• ETRI Journal
• /
• 제36권3호
• /
• pp.450-459
• /
• 2014

In this paper, we present a new, easy-to-generate system that is capable of creating virtual 3D tree models and simulating a variety of growth processes of a tree from a single, real tree image. We not only construct various tree models with the same trunk through our proposed digital image matting method and skeleton-based abstraction of branches, but we also animate the visual growth of the constructed 3D tree model through usage of the branch age information combined with a scaling factor. To control the simulation of a tree growth process, we consider tree-growing attributes, such as branching orders, branch width, tree size, and branch self-bending effect, at the same time. Other invisible branches and leaves are automatically attached to the tree by employing parametric branch libraries under the conventional procedural assumption of structure having a local self-similarity. Simulations with a real image confirm that our system makes it possible to achieve realistic tree models and growth processes with ease.

• 제어로봇시스템학회논문지
• /
• 제7권11호
• /
• pp.962-966
• /
• 2001

The major problem at a branch point for point-to-multipoint available bit rate(ABR) services in asynchronous transfer mode (ATM) networks is how to consolidate backward resource management(BRM) cells from each branch for a multicast connection. In this paper, we propose an efficient feedback consolidation algorithm based on an adaptive dynamic threshold(ADT) to eliminate the consolidation noise and the reduce the consolidation delay. The main idea of the ADT algorithm lies in that each branch point estimates the ABR traffic condition of the network through the virtual queue estimation and the transmission threshold of the queue level in branch points is adaptively controlled according to the estimation. Simulation results show that the proposed ADT algorithm can achieve a faster response in congestion status and a higher link utilization compared with the previous works.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1822-1831
• /
• 2014

Micro-grid is connected to the main power grid through a static switch. One of the critical issues in micro-grids is protection which must disconnect the micro-grid from the network in short-circuit contingencies. Protective methods of micro-grid mainly follow the model of distribution system protection. This protection scheme suffers from improper operation due to the presence of single-phase loads, imbalance of three-phase loads and occurrence of power swings in micro-grid. In this paper, a new method which prevents from improper performance of static micro-grid protection is proposed. This method works based on artificial neural network (ANN) and able to differentiate short circuit from power swings by measuring impedance and the rate of impedance variations in PCC bus. This new technique provides a protective system with higher reliability.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.154-161
• /
• 2010

This paper considers the simultaneously firing model for the artillery operations. The objective of this paper is to find the optimal fire sequence minimizing the final completion time of the firing missions of multiple artillery units for multiple targets. In the problem analysis, we derive several solution properties to reduce the solution space. Moreover, two lower bounds of objective are derived and tested along with the derived properties within a branch-and-bound scheme. Two efficient heuristic algorithms are also developed. The overall performances of the proposed branch-and-bound and heuristic algorithms are evaluated through various numerical experiments.

• 정보처리학회논문지A
• /
• 제16A권5호
• /
• pp.347-356
• /
• 2009

정교한 분기 예측기의 설계는 오늘날의 프로세서 성능 향상에 중요한 역할을 하게 되었다. 분기 예측의 정확도가 더욱 더 중요해 지면서 정확도의 향상을 위한 다수의 기법들이 제안되었지만, 기존의 연구들은 예측 지연 시간을 간과하는 경향이 있었다. 본 논문에서는 예측 지연 시간 문제를 해결하고자 조기 예측 기법 (ESP, Early Start Prediction)을 제안한다. 조기 예측 기법은 분기 예측에 있어서 활용되는 분기 명령어의 주소 대신 그것과 일대일 대응이 되는 기본 블록의 시작 주소 (BB_SA, Basic Block Start Address)를 이용한다. 즉, 분기 명령어의 주소가 사용되는 기존의 환경에서, BB_SA를 활용하여 조기 예측을 시작함으로써, 예측 지연 시간을 숨긴다. 또한 제안된 기법은 짧은 간격 숨김 기법(short interval hiding technique)을 통해 보다 더 나은 성능 향상을 기대할 수 있다. 실험 결과 본 논문에서 제안된 기법은 예측 지연 시간을 줄임으로써, 예측 지연 시간이 1 사이클인 이상적인 분기 예측기의 성능에 0.25% 이내로 근접한 IPC 결과를 얻었다. 또한 기본 블록의 시작주소와 분기 명령어 사이에 짧은 간격을 가질 경우에 대한 개선 방법을 추가적으로 적용시킬 경우, 기존의 방식과 비교하여 평균 4.2%, 최대 10.1%의 IPC 향상을 가져왔다.

