• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.538-541
• /
• 1996

The flow of the molten drop in the GMAW was observed to explain the mechanism of its formation and break-up process. Fluid flew analysis was made with the assumption that the electrode wire acts like fluid, and it is shown how the convection of the drop inside affects its flow, from the formation to the break-up of the drop. In later part, the process of the spray mode development at high current is shown, as well as the one of the globular mode, by the fluid flow analysis.

• Textile Coloration and Finishing
• /
• v.33 no.3
• /
• pp.120-130
• /
• 2021

The condition of covering process using thermoplastic polyetherester elastomeric fibers(TPEE) was established. Two types of core yarn(TPEE, Spandex) and one type of effect yarn(PET) were used as materials to confirm the change in physical properties of covering yarn under various covering conditions. In addition, the effects of the treatment temperature on the elongation at break of covering yarn after heat treatment was analyzed. Through this analysis, it was confirmed that the elastic recovery of TPEE which is used as the core yarn was increased with the draw ratio, but decreases when it exceeds 1:2.5. And the elongation at break of the covering yarn could be increased by increasing the twist per meter of it. Additionally, it was confirmed that the elastic recovery of TPEE which is used as a core yarn, could be increased by applying heat treatment.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.684-701
• /
• 2016

The Gaussian process model (GPM) is a flexible surrogate model that can be used for nonparametric regression for multivariate problems. A unique feature of the GPM is that a prediction variance is automatically provided with the regression function. In this paper, we estimate the safety margin of a nuclear power plant by performing regression on the output of best-estimate simulations of a large-break loss-of-coolant accident with sampling of safety system configuration, sequence timing, technical specifications, and thermal hydraulic parameter uncertainties. The key aspect of our approach is that the GPM regression is only performed on the dominant input variables, the safety injection flow rate and the delay time for AC powered pumps to start representing sequence timing uncertainty, providing a predictive model for the peak clad temperature during a reflood phase. Other uncertainties are interpreted as contributors to the measurement noise of the code output and are implicitly treated in the GPM in the noise variance term, providing local uncertainty bounds for the peak clad temperature. We discuss the applicability of the foregoing method to reduce the use of conservative assumptions in best estimate plus uncertainty (BEPU) and Level 1 probabilistic safety assessment (PSA) success criteria definitions while dealing with a large number of uncertainties.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1027-1033
• /
• 2007

In this research, the polishing pad for W CMP has been analyzed to understand stabilization of polishing performance. For stabilization of process, the polishing pad condition is one of important factors. The polishing pad plays a key role in polishing process, because it contact with reacted surface of wafer[1]. The physical property of pad surface is ruled by conditioning tool which makes roughness and profile of pad surface. Pad surface affects on polishing performance such as RR(Removal Rate) and uniformity in CMP. The stabilized pad surface has stable roughness. And its surface has high level of wettability which can increase the probability of abrasive adhesion on pad. The result of this research is that the reduction of break-in and dummy polishing process were achieved by artificial machining to make stable pad surface. In this research, urethane polishing pad which is named IC pad(Nitta-Haas Inc.) and has micro pore structure, is studied. Because, this type of pad is the most conventional type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5B
• /
• pp.429-439
• /
• 2009

When Catastrophic extreme flood occurs due to dam break, the response time for flood warning is much shorter than for natural floods. Numerical models can be powerful tools to predict behaviors in flood wave propagation and to provide the information about the flooded area, wave front arrival time and water depth and so on. But flood wave propagation due to dam break can be a process of difficult mathematical characterization since the flood wave includes discontinuous flow and dry bed propagation. Nevertheless, a lot of numerical models using finite volume method have been recently developed to simulate flood inundation due to dam break. As Finite volume methods are based on the integral form of the conservation equations, finite volume model can easily capture discontinuous flows and shock wave. In this study the numerical model using Riemann approximate solvers and finite volume method applied to the conservative form for two-dimensional shallow water equation was developed. The MUSCL scheme with surface gradient method for reconstruction of conservation variables in continuity and momentum equations is used in the predictor-corrector procedure and the scheme is second order accurate both in space and time. The developed finite volume model is applied to 2D partial dam break flows and dam break flows with triangular bump and validated by comparing numerical solution with laboratory measurements data and other researcher's data.

