• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.407-417
• /
• 2003

The purpose of this study is to develop designs and patterns of a functional brassiere. For this purpose, women who have protruding and drooping breasts with 75B for their brassiere size were sampled. The fitting test for the fitness and function of test brassiere and control brassiere were carried out twice and compared the results from the both in terms of front, rear and side looks. The results of this study can be summarized as follows; 1. The results from measuring the level of sag and spread, and volume and protrusion of breasts shows that there are some distinctive differences in the measurements before and after wearing the test brassiere and the test brassiere is proved to be very effective in correcting breasts' shapes. 2. Front look: Since the two front cutting lines of the test brassiere served to have the curved main part pressing against the breasts, it could support breasts to more than satisfactory level. In addition, upperline panel and side panels of the test brassiere were found to have the upperline of the upper cup pressed against the breasts and at the same time it pressed and gathered the flab around upper part of the breasts and armpits that helped to rearrange the shape of the breasts. It is also proved that the two-pieced test brassier was found to be more functional in supporting the lower cup of the breasts. 3. Rear look: The test brassier was made up of two wide U-shaped wings with 2.5cm tape on its lower sides. Each wing has 4 lines and 3 hems (5.5cm). For this reason, the test brassiere was tighter and better fitted on its back. 4. Side look and entire look: The wings of the test brassiere might look wider than that of the control brassier which has conventional straight-shaped wings, but it was analyzed that the test brassiere held the upper and lower sides of the wings more effectively to be more pressed against the breast. Therefore, the test brassiere scored higher in terms of adjusting to body movements, while the control brassiere looked better in overall terms. 5. The functional brassier fur protruding and drooping breasts developed from the experiments of this study is a full side stretch brassiere which covers the entire breasts satisfactorily. The pattern drafting methods are suggested in to .

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.502-517
• /
• 2008

The purpose of the study lies in the measurements of breast shapes and upper body types for the women in their 40's, with the use of 3D measurement system, and in the presentation of brassiere patterns fit for their body types. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The findings of the study indicated that the evaluation of experiment brassieres was excellent in every item, and he significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup art. The pattern comparison showed the differences in the parts of total cup angle, cup circumference length, lower cup height, wing length, and wing angle.

• Fashion & Textile Research Journal
• /
• v.21 no.4
• /
• pp.480-487
• /
• 2019

This study used 3D technology to develop a multi-functional sports brassiere with increased comfort and fit that can be worn as a base layer during exercise or as underwear. A 75A size industrial lingerie figure was used to develop a standard pattern. 3D tools for scanning and pattern making, such as Vivid 910, Geomagic Design X, 2C-AN and Yuka CAD were used. The sports brassiere was designed as a tank top style with dual structure and linings attached to a pad utilized with a sport brassiere mold cup. 3D outer and lining's pattern was differently developed in consideration of the body's curvature with pad's shape and structure. Shoulder and neck part reduction rates were adjusted to increase the neck areas fit that considered the nude pattern's structure due to uncomfortableness felt by wearers who were uncomfortable with the neck areas fit on existing brand products. The reduction rate was also set differently on each part. For example, the reduction rate on outer side panel was set strongly to increase the breast's volume. Two products, developed by a 3D sports brassiere and previously released product, were worn on 8 subjects in their 20's to evaluate fit, comfort, and purchase preferences. The evaluation proved that newly developed 3D products were superior to comparative products. The results of the clothing pressure measurement indicate that the newly developed sports brassiere's front part had less pressure on upper bust and shoulder areas compared to comparative products as well as showed less pressure on the back side, which shows improved wearing comfort compared to comparative products.

• The Korean Journal of Community Living Science
• /
• v.28 no.1
• /
• pp.69-79
• /
• 2017

The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.215-227
• /
• 2019

This study develops a post-operative brassiere suitable for changed breast shapes and the characteristics of breast augmentation patients. Six subjects who experienced breast augmentation surgery with a cup size of C or D cup participated in the wearing test. We conducted a wearing test to evaluate the superiority of the developed post-operative bra. As a result, the evaluation of the developed bra was excellent in the outer cup, outer circle of breast front gore, shoulder straps and the wing pressures. Second the satisfaction of the developed brassiere was high in the front center part, and in the evaluation of wearing satisfaction of the subjects; in addition, the degree of close contact with the cup, flexibility, touch, and overall evaluation. The satisfaction of the developed bra was also higher than a commercial bra. Third, the developed bra proved superior in the adaptability test, such as prevention of breast shaking, prevention of bra and breast separation during movements, and ease of body movement.

