• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.319-323
• /
• 1994

In this paper, we discuss a design method of iterative learning control systems for parabolic linear distributed parameter systems(DPSs). First, we discuss some aspects of boundary control of the DPS, and then propose to employ the Karhunen-Loeve procedure to reduce the infinite dimensional problem to a low-order finite dimensional problem. An iterative learning control(ILC) for non-square transfer function matrix is introduced finally for the reduced order system.

• Steel and Composite Structures
• /
• v.25 no.4
• /
• pp.497-503
• /
• 2017

In this paper, nonlinear vibration of multi-degree of freedom systems are studied. It has been tried to develop the mathematical model of systems by second-order nonlinear partial differential equations. The masses are connected with linear and nonlinear springs in series. A great effort has been done to solve the nonlinear governing equations analytically. A new analytical method called Variational Iteration Method (VIM) is proposed and successfully applied to the problem. The linear and nonlinear frequencies are obtained and the results are compared with numerical solutions. The first order of Variational Iteration Method (VIM) leads us to high accurate solution.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.10b
• /
• pp.40-42
• /
• 2003

In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.478-489
• /
• 2013

The controllability and stability of power systems can be increased by Flexible AC Transmission Devices (FACTs). One of the FACTs devices is Interline Power-Flow Controller (IPFC) by which the voltage stability, dynamic stability and transient stability of power systems can be improved. In the present paper, the convenient operation and control of IPFC for transient stability improvement are considered. Considering that the system's Lyapunov energy function is a relevant tool to study the stability affair. IPFC energy function optimization has been used in order to access the maximum of transient stability margin. In order to control IPFC, a Brain Emotional Learning Based Intelligent Controller (BELBIC) and PI controller have been used. The utilization of the new controller is based on the emotion-processing mechanism in the brain and is essentially an action selection, which is based on sensory inputs and emotional cues. This intelligent control is based on the limbic system of the mammalian brain. Simulation confirms the ability of BELBIC controller compared with conventional PI controller. The designing results have been studied by the simulation of a single-machine system with infinite bus (SMIB) and another standard 9-buses system (Anderson and Fouad, 1977).

• Journal of Power System Engineering
• /
• v.14 no.3
• /
• pp.5-12
• /
• 2010

The purpose of this study is to analyze heterogeneous distribution of branch-like structure at downstream region of inner spray. The previous many studies about diesel spray structure have yet stayed in the analysis of 2-D structure, and there are very few of informations which are concerned with 3-D analysis of the structure. The heterogeneous distribution of droplets in inner spray affects the mixture formation of diesel spray, and also the combustion characteristics of the diesel engines. Therefore, in order to investigate 3-D structure of evaporative spray the laser beam of 2-D plane was used in this study. Liquid fuel was injected from a single-hole nozzle (l/d=5) into a constant-volume vessel under high pressure and temperature in order to visualize the spray phenomena. The incident laser beam was offset on the central axis. From the images analysis taken by offset of laser beam, we examine formation mechanism of heterogeneous distribution by vortex flow at the downstream of the diesel spray. As the experimental results, the branch-like structure formed heterogeneous distribution of the droplets consists of high concentration of vapor phase in the periphery of droplets and spray tip of branch-like structure. Also the 3-D spatial structure of the evaporative diesel spray can be verified by images obtained from 2-D measurement methods.

• KIEE International Transactions on Power Engineering
• /
• v.2A no.3
• /
• pp.121-128
• /
• 2002

This study proposes a new method for transmission system expansion planning using fuzzy integer programming. It presents stepwise cost characteristics analysis which is a practical condition of an actual system. A branch and bound method which includes the network flow method and the maximum flow - minimum cut set theorem has been used in order to carry out the stepwise cost characteristics analysis. Uncertainties of the permissibility of the construction cost and the lenient reserve rate and load forecasting of expansion planning have been included and also processed using the fuzzy set theory in this study. In order to carry out the latter analysis, the solving procedure is illustrated in detail by the branch and bound method which includes the network flow method and maximum flow-minimum cut set theorem. Finally, case studies on the 21- bus test system show that the algorithm proposed is efficiently applicable to the practical expansion planning of transmission systems in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2525-2532
• /
• 2009

In this paper, a fast sphere decoder is proposed for the joint detection of phase-shift keying (PSK) signals in uncoded Vertical Bell Laboratories Layered Space Time (V-BLAST) systems. The proposed decoder, PSD, consists of preprocessing stage and search stage. The search stage of PSD relies on the depth-first branch-and-bound (BB) algorithm with "best-first" orders stored in lookup tables. Simulation results show that the PSD is able to provide the system with the maximum likelihood (ML) performance at low complexity.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.5
• /
• pp.376-380
• /
• 2003

In order to examine the possibility that oil seed rape could be used as a forage fodder crop and to select the most suitable variety of forage rape at the southern area of Korea, two varieties of oil seed rape currently grown for oil production and six introduced varieties of forage rape with relatively high yield and high nutritional value were grown at the same condition their and yield components were observed. Forage rape was superior to oil seed rape in terms of yield components, plant fresh weight and plant dry mater weight. Velox was superior to any other variety of forage rape in these characters. When plant dry matter weight of the rape was subdivided into four components such as a main stem, branch stems, main stem leaves and branch leaves, contribution of these components to plant dry matter weight was in the order of branch stems, branch leaves, the main stem and main stem leaves. Dry matter percentage of the rape ranged from 9.32 to 11.08 percent, which was somewhat low value. There was no significant difference between two groups of the rape in terms of dry matter percentage. Velox showed somewhat higher value in dry matter percentage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.21-30
• /
• 1997

This research fundamentally deals with an analysis of service level for a multi-level inventory distribution system which is consisted of a central distribution center and several branches being supplied stocks from the distribution center, Under continuous review policy, the distribution center places an order for planned order quantity to an outside supplier, and the order quantity is received after a certain lead time. Also, each branch places an order for particular quantity to its distribution center, and receives the order quantity after a lead time. In most practical distribution environment, demands and lead times are generally not fixed or constant, but variable. And these variabilities make the analysis more complicated. Thus, the main objective of this research is to suggest a method to compute the service level at each depot, that is, the distribution center and each branch with variable demands and variable lead times. Further, the model will give an idea to keep the proper level of safety stocks that can attain effective or expected service level for each depot.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.3
• /
• pp.65-75
• /
• 2001

This research fundamentally deals with an analysis of service level for a multi-level inventory distribution system which is consisted of a central distribution center and several branches being supplied stocks from the distribution center, Under continuous review policy, the distribution center places an order for planned order quantity to an outside supplier, and the order quantity is received after a certain lead time. Also, each branch places an order for particular quantity to its distribution center, and receives the order quantity after a lead time. In most practical distribution environment, demands and lead times are generally not fixed or constant, but variable. And these variabilities make the analysis more complicated. Thus, the main objective of this research is to suggest a method to compute the service level at each depot, that is, the distribution center and each branch with variable demands and variable lead times. Further, the model will give an idea to keep the proper level of safety stocks that can attain effective or expected service level for each depot.