• 한국자동차공학회논문집
• /
• 제5권5호
• /
• pp.27-36
• /
• 1997

For the strength design of the brake system of a forklift truck, a procedure to calculate the internal forces acting on the system is presented in this paper. Vehicle dynamics, brake system kinematics, and internal force equilibrium analysis are integrated into the procedure. Design parameters such as stopping distance, maximum decceleration, and maximum torque generated by pedal force are considered in the vehicle dynamics, and geometric parameters of the brake system are considered in the brake system kinematics. With the two analysis results obtained, the internal forces acting in the brake system are finally calculated in the procedure.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.224-228
• /
• 2003

The basic Principles and methods of the on-line monitoring of tribology parameters (friction coefficient and wear allowance) and fault diagnosis for the hoist disc brake system were introduced, the method were based on the spring force and oil pressure of the brake system and the hoist kinematics parameters. The experiment on the monitoring and diagnosis of hoist brake system were carried out. The research results showed: the monitoring and diagnosis methods are feasible.

• 한국산학기술학회논문지
• /
• 제15권11호
• /
• pp.6406-6411
• /
• 2014

본 논문은 자동차 디스크 브레이크에서 발생하는 스퀼 현상을 보다 효과적으로 해석할 수 있는 스퀼 융합모델을 소개한다. 시스템의 형상 및 진동모드 추출은 유한요소법을 따르고 각 부품별 접촉부의 기술은 수학적 모델을 이용한다. 특히 회전하는 디스크와 정지상태의 패드 간 마찰력을 수학적으로 정교하게 기술하여 이를 유한요소 운동방정식에 접목한다. 이를 통해 선형안정성의 해의 정확도를 개선한다. 또한 다양한 시스템 파라메터 연구를 통하여 접촉강성에 대한 스퀼 민감도 및 모드연성 메카니즘을 구현한다.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.958-966
• /
• 2007

This study presents full vehicle dynamics model for the dynamic characteristic analysis of chassis parts which are suspension and brake system. This vehicle dynamics model is appled to kinematics and quasi-static analysis for each chassis part. In order to develop the vehicle dynamics model, the parameters of each chassis element part which are bush, spring and damper are measured by experiment. Also the wheel forces and moments of 6 DOF are measured at each wheel center. These data are applied to input parameter for vehicle dynamics model. And the verification of the developed model is achieved to comparison with the experimental force data of spring, trailing arm and assist arm by using the load response by strain gauge. These experimental force data are acquired by road test at event surfaces of P/G which are belgian and chuck holes roads.