• 제목/요약/키워드: Break efficiency

검색결과 188건 처리시간 0.025초

태안 시설원예단지의 온실 냉난방 부하 분석 (Analyses of Heating and Cooling load in Greenhouse of Protected Horticulture Complex in Taean)

  • 서원명;배용한;허해준;곽철순;이석건;이종원;윤용철
    • 한국농공학회논문집
    • /
    • 제51권6호
    • /
    • pp.45-52
    • /
    • 2009
  • This study was conducted in the process that the basic plan of the formation of the thermal energy complex in the Iwon reclaimed land of Taean was being made. Targeting for the large-sized greenhouse to be made in this area, it examined the cooling and heating load and the amount of ventilation, and also analyzed the economic efficiency of heating. The research results are as per the below: The minimum ambient temperature of this area was measured on January 7, 2001, which was $-18.7^{\circ}C$, and the maximum ambient temperature of this area was measured on July 24, 1994, which was $36.7^{\circ}C$. The maximum heating load was 39,011 MJ/h, but the date when the maximum heating load was not consistent with the date when the minimum temperature was measured. The maximum cooling load was 88,562MJ/h, It was approximately 2.3 times of the maximum heating load, which was measured at 14:00 hours on September 4, 2000. The maximum amount of ventilation heat was 138,639MJ/h. Assuming the rate of solar heat use as 10%, 20%, 50%, and 100%, the total sum of cost-benefit would be ₩-193,450,000, ₩-634,930,000, ₩-3,372,960,000, and ₩-9,850,420,000, respectively 20 years later. The break-even point of the geothermal heat pump would be about 4 years for 10% use, about 3 years for 20% or 50% use, and approximately 6 years for 100% use. It was found that 50% use would be most advantageous. In case two systems are combined, the break-even point will be 10 years, 8 years, and 11 years respectively.

Ad-hoc 네트워크 테스트 베드 구현에 관한 연구 (A Study on the Implement of Test Bed for Ad-hoc Networks)

  • 이흥재;가순모;최진규
    • 한국통신학회논문지
    • /
    • 제31권11A호
    • /
    • pp.1059-1067
    • /
    • 2006
  • AODV(Ad-hoc On-Demand Distance Vector) 라우팅 프로토콜은 Ad-hoc 네트워크에서 이동 노드를 사용할 수 있도록 제안된 라우팅 프로토콜이다. AODV 라우팅 프로토콜을 사용하는 Ad-hoc 네트워크에서 고속으로 이동하는 노드가 포함되어 있는 경우 항상 최적 경로를 확보할 수 없는 문제로 인하여 경로 단절과 전송 지연이 발생한다 따라서 본 논문에서는 고속으로 변화하는 네트워크의 토폴로지에서 항상 최적의 경로를 확보 할 수 있는 메커니즘을 통하여 경로의 단절과 전송 지연을 최소화할 수 있는 AODV를 기반으로 하는 라우팅 프로토콜을 제안하였으며 ns2 시뮬레이터를 이용하여 제안 프로토콜을 평가하였다. Ad-hoc 네트워크를 위한 여러 가지 기반 기술의 검증을 위하여 실제의 Ad-hoc 네트워크 테스트 베드를 구현하였다. 본 논문에서는 AODV 라우팅 프로토콜, NAT, Netfilter등의 Ad-hoc을 위한 소프트웨어 검증을 위한 많은 이벤트 메시지를 성능 저하 없이 동작시킬 수 있는 고성능의 임베디드 시스템을 설계 개발하였다. 개발된 하드웨어를 이용한 Ad-hoc 네트워크 테스트 베드에서 AODV 라우팅 프로토콜의 정상 동작과 기존 인터넷 망과의 연동을 확인하였다.

하이브리드형 파력발전시스템의 유입구 형상 연구 (A Study on Entrance Section of Hybrid Wave Power Generation System)

  • 오진석;장재희
    • 한국항해항만학회지
    • /
    • 제37권6호
    • /
    • pp.597-601
    • /
    • 2013
  • 최근 해양시설물용 파력발전시스템은 본래 기능과 연계한 하이브리드 형태로 많은 연구개발이 이루어지고 있다. 이 중 방파제에 설계된 진동 수주형 파력발전시스템의 경우, 기존의 방파제의 기능에 더불어 터빈을 통해 파랑에너지를 전기에너지로 변환하는 발전기능을 갖는다. 이러한 형태의 발전 시스템은 해수를 손실 없이 최대한 많이 유입되도록 하는 것이 중요하다. 본 논문에서는 유입구 형상에 따른 파력발전시스템의 출력 특성에 대해 기술하였다. 또한 일반적인 해양 구조물인 방파제에 부착된 진동수주형 웰즈터빈 모델을 시뮬레이션 하여 유입구 곡면 각도에 따라 변화하는 유입량과 해수속도 그리고 그에 따른 웰즈터빈의 출력을 측정하였다. 마지막으로 시뮬레이션 결과를 바탕으로 하여 에너지 변환 효율을 높이기 위한 유입구 형상을 제안하였다.

직립 기동 영구자석 동기전동기의 동특성 해석 (Dynamic Characteristic Analysis of Line-Start Permanent Magnet Synchronous Motor)

  • 김병국;조원영;이인재;문지우;김미정;임성환;조윤현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.185-187
    • /
    • 2006
  • The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor are described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor.

