements for analyzing costs are management and planting costs, and benefits are air purification, energy saving and landscape view. The discount rate is applied at a minimum of 3% and a maximum of 5.5%. The unit used in this calculation is km/year. The result shows that the net benefit is highest in double row, followed by single row, double row+bottom, and single row+bottom. The BCR is the highest in double row, followed by single row, double row+bottom, and single row+bottom. The BCR reaches the break-even point from 9 to 17 years depending on the planting types.

• 한국BIM학회 논문집
• /
• 제5권1호
• /
• pp.54-62
• /
• 2015

The Cities that recently developed have been applied to private network for establishing information communication network system. The local governments planning or pursuing U-City construction should also choose the private network in consideration of operation and maintenance. In viewpoint of agency operating u-City, it is necessary to integrate traditional and new network. However, there has been lack of guides to choose U-City network considering the economic analysis between private and leased network. This study analyzed the characteristics of private and leased network, and the cost-benefit by estimating the network cost and communication demand focused on U-services that are recently applied. This study purpose a guide for efficient U-City information network selected by estimating ROI(Return On Investment) and BEP(Break Even Point) for establishing private and leased network.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.426-441
• /
• 2003

A reactor inlet header break experiment, B9401, performed in the RD-14M multi channel test facility was analyzed using RELAP5/MOD3.2 and RELAP5/CANDU[1]. The RELAP5 has been developed for the use in the analysis of the transient behavior of the pressurized water reactor. A recent study showed that the RELAP5 could be feasible even for the simulation of the thermal hydraulic behavior of CANDU reactors. However, some deficiencies in the prediction of fuel sheath temperature and transient behavior in athe headers were identified in the RELAP5 assessments. The RELAP5/CANDU has been developing to resolve the deficiencies in the RELAP5 and to improve the predictability of the thermal-hydraulic behaviors of the CANDU reactors. In the RELAP5/CANDU, critical heat flux model, horizontal flow regime map, heat transfer model in horizontal channel, etc. were modified or added to the RELAP5/MOD3.2. This study aims to identify the applicability of both codes, in particular, in the multi-channel simulation of the CANDU reactors. The RELAP5/MOD3.2 and the RELAP5/CANDU analyses demonstrate the code's capability to predict reasonably the major phenomena occurred during the transient. The thermal-hydraulic behaviors of both codes are almost identical, however, the RELAP5/CANDU predicts better the heater sheath temperature than the RELAP5/MOD3.2. Pressure differences between headers govern the flow characteristics through the heated sections, particularly after the ECI. In determining header pressure, there are many uncertainties arisen from the complicated effects including steady state pressure distribution. Therefore, it would be concluded that further works are required to reduce these uncertainties, and consequently predict appropriately thermal-hydraulic behaviors in the reactor coolant system during LOCA analyses.

• Safety and Health at Work
• /
• 제12권1호
• /
• pp.51-56
• /
• 2021

Background: Neck pain is a major public health problem among sewing machine operators working in textile factories. Even though the textile industries are growing in number in Ethiopia, but there is a dearth of published studies on the prevalence of neck pain. Therefore, this study was aimed to assess the prevalence and associated factors of neck pain among sewing machine operators of garment factories in Mekelle city. Method: An institutional-based cross-sectional study design was implemented among 297 sewing machine operators' working in garment factories in Mekelle city. A systematic random sampling technique was used. Data were collected through interviews and analyzed using Statistical Package for Social Science version 23. Finally, variables with 95% confidence interval (CI): p < 0.05 in the multivariate analysis were significantly declared. Results: Two hundred ninety-seven sewing machine operators were enrolled, with 98.7% response rates. In this study, the 12-month prevalence rate of neck pain was found to be 42.3% (95% CI: 36.6%-47.9%), and variables like such as break time [adjusted odds ratio (AOR): 5.888, 95% CI: (2.775-12.493)], working hours per day [AOR: 6.495, 95% CI: (2.216-19.038)], static posture [AOR: 4.487, 95% CI (1.640-12.275)], and repetitive activity [AOR: 4.519, 95% CI:(2.057-9.924)] were associated with neck pain. Conclusion: In this study, neck pain is a major public health problem. Continuous work without break time, working greater than 8 hours per day, sitting in the same position for greater than 2 hours, and high repetitive activities were found significantly associated with neck pain. Owners and governmental bodies need to focus on developing preventive strategies and safety guidelines.