• 한국압력기기공학회 논문집
• /
• 제6권2호
• /
• pp.54-60
• /
• 2010

Piping failures due to thermal fatigue have been widely reported in normally stagnant non-isolable reactor coolant branch lines. Since the thermal fatigue due to thermal stratification was not considered in the piping fatigue design in old NPPs, it is important to evaluate the effect of thermal stratification on the integrity of branch lines. In this study, geometrical screening criteria for Up-horizontal branch lines in MRP-132 were applied to SI(Safety Injection) lines of KSNP 2-loop and WH 3-loop. Some computational fluid dynamic(CFD) analyses on the Reactor Coolant System(RCS) branch lines were also performed to develop the regulatory guidelines for screening criteria. As a result of applying MRP-132 screening criteria, KSNP 2-loop and WH 3-loop SI lines are determined to need further detailed evaluation. Results of CFD analyses show that both valve isolation and amount of leakage through valve can be used as technical bases for the screening criteria on the thermal fatigue analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.148-150
• /
• 2006

This paper describes the overvoltage at the branch line in underground distribution systems when the direct lightning surge strikes on conductor of overhead line. Distribution systems are very complex because it includes many branch lines, transformers, switches and so on. Therefore model system consists of overhead distribution lines, underground cable include branch lines, lightning source and switches. Analysis are performed using EMTP to understand and evaluate the surge behavior on branch lines considering various conditions in underground distribution systems. Simulation results show overvoltage with location in various cases. It is evaluated that result will be used to establish protection methods in actual underground distribution systems.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.110-119
• /
• 2009

본 연구에서는 임의의 각도로 분기되어 있는 전력선로 근방의 자계를 유도하여 정식화 하였으며 이 공식을 이용함으로써 그 자계 계산을 쉽게 할 수 있다. 이 공식들은 분기선로가 있는 배전선로의 설계 시 검토자료로서 활용할 수 있을 것으로 생각된다. 예로서 자계요소에 관한 공식들을 분기선로가 있는 3상 배전선로 모델에 적용하여 메틀랩 프로그램에 의해 계산하였으며 그 결과를 제시하였다. 그 분석결과를 요약하면 다음과 같다. 합성자계는 분기각이 작고 관측점의 높이 z가 낮으면 전 y-축상에 걸쳐 By 요소가 지배적이다. 이 합성자계는 분기각 ${\alpha}=\frac{\pi}{2}$[rad]의 경우 Bx의 영향을 크게 받는다. 또한 이 합성자계는 전력선 높이와 같은 전선로 근방에서 Bz요소가 지배적이며 분기각이 ${\alpha}>\frac{\pi}{2}$[rad]의 경우에는 y축의 분기전선 위치에서 매우 큰 값을 나타낸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.685-687
• /
• 2005

In this study, near the 3-phase power lines with branch lines were formulated. In rectangular coordinates, dependence of branch angle $\alpha$ on electromagnetic field components $B_x,\;B_y,\;B_z$ 및 $E_x,\;E_y,\;E_z$ was analyzed. The resultant electromagnetic fields B and E were discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.157-158
• /
• 2006

This paper describes the overvoltage of branch line in underground distribution systems when the direct lightning surge strikes on conductor of overhead line. Distribution systems are very complex because that includes so many branch lines, transformers, switches and so on. Therefor model systems consist of overhead distribution lines, underground cable include branch lines, lightning source and switches. Those are established by EMTP/ATPDraw. Simulation analyzes surge behavior on branch lines considering various conditions in underground distribution systems. Simulation results shoe overvoltage with location in various cases.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.1754-1763
• /
• 2017

This paper analyses the characteristics of incomplete-journey double-circuit transmission lines on the same tower formed by single-circuit lines and double-circuit lines, and then presents a fault location algorithm based on identification of fault branch. With the relationship between the three-phase system and the double-circuit line system, a phase-mode transformation matrix for double-circuit lines can be derived. Based on the derived matrix, the double-circuit lines with faults can be decoupled, and then the fault location for an incomplete-journey double-circuit line is achieved by using modal components in the mode domain. The algorithm is divided into two steps. Firstly, the fault branch is identified by comparing the relationships of voltage amplitudes at the bonding point. Then the fault location, on the basis of the identification result, is calculated by using a two-terminal method, and only the fault distance of the actual fault branch can be obtained. There is no limit on synchronization of each terminal sampling data. The results of ATP-EMTP simulation show that the proposed algorithm can be applied within the entire line and can accurately locate faults in different fault types, fault resistances, and fault distances.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.94-94
• /
• 2017

