• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1C
• /
• pp.34-42
• /
• 2007

The sphere decoder (SD) has recently been proposed to perform maximum likelihood (ML) decoding for multi-input multi-output systems. Employing a 'breadth-first' searching algorithm for closet points in a lattice, we propose a novel ML decoding scheme for multi-input multi-output systems. Simulation results show that the proposed scheme has the same bit error rate performance as the conventional ML decoders while allowing significantly lower computational burden than the SD.

• Korea Trade Review
• /
• v.44 no.3
• /
• pp.73-84
• /
• 2019

This study focuses on previous research that explored the external knowledge reflecting the characteristics of SMEs and that should be considered because of the limited capacity of SMEs. This study examines the effects of open innovation and SMEs on export performance, focuses on government support as a way to supplement the limited capacity of SMEs, and analyzes the moderating effects of government support. An examination of 1,358 samples revealed that the breadth of external knowledge, depth of external knowledge, and government support had a significant impact on the export performance of SMEs. The effect of exploration of external knowledge (breadth and depth) of SMEs on the export performance of SMEs is significant both in breadth and depth when government support is provided, but only depth is significant when there is no government support.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.153-160
• /
• 2013

This study was conducted to investigate the effect of ecological factors affecting Pinus densiflora forest distribution associated with climate change in the future. Ecological niche is used as a method to quantify the position occupied in biological communities, space, influence and all ecological factors. Ecological niche breadth was analyzed on meteorological and growth factors of P. densiflora. Nine sites (i.e., Gangneung, Jeongseon, Pyeongchang, Hamyang, Bonghwa, Yeongyang, Uljin, Uiseong and Boseong) were selected to set $20m{\times}20m$ quadrat from September to October 2010. The height, DBH, clearlength, crown width and basal area were measured at each quadrat and used as growth factors. In addition, the measured values from the closest weather stations of each survey area of the maximum, mean and minimum temperature, humidity and precipitation were used as meteorological factors. The ecological niche breadth of the five meteorological factors except humidity was low. It is considered that precipitation could effect on the distribution of P. densiflora forest. In particular, maximum temperature showed low ecological niche breadth less than 0.4 in most of the survey areas. However, the ecological niche breadth of the five growth factors was high in all survey areas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.5
• /
• pp.583-590
• /
• 2018

The objective of this study is to present a resistance performance map developed using the dimension parameters of a bilge keel appendage attached to a fishing vessel using CFD. The dimension parameters consist of three length and breadth measures of a bilge keel appendage from nine selected cases. The size of a bilge keel attached to an existing ship should be 90 % of the ship length and 5 % of the ship breadth. In this study, bilge keels with a length of 63 %, 77 % and 90 % and a breadth of 5 %, 7 % and 9 % were considered based on ship length and breadth. The effective power in each of the nine cases was predicted using CFD. Based on results from an existing ship, effective power in the case with the shortest length and longest breath was reduced by 0.3 %. The case with the longest length and breadth showed an increase in effective power of 1.7 %. The case with the shortest length and breadth showed a decrease in effective power of 2.3 %. The proposed map can be utilized to select dimensions according to the sailing and work patterns of fishing vessels from the perspective of resistance performance.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.379-402
• /
• 2022

The purpose of this study was to verify the effectiveness of the employee metacognition and it's positive effect on employee agility. Also it aims to investigate the mechanism through the cascading multi-mediating effect through the role breadth self-efficacy and learning agility in such a relationship. In order to solve the common-method bias, independent and dependent variables were measured with time lag, and the relationship between variables was clearly verified by applying the position and the length of time worked with the supervisor as control variables. In testing the hypothesis, 478 questionnaires collected from whom worked at the company has more than 300 office workers in various industries were analyzed. As the result, firstly metacognition had a significant positive(+) effect on employee agility. Second, role breadth self-efficacy was found to positively mediate the relationship between metacognition and employee agility. Third, learning agility was found to mediate metacognition and employee agility positively(+). Fourth, metacognition serially mediates role breadth self-efficacy and learning agility, and the positive(+) effect on employee agility was verified. In addition, metacognition had a greater effect on member agility when passing through role breadth self-efficacy and learning agility rather than the direct effect on employee agility.

• Bulletin of the Korean Mathematical Society
• /
• v.38 no.4
• /
• pp.735-740
• /
• 2001

Let K be a convex body of constant relative breadth and let $K^*$ be its polar dual with respect to the Euclidean unit circle. In this paper we obtain the lower bound for the volume of the pedal body $PK^*P $K^{*}$ of K^*.$ Using this, we also obtain the lower bound for the volume product V$(PK^*)$V(PK) for planar bodies.s.