• Journal of Fashion Business
• /
• v.20 no.4
• /
• pp.189-206
• /
• 2016

A breast model was for the human body was devised by studying a body scan and human body index of a desirable breast type. Thus, when manufacturing various 3D models, these results can accordingly become a fundamental basis for realizing a desirable breast model. This study aims to provide a basic data for designing the cup patterns of brassieres in order to improve the function and wearing comfort. The comfort of three kinds of brassieres were compared: one manufactured by the actual measured size; another manufactured as per the ratio of desirable upper and lower breast lengths; and the third manufactured by the 3D model attained by the desirable human body ratio. In this study, we suggest a process for realizing the desirable breast model using the ratio of bust breadth and waist front length, which are the components for deciding the appropriate position and size of breast, and which are easy to measure. The ideal breast shape is an equilateral triangle formed by connecting the nipple with the center of the clavicle. After deciding the interval between the nipples, this value can be used to configure the locations of nipples by drawing a tangent, with equal length, from the anterior neck point (which is the center of clavicle) to the nipple. Also, since inside points of breast do not exist, the outer point of breast, upper point of breast, and below point of breast on the same plane, and the depths from the nipple point to the respective points, are applied to simulate a 3D image, by modifications along the x, y, and z axes. Depending on the type of breast, the length from the center of shoulder to the nipple, the diameter of breast, upper length of breast, and the position of nipple, are different. In conical or protruding breast, the wearing sensation is better when the nipple point of brassiere was lifted, by modifying the upper and lower lengths of breast. Considering the wearing sensation and function of a brassiere, it was better to leave the wearer's size as it is and use a pad within the same cup, rather than increase the basal area of the breast in order to increase the volume.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.4
• /
• pp.673-685
• /
• 2010

This study evaluates the fitness of brassieres through size measurement, comparative pattern analysis, cross section map analysis, 3-D shape analysis number, and fitness evaluation with a focus on domestic and overseas brands. Experimental brassieres were selected as mold brassieres of 3/4 cup in 75A size that is considered a popular design. Brands of selected brassiere were 2 domestic brands (A, B), 1 licensed brand (C), and 2 overseas brands (D, E). Subjects were 8 women in their early 20's. Data were analyzed by descriptive statistics, analysis of variance, reliability analysis, and factor analysis. The results were as follows; the size and pattern of brassieres showed a difference by each brand even though brassieres are the same design. In the wearing effect of brassieres, overseas brand brassieres played a major role in the breast-up effect, but they were not appropriate for the somatotype of Korean women. Domestic brand brassieres showed the volume-up effect, that was confirmed by the increasing bust circumference, bust depth when subjects wore it. In addition, the licensed brand brassieres showed the correction effect of body shape. Therefore, when purchasing a brassiere, the most important condition is to consider the individual characteristics of the somatotype. The results of factor analysis through a functional evaluation show that wearing satisfaction, size satisfaction, and the position of the bust point were important factors for fitness satisfaction and purchase.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.3
• /
• pp.280-291
• /
• 2013

This paper analyzes desirable breast types using measurements from 31 selected female subjects based on the ratio of breast in works of art and to design a brassiere cup design according to the breast type of 182 female subjects in their 20s. The subjects selected for this paper are somewhat larger than a previous study on aesthetically perfect breasts of foreigners according to chest breadth, center neck point to breast point, breast circumference, and breast volume. However, the aesthetic breasts of foreigners are larger than the subjects selected for this study according to chest depth, under-bust circumference, and bust point to bust point. Comparing various breasts types and aesthetic breasts, padding is necessary to complement the form of flat breasts to increase the volume and diameter. Brassiere cups for cone-shaped breasts should be designed to increase breast volume through an increase in nipple height. Hemisphere breasts should be designed to increase the overall volume-leaving diameter. Protrusion breasts should enhance the functions of aggregating and supporting without any increase or decrease of the breast volume. Drooping breasts require the ability to support a large volume to stabilize the breast. Subjects were selected depending on the ratio of breast silhouette as works of art and who have large breasts in disproportional to a slender trunk. Three items, the circumferential length of breast, height of the nipple, and the depth of inner breast using the anthropomorphic measurements of 182 subjects were measured through regression equations for breast volume. Breast volume = -394.86 + 27.52 ${\times}$ (the circumferential length of breast) + 18.73 ${\times}$ (height of the nipple) + 12.85 ${\times}$ (the depth of inner breast). Regression equations to extract the aesthetic breast volume in measurements irrelevant to breasts using the anthropomorphic measurements of 31 subjects were as follows. Aesthetic breast volume = -611.30 + 17.67 ${\times}$ (bust circumference) -24.29 ${\times}$ (under-bust circumference) + 16.31 ${\times}$ (neck point to breast point to waistline) + 22.83 ${\times}$ (bust breadth) + 12.22 ${\times}$ (waist depth) -8.34 ${\times}$ (interscye- front). This prediction equation is useful to develop a breast type brassiere pattern, complement breast enhancement surgery, or minimize the effect a mastectomy.

• Fashion & Textile Research Journal
• /
• v.14 no.6
• /
• pp.960-967
• /
• 2012

The study aims to design the corset type long-line bra patterns that compensate part-somatotype of women in their 20s. The corset type long-line research bra patterns consist of 4 sections: cup, front bodice, back bodice, and shoulder strap. The full cup is made up of 2 lower part pieces and 1 upper part piece, and the shoulder strap is 16 millimeters wide. The method to design the patterns is shown in figure 4 and figure 5. The result of wearing test showed that, while the wearing testers recognized some significant differences in 19 out of 26 criteria, the examiners did in 17 out of 23. The criteria more than 1 in an average value between research bras and commercial bras were 'appropriateness of breadth of shoulder strap', 'appropriateness of pressure of armhole circumference'. 'appropriateness of pressure of waist', 'suitability of side line and body curve', 'appropriateness of positional pressure of chest circumference', 'appropriateness of positional pressure of upper part line', 'appropriateness of positional pressure of bottom part line', and 'satisfaction of whole silhouette of side and back'. The research and commercial bras were evaluated 4.23 and 3.44 respectively by the testers, and 4.25 and 3.40 by the examiners. The former ones were scored higher by both parties. They were also appreciated higher in general silhouettes of fitting and appearance.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.