  • PDF

도심 굴착공사에서의 소음 저감방안 (Low-cost Method for Preventing Noise from Urban Excavation Construction)

  • 손기상
    • 한국안전학회지
    • /
    • 제17권3호
    • /
    • pp.90-95
    • /
    • 2002
  • Den have been many construction projects in urban n We have a lot of problems which have to be solved especially against residence complaints existing building damage due to construction worts. We sometimes have to pay a certain amount of cost to solve the above problem, not in planning. In addition to, we have to suffer from work delay due to confronting problem. Almost all of these are due to blasting work to break solid rock to be excavated. Therefore, this study is focused on finding out how to reduce noise more cheaply. Four cases(4) as cheaper but more effective way have been tested to find out which way of local fence will have better moise reduce function in a field site. Where five(5) large breakers are being operated. It is concluded that more form and shape of local movable panel than the site of panel can be influenced on noise reduce.

154kV 주변압기용 가스차단기(GCB) 소손에 따른 원인규명과 항구대책 분석 (A Study on the cause and permanent measures on trouble of the GCB for the Main Tr. of Voltage, 154kV)

  • 전규남;장문성;옥광석;남궁혁;안주훈;정재원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
    • /
    • pp.285-286
    • /
    • 2008
  • The Gas Circuit Breaker for the Main Transformer of voltage, 154kV at the ist Hapcheon hydraulic power station, break down by the falling of a thunderbolt from now, let's improve the efficiency on the maintenance of generating equipment by studying about the cause and the method for this problem.

  • PDF

표면침탄 열처리강의 초입자연삭 가공시 연삭성 평가 (Grindability Evaluation of Super-Abrasives for Surface Carburized and Heat Treated Materials)

  • 이용철;김경년;곽재섭
    • 한국정밀공학회지
    • /
    • 제20권11호
    • /
    • pp.55-63
    • /
    • 2003
  • In this study, an experimental research of grinding characteristics using super-abrasives for surface carburized and heat treated SCM415 materials, which were usually used to make a linear motion guide block and were comparatively hard-to-machine materials, was carried out. In order to conduct a high efficiency and a accuracy grinding of such materials, grinding processes using CBN (Cubic boron nitride) and 38P grinding wheels have been attempted on a surface grinding machine. The grindability according to each grinding conditions was evaluated by means of a grinding force, a surface roughness and a residual stress. The experimental methods and results were presented in this paper. And also, from a proposed truing method the CBN wheels that combined a copper and a break truer gave a full scope to the wheel's performance.

하이브리드 자동차의 EGR 밸브 오작동 시 엔진 성능에 미치는 영향 (A study on engine performance of EGR valve problem in Hybrid vehicles)

  • 송락현;조행묵
    • 에너지공학
    • /
    • 제24권3호
    • /
    • pp.34-39
    • /
    • 2015
  • Recently, Air pollution is gradually increasing which are coming from the exhaust of the ICE vehicles in the world. ICE vehicle exhaust gas and $CO_2$ are widely suspected of contributing to the called greenhouse effect, fueling fears of global warming. Therefore, many countries are striving to decrease the vehicle exhaust gas and have developed a variety of policies as air pollution regulation plans. To comply with the regulations, automotive industry has developed hybrid vehicles, which have features of both ICE vehicles and electric vehicles. Hybrid car is eco-friendly and has lowered exhausting gases and improved fuel efficiency. This research has been written to show that break down cases with EGR valve in hybrid cars, steadily increasing in use, and to help with on-site maintenance.

Wavelet 변환 방식을 이용한 인쇄물 평가에 관한 연구 (A study on print estimation using wavelet transformation method)

  • 김택준;조가람;구철희
    • 한국인쇄학회지
    • /
    • 제20권1호
    • /
    • pp.28-44
    • /
    • 2002
  • Wavelet transformation in image compression is to offer higher image compressibility and high-quality by quantization and entropy encoding. More image quality is good that reconstructed image by wavelet calculation than acquire cosine transform. Therefore, wavelet itself is function if it is wavelet's feature, in this function, do processing applying difference scale and resolution. That is, this is not that fixed resolution has been decided like existent compression way, when it regulated scale, damage goes in pixel and picture looks like break without giving damage entirely in reflex even if magnify or curtail Decoding. Therefore, this paper is in Image that using new wavelet application compression way research that see applies comparing In each image noted this time compressing step by step with circle image compression efficiency recognize. Also, estimated quality pass through by printing of compressed image, investigated compression ratio of most suitable that get print of high quality and elevation of transmission speed.

  • PDF

해외 궤간가변 시스템의 기술적 특성 비교 연구 (A Comparative Study of the Technical Characteristics of Variable-Gauge Systems)

  • 나희승;장승호;한준석
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 춘계학술대회 논문집
    • /
    • pp.645-651
    • /
    • 2004
  • For the connection of trans-continental railway network, it is critical to conquer the break-of-gauge problem at the borders in different countries. Up to now, the best solution seems to be the employ of the auto-changable gauge equipment. Countries, such as Russia, Japan are developing and commercializing auto-changable gauge equipment to maximize transport efficiency for the trans-continental network. The efforts to search a suitable logistical service are also underway. In this paper, technology and development trend of this equipment in several countries is indicated through inspecting and analyzing the historical and current situation of development, operating mechanism and technical problems. As the basic technology of auto-changeable gauge is not well developed in our country, the purpose of this study is to search an approach to fix the research direction, and find practical ways to international cooperation.

  • PDF