Oryza sativa and Oryza glaberrima are rice cultivars distributed in Asia and Africa. There are several differences between these cultivars in morphological characteristics such as panicle structure and especially the secondary branch number of O. glaberrima is less than that of O. sativa. Generally, branch number of panicle related to a large vascular bundle number (VBN) among O. sativa and there is a wide variation of the VBN of the peduncle from where the bundles enter into the rachis branches. However, there is less information about VBN in O. glaberrima and also the relationship between VBN and branch numbers, the primary branch number (PBN) and secondary branch number (SBN). Additionally, the genetic factor for VBN and branch number in O. glaberrima is not completely exploited. In this study, phenotypic variation for VBN and panicle structure were investigated using a set of 40 $BC_3$ -derived from IRGC 104038 (O. glaberrima from Senegal) and 35 $BC_4$ -derived from IRGC103777 (O. glaberrima from Mali) introgression lines with a genetic background of japonica rice Taichung 65. Taichung 65 had 11.8 PBN, 16.0 SBN and 11.5 VBN, while IRGC 103777 had 12.0 PBN, 15.0 SBN and 15.3 VBN. The introgression lines derived from IRGC 104038 had range from 9.0 to 14.4 in the PBN, range from 9.6 to 33.5 in the SBN and range from 9.8 to 14.8 in the VBN. Additionally, the introgression lines derived from IRGC 103777 had range from 9.0 to 18.5 in the PBN, range from 10.3 to 39.0 in the SBN and range from 9.0 to 15.3 in the VBN. Among two set of introgression lines, there are significant correlation between VBN and PBN. Multiple introgression lines indicated higher PBN, SBN and VBN than Taichung 65 and these examined characteristics are supposedly controlled by quantitative traits loci. The genetic factor related to VBN and panicle architecture can be revealed using segregating population in future study.

• 한국정보통신학회논문지
• /
• 제15권2호
• /
• pp.286-291
• /
• 2011

방향성 결합기는 RF 및 마이크로파 대역에서 신호를 분배하거나 감시하는 데 이용된다. 본 논문에서는 마이크로스트립 선로로 구현한 결합선로를 이용한 새로운 구조의 브랜치 선로 방향성 결합기를 제안하였다. 브랜치 선로 방향성 결합기는 결합도가 낮아지면 병렬로 연결된 선로의 특성 임피던스가 높아서 마이크로스트립 선로로 구현하기 어려워진다. 이를 극복하기 위하여 단락된 평형 결합 선로를 이용하여 높은 특성 임피던스를 구현하였다. 제안한 브랜치 선로 방향성 결합기의 시뮬레이션 결과 및 제작하여 측정한 결과를 보였다. 제작한 10 dB 브랜치 선로 방향성 결합기는 10% 대역폭에서 반사 손실이 30 dB 이상, 8% 대역폭에서 고립도 35 dB 이상인 결과를 보였다.

• 방사선산업학회지
• /
• 제4권3호
• /
• pp.215-219
• /
• 2010

We have subjected to gamma-irradiation to citrus buds and then grafted onto mature citrus tree. Mutant citrus branch lines have been induced. As a result of first selection, we found the several mutant lines showing interesting phenotypes such as higher sugar content. We have selected several branches showing good qualities such as higher sweetness and/or lower acidity. Some branch lines showed over $13^{\circ}Brix$ sugar content and below 0.9% acidity. Other mutant branch lines showed the changes of shape, size, peel thickness, and fiber contents or distribution of fruits. The results suggest that gamma-irradiation is an effective tool for induction of citrus mutant lines.

• 한국전자파학회논문지
• /
• 제22권6호
• /
• pp.598-604
• /
• 2011

본 논문은 연결된 결합 선로를 이용하여 브랜치 선로 결합기를 소형화하는 방법을 제시하였다. 이 방법은 기존 마이크로스트립 브랜치 선로 결합기에 사용되는 ${\lambda}/4$ 선로를 같은 특성을 갖는 연결된 결합 선로로 대신한 방법이다. 연결된 결합 선로는 우-기 모드 해석 방법을 기반으로 Z 파라미터와 T 등가 회로로 분석하였다. 이 결과를 이용하여 연결된 결합 선로를 갖는 브랜치 선로 결합기를 중심 주파수 2.4 GHz에서 FR4 기판으로 설계하고 제작하였다. 실험 결과는 이론값과 잘 일치했다. 그리고 실험 결과, 기존 단일 마이크로스트립 선로로 구현된 결합기보다 37 % 크기가 줄어들었음을 확인할 수 있었다. 이 방법은 앞으로 이동 통신 빔 형성 안테나의 급전선인 Butler Matrix의 크기를 줄이는 방법으로 사용 가능하리라 사료된다.