• Journal of the Korean Home Economics Association
• /
• v.43 no.10 s.212
• /
• pp.179-190
• /
• 2005

The purpose of this study was to apply the three dimensional Replica method to the fabrication of dress forms of plus-sized women to attain proper ease through draping and based on the ease to develop good torso patterns with superior fit. The results were as follows. The physical characteristics of the dress forms of plus-sized women were divided into two: Types I and 11. The proper ease was calculated through draping using dummies of each somatotype and appropriate torso patterns were developed. The differences of the types for each pattern were as follows. The bust girth ease of Type II was 6cm as for Type I. As for the bust breadth 1.0cm was added to the anterior chest width, the armpit width was the actual measurement plus 0.5cm, and the back breadth was the posterior chest width plus 2.5cm. The bust breadth was smaller and the back breadth was bigger that those of Type I after improving the bust and back fit. The bust of Type I protrudes outwards relatively and so the shoulder dart of front-side of Type I was 1.2cm bigger than that of Type II which improved the bust region fit. Considering the characteristics of the protruding abdominal region the front- side waistline of type II was assigned W/4+3.5cm and the back-side waistline W/4cm, so that the sidelines divided the front and back properly. It was drafted so that the center-front became diagonal, thereby improving the middle-hip girth fit.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.574-582
• /
• 2013

This study categorizes and analyzes hand types based on 2-Dimensional measurements of women in their 60-80's in order to establish initial data that can help develop a well-fitted glove and hand protector for elderly women. A total of 22 measurement items were selected to provide information about Size Korea (2010) 3D hand measurements. Participants in the study were 353 elderly women over the age of 60. Subjects were divided into two age groups (60's and over 70's). Statistical tests (such as Descriptive Analysis and T-test) analyzed the data and ascertained the age differences. A factor analysis and cluster analysis were conducted to classify elderly women hand types. The disparities between 20-30's and over 60's age groups were compared by T-test with the SPSS 20 program for Windows. The results in this study are follows: The hand shapes for elderly women were divided into 3 groups. Elderly women's Hand Type A is average length and the medium breadth hand type. Type B is the biggest length and breadth, Type C is the smallest length and breadth hand type. There were significant differences in the 20-30's and over 60's age groups for most hand length and breadth items. In addition, the mean measurement value of the length items decreased as the age increased; however, the diversity of items increased, so that it became shorter and wider. Further study should include the classification of hand shape dimensions for each figure type of sizing gloves for elderly women. We expect hand types to be applicable to the manufacture of gloves for elderly women.

• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.3-10
• /
• 1995

This study focused on the reconstructional point of Shinan ship-wreck that was excavated between $1976\~1984$. The wreck, which might be sunk in the beginning of the 14th century, is regarded as a vessel of Yuan dynasty, China. This paper tried to find out some structural characteristics and principal dimensions for restoration. The Shinan shipwreck's structural characteristics are summarized as follow, 1) The Shinan shipwreck is formed V-shaped cross section with bar keel, 2) The vessel is divided 8 holds by 7 bulkheads. 3) The ship has flat type stem and transome stern. 4) A rabbeted clinker -built is basically adopted on planking joint. 5) A wooden sheathing, which means a sort of protecting board against marine insects, is covered outside of the main hull, 6) For making an watertight structure, oakum and lime mixtured t'ung-oil are used along the seam of planking and bulkhead. 7) A V-shaped deep water-way exists at both deck side. 8) The shipwreck is believed to have 2 masts at least. 9) The shiptimbers are classified as Chinese Red Pine(Pinus Massonina) which is mainly grown in the southern part of China. Considering as mentioned above the structural characteristics, Shinan ship-wreck could be classified as Chinese Fu-chuan type(복선형) of sea-going ship. The Shinan ship's principal dimensions which are calculated on the basis of Chinese traditional shipbuilding custom, are as follow, Length overall(L.O.A). : 34.80m Length water line(L.W.L) : 24.90m Breadth(B.max.) : 11m Breadth(B) : 10m Depth at keel line(H) : 3.75m Draft(D). : 3.15m Freeboard(F) : 0.65m Ratio, length/breadth(L/B). : 2.26 Ration, breadth/depth(B/D) : 3.5 Height of stem : 7m Height of stern : 10m Displacement : ab.340ton.

• Journal of the Korean Home Economics Association
• /
• v.37 no.11
• /
• pp.49-58
• /
• 1999

This study is to develop the well-fit brassieres by observing the changes in the breast sizes and shapes, the surface area of the breast through the arm movements of 3 types (0$^{\circ}$ , 90$^{\circ}$ and 180$^{\circ}$) in vortical motion. The 11 elementary girls who are aged 12 participated in this experiment. To obtain the measures regarding the surface area of the breast, replicas are made at each motion. The results of this study are as fellows: 1. The changes in the breast sizes and shapes at each motion By increasing the motions of the arm movement, the following measure items are inclined to decrease: Shoulder length, Upper blast girth, Bust girth, Under bust girth, Upper bust depth, Bust depth, Under bust depth, Nipple to nipple breadth, Horizontal distance of bust, Horizontal length of the cup, Bust height, Cup size. By increasing the motions of the arm movement, the fellowing measure items are inclined to increase: Center point of shoulder~B.p., Shoulder point~B.p., Center point of shoulder~armpit, Upper Bust breadth, Bust breadth, Under bust breadth, Vertical distance of Bust. 2. The changes in the surface area of breast at each motion By making the replica to observe changes in the surface area, which are sectioned to 4 parts(area 1 to area 4), and volume of breast at each motion, the results are as follows: At 0$^{\circ}$and 180$^{\circ}$, the sizes of each part are ordered as the following: area2>area1>area4> area3. At 90$^{\circ}$, the sizes of each part are ordered as the following: area2>area1>area3>area4. Through these orders, it is found that the upper and inside part of the breast huts the inclination to increase so along as the motions of the arm movement increase. Also, the total surface area increases so long as the motions of the arm movement increase. As a reset of the F-test on the changes in the each surface areas, the surface area by arm movements, the significant differences among the each surface areas are found.