• Journal of ILASS-Korea
• /
• v.1 no.1
• /
• pp.63-75
• /
• 1996

The purpose of this study is to investigate the break-up characteristics by taking advantage of a two-phase coaxial nozzle. Air and water are utilized as working fluids and the mass ratio air/water has been controlled to characterize the atomization, diffusion and development of mixing process. By way of a photographic technique, conventional developing structures and diffusion angles have been analyzed systematically with variations of mass ratios. The turbulent flow components of the atomized particles were measured by a two channel LDV system and the data were treated by an on-lined measurement equipment. According to the photographic results the spreading angles decreased because the axial inertia moment was relatively higher than the lateral one with respect to the increase of mass ratio. It is found the jet flow diffuses linearly in a certain limit region while the atomizing characteristics, in terms of the distributions of particle diameters did not show particular differences. It may be expected that these fundamental results can be used as reference data in studying the atomization, breakup and diffusions.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.197-204
• /
• 2004

This study aims at the development of a cost management system in building interior projects. Renovation and remodeling is activated and expanded much more being compared with new building construction at present. After Interior project proceeding must get out of simple estimate and assumption, then its be needed a formal work process and computerized cost management. Proceeding a building interior project management was proceed in the office and the field. Cost break down, especially, depend on the field manger and used fiend managing money because its not checked by cost manager in office manger. For this study, cost factors are defined in terms of cost break-down interior works which consist of materials and labors. A data model for cost factors was developed, and a relational database is used to realize cost data management based upon this data model. Data input and output are achieved by internet from both of wired PC and mobile phone. This system can timely display a number of needed reports for cost management that identifies cash flow and predicts budget for cost break-down works in interior projects.

• Journal of architectural history
• /
• v.7 no.3 s.16
• /
• pp.137-149
• /
• 1998

The purpose of this study is to learn from a lesson of the historical fact, the Team 10's break away from the CIAM, which is selected as the most important event in the whole 20th century architecture by author as a historian. The CIAM, organized in 1928 by leading European architects in order to propose new architecture in the industrial era, expanded to the world, met almost annually with an idea of economic efficiency, new functional order, and industrial production for thirty years. Young architects had conflicted with old established group from 6th congress, and after 10th congress they met independently in 1959; the CIAM was disappeared and the Team 10 was born. Main issue of the break-away was human aspect. The Team 10 started from real man, concept of 'human contact', 'sense of community', and 'belonging' instead of abstract functional order. Although CIAM did not suggest inhumane architecture, their biological criteria with sunlight, air, sufficient site became physical determinism. Critique against the Team 10, unsuccess for making humane architecture leads to underestimation like a generational hegemony struggle. However, architect is not specialist of life but form. Historical reevaluation for Team 10 should be that they are the first group to raise an human issue in architecture. Success or not to solve the problem belongs to another domain. After 1960, modern architecture was attacked from the common people, not clients but 'users'. Academic circle tried to solve the problem with behavioral approach through a clear process, 'design method' and with phenomenological approach on real human experience. However practice became reactionary tendency, to make form a little complex, they became post-modern and deconstruction form. Failure of the Team 10's form proved that a complex form does not necessarily make a good life of people. In the Korean historic situation of colony ruling, confusion of liberation, and the War, we did not know the existence of both CIAM and Team 10. After 1970s' economic development, we have just copied Western form from Modern via Post-Modern to Deconstruction. If we make architecture people mattered, we should start from the basic, learning from the Team's break-away, instead of copying.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.491-492
• /
• 2006

The horizontal high energy rotor ball mill ($Simoloyer^{(R)}$) is used to break and activate dry solids. It is used for dry-milling and in the vertical mount for wet-milling in leaching processes. Technical electric arc furnace (EAF) dust with high contents of zinc oxide, zinc ferrite and magnetite is efficiently separated by ambient temperature leaching. The process shows promise for industrial application

• 보존과학연구
• /
• s.6
• /
• pp.48-57
• /
• 1985

This report described the corrosion structure of excavated iron artifacts in terms of simple model based on the knowledge of the corrosion process. (Fig.1)(Table 1,2)In storing the objects, there are basically three ways in which they either break in wedges, flakes and dish-shaped flakes. Completely mineralized objects or those with only a small iron core tend to break into wedges and more solid objects either split small dish-shaped flakes or large flat ones.(Fig. 2,3,4)There are two ways, therefore, to prevent this from happening. One is to keep the artifacts rigorously dried in Silica-gel, never allowing the relative humidity to rise. This is feasible which the artifacts are in store but causes great difficulty if they are wanted for museum display. Because they still contain $ FeCl _2$ they are always at risk ; they contain the seeds of their own destruction. The other alternative is to use of washing process to dissolve out the $ FeCl _2$. In this connection, many different methods to stabilize the artifact have been employed; boiling iron in frequent changes of water, soaking in Na-sesquicarbonate solution, soaking in alkaline Na-sulphite solution. In this report, introduced the alkaline sulphite method by the N.A. North and C.Pearson.Finally, Let me extend my thanks to Ancient Monument Lab., Museum of London Conservation Lab., British Museum Conservation Div. and National Maritime Museum Conservation Lab. who have helped me and made many valuable suggestions.