• 수산해양기술연구
• /
• 제41권3호
• /
• pp.227-233
• /
• 2005

In order to estimate the effective horse power(EHP) in towing net of a bottom trawl ship, the ship's resistance was calculated by using a series data of Yamagata and Wigley formula. Also the effective horse power for a ship(EHPs) was estimated versus the ship speed in sailing and the propulsive efficiency was calculated with the brake horse power and the effective horse power. Then the effective horse power for a ship and a trawl net were estimated in the application of the propulsive efficiency in towing net. The total effective horse power($EHP_T$) was average 187.6kW and the effective horse power for a 1.awl net($EHP_n$) was average 176.7kW at a smooth sea state in towing net. The ratio of $EHP_n$ to $EHP_T$ was about 94.0% and the value was higher slightly than was already informed at a smooth sea state. The power for keeping up a townet speed was required more about 20% of a maximum continuous power at a rather rough sea state than a smooth sea state. In the future, if the residual resistance is considered with a sea state, $EHP_n$ will be estimated more correctly Also the data of EHP estimated by this method will be used as the basic data to design a trawl net.

• 한국농공학회지
• /
• 제18권4호
• /
• pp.4259-4264
• /
• 1976

This paper, is about the test on the operating performance of diesel engine by using of soybean oil which farmers could supply in their farm yard. The diesel engine used is a swirl-chamber type, four stroke cycle with single cylinder, air cooling and its rated horse power is 2 PS per 1300 rpm. Several results obtained are as follows; 1. The starting performance of diesel engine with soybean oil is almost the same as that with light oil. 2. The variation of engine speed according to various engine load is small when soybean oil is used compared with light oil. It is considered that soybean oil is desirable for the purpose of industerial power machine fuel. 3. The specific fuel consumption increases approximately 10 percent high in the condition of rated horse power and maximum horse power and shows less or same during the load test in low velocity, when soybean oil is used 4. Though the brake thermal efficiency in the condition of rated horse power and maximum horse power is inclined to decrease when soybean oil is used compared during the load test in low velocityt shows good inclination.

• 수산해양기술연구
• /
• 제11권1호
• /
• pp.21-25
• /
• 1975

Authors studied the propulsion efficiency of G. T. 280 to 300 class tuna longliners used in Korea. At first authors calculated the ratios and factors of the ship by use of principal dimensions. In cordance with this ratios and factors authors, examined the effective horse power, propulsion ficiency and brake horse power, and following results are obtained. (1) EHP is slightly increased according to the increasing of Froude number and speed. (2) Value of propulsion coefficient is obtained in the range of 51-54% at the cruising speed an its average is 52% in 6-13 knot of the speed. (3) EHP and BHP are increased according to the increasing of prismatic coefficient at the same speed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권5호
• /
• pp.97-110
• /
• 1992

Rape-seed oil has high viscosity and high rubber content like other vegetable oils. When crude rape-seed oil obtained by a general oil extraction process is used in a diesel engine, automization condition during injection is not good and a large amount of combustion product is doposited in a combustion chamber. The improvement of a diesel engine is required to use rape-seed oil as a diesel engine fuel. In this study, the physical and chemical properties and combustion characteristics of rape-seed oil were investigated. The auxiliary aid was developed to improve automization condition and the effect of the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The exraction rate is 33%. The resuls show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318$^{\circ}C$, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to those of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aid on the performance of a diesel engine was determined. The results are as follows. 1) Oil content of rape-seed is 45%. The extraction rate is 33%. The results show higher values compared to those of other vegetable oils. 2) The viscosity of rape-seed oil is 50.8 cSt and nearly 14 times of diesel oil viscosity. 3) The heating value and flash point of rape-seed oil are 9720kcal/Kg and 318.deg.C, respectively. 4) In case rape-seed oil is used as fuel, brake horse power, specific fuel consumption and brake thermal efficiency are compared to theose of diesel oil. The results of rape-seed oil show 3.6%, 12.7% and 3.1% higher values. 5) Particle size of injection fuel with the auxiliary injection aids is 100.mu.m smaller than that od injection fuel without the aid. 6) Brake horse power and brake thermal efficiency with the auxiliary injection aid increase 5.07% and 6.07%, respectively. However, specific fuel consumption decreases 3.85% with the auxiliary injection aid.