• 한국동물위생학회지
• /
• 제40권4호
• /
• pp.245-251
• /
• 2017

Cold air or ice water are used to chill poultry carcasses after slaughter. In order to compare the microbial reduction effect of two different chilling systems in poultry carcasses, Pre-and post-chilled carcass samples were tested for contamination agents such as aerobic bacteria counts, E. coli counts and Salmonella spp. counts. Water chilling system showed higher reduction ratio of bacteria than air chilling system during the three seasons. Also, aging of slaughter facility was related with bacterial contamination of pre-chilld carcasses. And additional volatile basic nitrogen (VBN) test were conducted in poultry packing meats and it increased steadily during 15 days. VBN at 8~9 days were over 13 mg% with putrid smell. Poultry packing meats by water chilling system were fresher than air chilling system during early storage time. But those decayed faster after 9 days.

• Journal of International Society for Simulation Surgery
• /
• 제3권2호
• /
• pp.64-68
• /
• 2016

Aim Robots are able to increase safety for pharmacy staff as separating from toxicity of anti-cancer drugs. For patient safety, it would provide right dose of the drugs. Additionally, it can reduce price of the drugs. Therefore, in this study, a novel compounding anticancer drugs robot system (Dupalro) was developed. Methods We used the robot system, Motoman dual-arm robot from YASKAWA, Japan and medications which are adapted for the robot were constructed. In order to develop a process of compounding anticancer drugs, information about five medications that are required to make anticancer drugs in hospitals was used. Results System for the five types of medications was constructed, and relating procedures for anticancer drugs compounding robot were developed. Conclusion Dupalro successfully was able to not only provide incremental safety and efficiency for both patients and pharmacy staff, but also decrease price of anticancer drugs.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.478-489
• /
• 2013

The controllability and stability of power systems can be increased by Flexible AC Transmission Devices (FACTs). One of the FACTs devices is Interline Power-Flow Controller (IPFC) by which the voltage stability, dynamic stability and transient stability of power systems can be improved. In the present paper, the convenient operation and control of IPFC for transient stability improvement are considered. Considering that the system's Lyapunov energy function is a relevant tool to study the stability affair. IPFC energy function optimization has been used in order to access the maximum of transient stability margin. In order to control IPFC, a Brain Emotional Learning Based Intelligent Controller (BELBIC) and PI controller have been used. The utilization of the new controller is based on the emotion-processing mechanism in the brain and is essentially an action selection, which is based on sensory inputs and emotional cues. This intelligent control is based on the limbic system of the mammalian brain. Simulation confirms the ability of BELBIC controller compared with conventional PI controller. The designing results have been studied by the simulation of a single-machine system with infinite bus (SMIB) and another standard 9-buses system (Anderson and Fouad, 1977).

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.45-50
• /
• 2007

Recently, the study for filling imbalance in thermoplastic polymer has gradually been increased. However, it is hard to find the researches for filling imbalance of thermoplastic elastomer(TPE). The experiment of filling imbalance was conducted for thermoplastic vulcanize(TPV) and PP, ABS polymers in the mold with un-geometrically balanced runner system(Branch Type Runner System). In this experiment, the effects of the melt temperature, injection pressure and injection speed on the filling imbalance were investigated.

• 한국화재소방학회논문지
• /
• 제24권3호
• /
• pp.93-98
• /
• 2010

스프링클러 설비가 중요한 화재진압설비 임에도 화재 시 헤드가 작동하는 면적인 설계면적에 대한 이해의 부족으로 설계면적의 형태를 설정하고 이를 계산하는 것이 원칙에 맞지 않게 하고 있는 것으로 나타났다. 설계면적의 형태는 정사각형으로 하거나 가지관 쪽의 길이가 교차배관 쪽의 길이보다 약간 긴 직사각형으로 하는 것이 일반적이다. NFPA에서는 가지관 쪽 길이를 교차배관 쪽 길이보다 1.2배 크게 할 것을 요구하며 FM에서는 1.4배 크게 할 것을 요구한다. 동일한 설계면적에서 가지관 쪽의 길이를 길게 하면 할수록 유량과 압력이 더 커지게 된다. 설계면적의 수리계산 결과에서 가지배관 쪽의 길이가 1.2배 크게 할 경우 정방형의 경우보다 유량은 4.6%가 커지고 압력은 4.67%가 커졌으며 1.4배 크게 할 경우 유량은 7.52%가 압력은 14.51%가 커졌다. 따라서 스프링클러 설계자들은 설비를 좀 더 안정적으로 설계하기 위하여 설계면적을 정사각형 또는 가지관 쪽의 길이를 약간 길게하는 직사각형의 형태를 갖는 일반적인 규칙을 따라야 한다.