• 제목/요약/키워드: Brake response time

검색결과 27건 처리시간 0.029초

운전 과제 동안 노인의 브레이크 반응시간의 특성 (Characteristics of Brake Response Time During the Driving Performance in the Elderly)

  • 신화경;이호철
    • The Journal of Korean Physical Therapy
    • /
    • 제21권3호
    • /
    • pp.81-86
    • /
    • 2009
  • Purpose: This study compared the characteristics of the brake response time during the driving task between elderly and younger drivers. Methods: The participants consisted of an elderly group (n=12) and a younger group (n=12). The brake response time (BRT), which consisted of the reaction time (RT) and movement time (MT), was assessed in an actual driving car. The BRT was measured at the initiation and termination of the brake response for the driving task Results: The elderly group showed a significantly longer delay in the initiation and termination of the brake response than the younger group. The BRT correlated significantly with both the RT and MT. However, the RT showed a more significant correlation. Conclusion: A delay in the initiation and termination of the brake response may have clinical implications. A further study will be needed to determine the different factors contributing to the driving performance of elderly drivers.

  • PDF

도시철도용 전기기계식 제동장치의 특성시험 (Characteristic Test of the Electro Mechanical Brake Actuator for Urban Railway Vehicles)

  • 김민수;오세찬;권석진
    • 한국정밀공학회지
    • /
    • 제33권7호
    • /
    • pp.535-540
    • /
    • 2016
  • The braking device in railway vehicles decelerates or stops the train by dissipating the thermal energy converted from kinetic energy into the air. Therefore, the brake system is crucial for safety. In this paper, we performed a study on an electromechanical brake actuator using an electrical motor as an alternative to pneumatic air cylinders to reduce the idle running time in braking, which subsequently increases braking distance, and to ensure reliable response characteristics. Especially, to analyze the response characteristics of the electromechanical brake actuator, we measure the delay time, response time and power consumption compared to the air cylinder. It is confirmed that the electromechanical brake actuator can reduce reaction time by 0.1 seconds (Braking Action) and 0.46 seconds (Brake Release) compared to the air cylinder.

비접촉식 와전류형 제동 장치의 최적 토오크 제어 (Optimal torque control of noncontact type eddy current brake system)

  • 이갑진;박기환;류제하
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
    • /
    • pp.261-264
    • /
    • 1997
  • A contactless eddy current type braking system is developed to take advantages of the recent brake system which uses hydraulic force can show high efficiency in a certain velocity region, but not in a high velocity region, and has initial response delay time and pressure build-up time which make stopping distance longer. These are the limits of mechanical brake system of a contact type, which makes a concept brake system required. So, in this paper, the contactless brake system .of a inductive current type is chosen instead of hydraulic brake system. This brake system can be used almost forever for being no wear and contributed to lightening weight of a vehicle. Besides, the contactless brake system can be used as that of electric or solar car with anti-lock brake system. The analysis of induced electromotive force and braking torque obtained with theoretical approximate model, the design of a braking system and a nonlinear controller, and the results of simulation of the ABS, experiment are included.

  • PDF

ER 브레이크를 이용한 와이어 방전가공기의 장력제어 (Tension Control of a Wire Cut Discharge Machine Using ER Brake)

  • 김기선;조명수
    • 한국공작기계학회논문집
    • /
    • 제13권5호
    • /
    • pp.24-29
    • /
    • 2004
  • This paper presents the tension control of a wire-cut discharge machine using electrorheological(E,R) fluid based brake system. On the basis of the tension level required in the machine, an appropriate size of the ER brake which features design simplicity, fast response and salient controllability is designed. Considering the Bingham property of ER fluid and actuator response time, the governing equation of the ER brake is derived. And a tension propagation of wire electrode is modeled via frequency response. The tension control performance of the discharge machine is simulated by using a robust sliding mode controller.

상용 트럭의 공압 브레이크 응답 특성에 관한 연구 (The Korea Academia-industrial cooperation Society)

  • 김진택;정도균;최판진;박원기;박찬희;유범상;백병준
    • 한국산학기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.1969-1975
    • /
    • 2012
  • 대형 상용 차량에 사용되는 에어 브레이크 시스템은 제동시 상대적으로 응답 시간이 길고 압력 손실이 크게 발생한다. 제동 시간은 파이프 시스템의 적절한 설계에 의해서 최소화 시킬 수 있다. 제동 시간은 시스템 압력의 증가, 에어 라인의 감소 및 재질의 변화에 대해 감소시킬 수 있다. 본 연구에서는 상용 트럭에 대한 리그를 구성하여 에어 브레이크의 특성에 대해서 고찰하였다. 해석 프로그램에 대한 신뢰성을 확보하기 위하여 실험 값과 비교하였고, 브레이크 시스템에 영향을 미치는 시스템 압력, 파이프의 재질 및 직경, 탱크와 챔버에서 압력에 대한 온도 영향을 검토하였다.