• 대한공업교육학회지
• /
• 제33권2호
• /
• pp.218-231
• /
• 2008

본 실험 연구의 목적은 교사교육기관에서 예비 교사들에게 수송기술분야에서 엔진의 기본적인 인자들에 관한 개념 이해를 돕는 데에 있다. 실험엔진으로서 P8250을 사용하여 회전속도를 30~55 rps 범위 내에서 내연기관의 성능의 지배인자인 토크, 제동마력, 연료소비량 등의 기존자료를 구하였고, 이들을 바탕으로 기관의 제동마력과 토크선도로 구성되는 성능곡선을 만들었다. 이 연구에서 얻은 주요 결과를 정리하면 다음과 같다. 첫째, 엔진의 회전속도가 증가함에 따라서 동력 및 제동마력은 선형적으로 증가하고, 중속이상에서는 토크가 감소하였다. 둘째, 토크 및 비 연료 소모량의 변화를 확인할 수 있어 엔진성능의 개념을 이해할 수 있다. 셋째, 엔진성능의 제동마력과 토크의 실험값은 이론값과 유사한 경향을 보였다. 넷째, 회전속도에 따른 공연비는 엔진 회전수가 증가할수록 비례적으로 증가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권5호
• /
• pp.16-24
• /
• 2000

In this study, using frying oil, performance of engine and emission concentration were compared with the case of using diesel oil. And results are as follows. 1. Engine torque and brake horse power indicate nearly same value as the case of using diesel fuel. 2. Temperature of exhaust gas was increased with as high engine speed and load. 3. To reduce concentration of hydrocarbon, it is effective to operate using used frying oil in low engine speed and load, and adding LPG in high engine speed and load. 4. Concerning with concentration of carbon mono oxide and smoke emission, it was assured, that as engine load increased, lower concentration emitted in case of utilizing mixed fuel than that of utilizing pure diesel fuel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권5호
• /
• pp.654-661
• /
• 1999

This is fundamental study to improve performance of the SI engine,. In this study a conven-tional kerosene engine was modified to LPG dedicated engine which can be operated with LPG(Liquefied Petroleum Gas) The modified model were tested in accordance with various compression ratios. Also the engine performance with modified model was compared with the conventional one. The results are sum-marized as follow; 1. In comparison with the conventional kerosene Gasoline engine and LPG dedicated engine can be operated with lower exhaust emission better fuel economy and better thermal efficiency. 2. But is produce a slightly lower brake horse power.

• 오토저널
• /
• 제13권3호
• /
• pp.49-57
• /
• 1991

Natural gas is one of the most promising alternative fuels for automative vehicles, because it has lower exhaust emissions and better fuel economy characteristics than gasoline and can be used in conventional engines with a little modification. In the present study, a conventional gasoline engine was modified to a CNG dedicated engine, which can be operated with CNG( compressed natural gas) only, and a engine bench test was performed at various compression ratios. As a result, it was revealed that the prototype CNG engine can be operated with lower exhaust emissions, better fuel economy and better thermal efficiency, but with a sightly reduced brake horse power, compared to the conventional gasoline engine.

• 한국항행학회논문지
• /
• 제23권1호
• /
• pp.44-54
• /
• 2019

많은 나라들에서 늘어가는 자동차로 인한 교통체증에 대체 할 수 있는 새로운 교통수단에 대한요구가 증가하고 있다. 또한, 경제적인 성장으로 인한 자동차 보유 대수의 증가로 앞으로 교통체증은 더욱 증가할 것이다. 이를 위해 도로주행형 개인용 항공기(PAV; personal air vehicle)에 관한 많은 연구가 진행되고 있다. 본 연구에서는 도로주행형 PAV의 사이징에서 엔진과 익형의 종류에 따른 주요 설계 변수인 익면하중과 동력대중량비를 구하기 위한 사이징을 수행하였다. 즉, 사이징 과정에서 국내 환경과 일반 항공기급 인증기준인 FAR PART 23을 고려한 임무형상에 대하여 익면하중, 동력대중량비, 제동마력, 그리고 연료효율의 그래프를 통해서 설계점을 결정하는 연구도 수행하였다. 사이징 결과 디젤 엔진을 사용하는 경우 가솔린 엔진보다 더 큰 중량으로 인해 더 큰 이륙총중량, 날개 면적, 그리고 더 큰 동력을 요구한다.

• 한국유체기계학회 논문집
• /
• 제14권5호
• /
• pp.12-17
• /
• 2011

The seawater lift pump system is responsible for maintaining the open canal level to provide the suction flow of circulating water pump at the set point. The objective of this paper is to design a 2-stage mixed flow pump (for seawater lifting) by inverse design method and to evaluate the overall performance and the local flow fields of the pump by using a commercial CFD code. Rotating speed of the impeller is 1,750 rpm with the flow rate of 2,700 $m^3$/h. Finite volume method with structured mesh and realized k-${\varepsilon}$ turbulent model is used to guaranty more accurate prediction of turbulent flow in the pump impeller. The numerical results such as static head, brake horse power and efficiency of the mixed flow pump are compared with the design data. The simulated results are good agreement with the design data less 3% error.