• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.847-857
• /
• 2015

The ratio of small-breasted women occupies over 20% among Korean women in their twenties. However, the commercial brassieres for the small-breasted women were not fitted well to their breast shapes. In this research, the various commercial mold brasseries for small-breasted women were evaluated through the wearing test and the analysis of 3D images which were scanned from their torsos wearing the brassieres. In addition, professional panels performed the appearance evaluation based on the 2D front and side images captured from 3D images taken by 3D measurement systems. As the results, we found that small-breasted women preferred a 3/4 cup brassiere, of which volume is concentrated in the lower cup. The most preferred brassiere in wearing state shows that the characteristic angle between the chest and the upper cup is about 167 degrees, which is smaller than those of another brassieres, and that the ratio of the radius of curvature of the nipple part to that of the lower cup was about 0.78. These results provide important implications regarding the design of mold brassieres for small-breasted women in spite of the fact that these results represent the selected set of commercial brassieres. Therefore, further studies are highly demanded for the most suitable design information of mold cup for small-breasted women.

• Journal of the Korean Society of Costume
• /
• v.50 no.3
• /
• pp.73-86
• /
• 2000

This study is to develop the well-fit brassieres by wearing test of available brassieres for girls . The 11 elementary school girls aged 12 participated in the wearing test. The test procedure consisted of a rating on fit and performance according to brassiere types, a try on test of 3 types of brassiere and a sensory test on fit. The results of this study are as follows ; 1. The results of fit rating on different brassieres. Compared among brassiere types, tank top type proved the most effective, from a viewpoint of wearing effects. All types of brassiere performed well in bust up effect. Especially tank top type brassiere showed the best of them. 2. The results of the sensory test and comparative test. With regard to wear comfort, most of the subject assessed tank top brassiere to be the most comfortable . As for freedom of movement, it is disclosed that the subjects prefer tank top brassiere. As a result, brassiere for girls strongly require size adjustment, physical and psychological comfort through full overage of breast area.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.3
• /
• pp.452-466
• /
• 1996

The purpose of this study is to proviede basic data for designing sports-brassiere by a questionnaire survey about sports-brassieres preferences and physiological wearing test. The results of the survey and the physiological wearing tests on sports-brassieres are as follow; 1. According to the survey, dissatisfied factors on the sports-brassiere are "drooping and vibrating of the breasts". Preferable factors are supporting breasts by stretch and seldom changing its position by motion. The bigger cup-size and more hemispherical-type causes more discontent than flat-type. 2. The shape of breasts is oval, on what ground, horizontal line is longer than vertical. For the cross section of bust line, shirts type.brassiere is more gently curved than cup-brassiere. 3. The feeling of wearing comfort is correlated with bust.up, shield, close adhesion. The vibration of breasts is correlated with covering urea and close adhesion, and the changing band's position by movement, close adhesion. Too much covering area or strain are in inverse correlation of the comfort. 4. The rate of prevention of vibration is 75~80% on superior sports-brassieres, which has broad covering area and excellent close adhesion. adhesion.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.5
• /
• pp.635-644
• /
• 1999

The purpose of this study is to investigate the visual sensibilities of brassiere design. Brassieres were divided into three types according to connection of a cup and a strap. In each type Lace was used where the part of the cup divided by lines which were constructed such as a mold horizontal a vertical a mixed and an oblique design. As a result 39 brassieres were obtained. The experiment has been done for the 39 brassieres with 17 semantic differential bi-polar scales. The subjects were 60 female students majoring in clothing and textiles, The data was analyzed using the statistical SPSS package. The major findings of this research were as follows. 1. As a results of the factor analysis, 3 factors(Attractiveness Appearance. Cuteness) were found to be constructing factors for brassiere image. 2. There were significant differences in the visual evaluation of brassiere design especially in the change of lace. 3. As a result of the regression analysis the images affecting preferences were pretty fascinating natural appropriate sexy and clean.