화물열차의 공기제동 압력 특성에 관한 실험적 연구 (Experimental Study on the Pressure Characteristics of Pneumatic Brake for Freight Train)

  • 남성원;문경호;이동형
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집B
    • /
    • pp.593-598
    • /
    • 2000
  • Experimental study is conducted to clarify the pneumatic characteristics of brake system for freight train. Empty-load and diaphragm brake systems are mainly installed in the freight trains owned by KNR(Korean National Railroad). Experimental train set is composed of sixteen freight train and one diesel locomotive that are now in use. From the experimental results, in case of commercial brake, empty-load brake system responds to the brake command more slowly than the diaphragm brake system. But, in case of release command, the response time of diaphragm brake system is shorter than that of empty-load one. In the emergency brake test, the decreasing rate of brake pipe pressure of tenth car is almost same that of decreasing rate of commercial brake service.

  • PDF

Effects of Secondary Tasks on Vehicle Speed and Distance during Driving and Brake Response Time during Unexpected Situation

  • Lee, Su-Jeong;Yang, Jae-Woong;Kim, Ji-Hye;Choi, Mi-Hyun;Kim, Han-Soo;Choi, Jin-Seung;Min, Byung-Chan;Tack, Gye-Rae;Chung, Soon-Cheol
    • 대한인간공학회지
    • /
    • 제30권3호
    • /
    • pp.403-408
    • /
    • 2011
  • The purpose of this study was to investigate the effects of the secondary tasks such as sending text message(STM) and searching navigation(SN) on vehicle speed and distance during driving and brake response time during unexpected situation using a driving simulator. The participants included 19 college students; 9 males aged $25.2{\pm}1.0$ with $2.4{\pm}2.0years$ of driving experiences and 10 females aged $21.4{\pm}0.5$ with $1.3{\pm}0.5years$ of driving experiences. All subjects were instructed to keep a certain distance(30m) from the car ahead and a constant speed(100km/h). Average speed and average following distance were measured during 10 seconds before unexpected situation. Also, brake response time after unexpected situation was measured. Average speed was more decreased and average following distance was more increased during the driving with secondary tasks than driving only. Male maintained the assigned speed and distance better than female. The brake response time was faster during driving only than the driving with secondary tasks. And the brake response time of male was shorter than that of female.

ER 제동장치를 적용한 와이어 컷 방전의 가공 특성 (Machining Characteristics of Wire EDM Using ER Brake System)

  • 김기선
    • 한국정밀공학회지
    • /
    • 제21권11호
    • /
    • pp.171-178
    • /
    • 2004
  • This paper presents vibration characteristics of a wire cut discharge machine in which an electro-rheological brake actuator is used to control the wire tension. The ER brake actuator has several advantages including design simplicity, fast response time and real-time controllability. On the basis of the tension level required in the machine an appropriate size of the ER brake actuator is devised. The ER brake actuator is then incorporated with the machine and the field-dependent wire tension is experimentally evaluated. The straightness of the workpiece is also empirically investigated by changing the intensity of the electric field.

운전 시 브레이크 페달링 속도가 하지 근수축 개시시간에 미치는 영향 (The effects of brake pedaling speed on onset time of muscle contraction in the lower extremity during driving task)

  • 성길희;황윤태;박지원;신화경
    • The Journal of Korean Physical Therapy
    • /
    • 제23권1호
    • /
    • pp.7-11
    • /
    • 2011
  • Purpose: Driving is essential to maintain independent living status in modern times. Many patients want to know when they can drive again, but it's only possible if they have the ability to control lower extremity muscles. In this study, we compared the effects of velocity on onset time of lower extremity muscles during driving tasks. Methods: Twelve participants (5 male, 7 female) were enrolled. EMGs were used to test the onset time of lower extremity muscles; tibialis anterior, soleus, rectus femoris. To analyze the data, we used two way ANOVA. Results: According to brake pedaling velocity, there was a significant difference in brake response time (p<0.05). Further, when comparing the lower extremity muscles, there was a significant difference in onset time (p<0.05). The order of muscle recruitment was tibialis anterior, rectus femoris, and soleus for achieving maximal velocity, but the order was rectus femoris, tibialis anterior, soleus for achieving submaximal velocity. Conclusion: Brake pedaling velocity has significant effects on onset time of muscle contractions in the lower extremities. We suggested that a future study needs more subjects and more detailed research such as evaluat-ions of visuo-motor coordination and fine motor dexterity.