• The Research Journal of the Costume Culture
• /
• v.20 no.5
• /
• pp.621-634
• /
• 2012

With comparative analysis of running-type brassieres on the market about suitability for middle-aged women, this study is to provide basic data of running-type brassieres' pattern which is highly suitable. In the pursuit of this purpose, this study carried out wearing experiment targeting 3 middle-aged women with normal body shape which is 85B of chest circumference. The result is as follows. The significant difference was recognized in the breast. The products were rated in order of C>A>B>D, E, F, G>H by the observers, and C>B>D>A>F>E=G>H by the subjects. The significant difference was recognized in the armhole area. The products were ranked in the order of C, D>B, G, E>A, F, H by the observes and D, C>B>G>F>A>H by the subjects. The significant difference was also recognized in 6 categories(14~19) for the torso. According to the overall average values, the products were rated in the order of B, C, D>A, D, F, G by the observers and B=D>C>H>F>G>A>E by the subjects. The overall evaluation exhibited the significant difference. The products were ranked in the order of D>C>E>B>H>A>G>F by both observers and subjects. Therefore it was confirmed that the product D was appropriate in general. To conclude of comparative analysis about 8 kinds of running-type brassieres on the market, the average values of the product C and D in all categories had high marks for each category. The product C was comfortable and capable of covering the breast well, however, a gap was formed in outside-up part. The product D, made from lacy fabric, was very comfortable and well-fitted but there was inconsistency between the mold-cup and the breast shape.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.719-730
• /
• 2001

The purpose of this study is to develop the basic patterns of adult womens brassiere therewith, provide for some basic data useful to the brassiere manufacturing which are both functional and fitting. For this purpose, 220 adults women(aged between 20 and 59) were sampled to be measured for their body sizes and tested for their brassiere wearing. The collected data were statistically processed using the SAS 6.12 for Means, Standard Deviation, etc. The results of this study can be summarized as follows; 1. In order to develop the basic patterns of adult womens brassieres, 75A size was selected out of 12 size combination(3 women per 75A size) and then, their brassiere fitting was tested. As a result, the fronts of the basic patterns were found to have such problems as undone front center, poor levelling of upper cups bottom line or lower cups top line, poor shape of upper cups outside top line and shoulder strip position. On the other hand, n the rear side of the basic patterns, the central part of the wing was slightly lifted, while the wing width and straps interval did not befit the full-cup brassiere. The result of this first brassiere fitting test showed that the functionality and aesthetics of the basic pattern brassieres were more or less satisfactory, and thus, the problems were address for the second test. In the second test, the aesthetics, breast-shaping effect and functionality of the basic pattern brassieres were much improved. 2. The basic patterns of adult womens brassieres were characterized by a round cup wired as well as a full cup embracing the entire breasts. Each basic pattern which consisted of upper and lower cups was shaped \"straight(-)\". The basic sizes adopted at the first design stage (see fig. 1-2) was 75A of which was designed as upper foundation basic pattern. At the second stage, the upper body foundation pattern were used to design lower cup, upper cup, front panel and wing in their order.(see fig. 3-5, fig. 8)5, fig. 8)

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• Journal of Fashion Business
• /
• v.10 no.1
• /
• pp.132-147
• /
• 2006

The purpose of this study is to provide for the basic data useful to the effective production and marketing of the foundation garment befitting adult women's shapes and preferences, and thereby, help them improve their apparel life. For this purpose, 563 Korean women aged between 20-59 were sampled to survey their recognition and actual wearing condition of foundation garments and positively identify the factors affecting the practices and thereupon, determine the correlations among them by age group. The raw data of this study is processed by SPSS Win(10.1) and analyzed by using frequency, percentage, $x^2$-test, ANOVA, Duncan-test. The most of adult women were aware of their foundation size and the absolute majority of them wore brassieres, while a half of them used the girdles. The adult women had 5.7 Brassieres and 2.2 Girdles. The use of the foundation depended much on user's age or seasons. They had begun to wear Brassieres at their age of 15 on an average and Girdle around their age of 19 depending their individual needs. It has been found through this study that adult women's is actual wearing condition of foundation garments differ by age group, which may well suggest that foundation production need to consideration this age-wise practices when setting up their foundation production and marketing strategies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.15 no.3 s.39
• /
• pp.229-238
• /
• 1991

The object of this study is to develope an improved version of brassiere with better fit and improved performance by conducting a try-on test on 6 types of revised brassieres (constructed on above basis). The study procedures consisted of a try-on test of experimentally constructed brassieres and a sensory test on fit. The results of experimentally constructed brassiere trial are as follows. 1. The sizes showing performance effects due to different types of experimentally construct- ed brassieres were bust length, bust height, under bust curve length, vertical and horizontal bust diamenter, upper-lower bust slope angle (direct measurement, parallel standard, upper torso tilt rate), side bust slope angle and top bust slope angle. 2. Concerning the changes in lower cup interior, elastic materials and wider portions perfor-med better in bust up effect. 3. No effects due to different shoulder strap positions were observed, but combined with lower cup interior changes the side types proved more effective than the standard types.