• 대한방사선치료학회지
• /
• 제30권1_2호
• /
• pp.97-105
• /
• 2018

목 적 : Proton Therapy는 Bragg-peak를 이용해 종양에는 최대의 선량, 정상조직에는 최소의 선량을 줄 수 있는 특징을 가지고 있기 때문에 환자의 위치변화나 치료부위의 위치 변화를 정량화 할 수 있는 의료영상 분석 시스템은 양성자 치료에 있어서 무엇보다도 중요하다. 본 연구 목적은 Matlab 기반의 In-house Registration code를 제작하여 기존 DIPS program을 통한 Set-up과 In-house code를 통한 영상정합을 비교하여 Algorithm의 유용성을 평가하고 DIPS와 DRR간의 오차 값을 확인하여 기존 치료의 정확성을 평가하고자 한다. 대상 및 방법 : 본원에서 양성자 치료를 받은 13명의 뇌종양, 두경부암 환자를 대상으로 하였으며 영상비교에 필요한 DIPS Program System(Version 2.4.3, IBA, Belgium)와 환자의 치료계획을 위해 Eclipse Proton Planning System(Version 13.7, Varian, USA)을 사용하였다. Registration 방법에 대한 Validation을 위해 Test image를 인위적으로 회전 및 이동하여 기존 Image와 영상정합 하였고, 기존 Set up 방식의 DIPS program의 환자 일별 초기 Set up image를 plan DRR과 영상정합 하여 각각 오차 값을 얻어 Algorithm의 유용성을 평가하였다. 그리고 기존 Set up 방식의 정확성을 평가하기 위해 환자 일별 최종 Set up image와 DRR image를 영상정합하여 오차 값을 확인하였다. 결 과 : Test image를 left와 right 방향으로 각각 0.5, 1, 10 cm를 이동시켰을 때 평균 0.018 cm의 오차 값을 보였으며 시계와 반시계방향으로 각각 1, $10^{\circ}$씩 회전시켰을 경우에는 평균 $0.0011^{\circ}$의 오차를 나타냈다. 4명의 환자 일별 초기 image를 영상정합 하였을 때는 x, y, z 방향 순으로 평균 0.056, 0.044, 0.053 cm의 오차 값을 나타냈으며 Rotation, Pitch 순으로 0.190, $0.206^{\circ}$의 차이를 나타냈다. 13명의 환자 일별 최종 image를 영상 정합 하였을 때는 x, y, z 방향 순으로 평균 차이는 0.062, 0.085, 0.074 cm이였고 Vector 값으로는 평균 0.120 cm의 차이를 보였다. Rotation, Pitch 순으로는 평균 0.171, $0.174^{\circ}$의 차이 값을 나타냈다. 결 론 : 본 연구를 통해 제작된 Matlab 기반의 In-house Registration code는 단순한 Image 뿐만 아니라 해부학적 구조에서도 Intensity 기반의 정확한 영상정합을 나타냈다. 또한 기존 치료방식의 DIPS program을 통한 Set-up 오차는 매우 미미한 차이를 보임으로써 이는 양성자치료의 정확성을 확인할 수 있었다. 앞으로 임상적용을 위해 추가적인 프로그램 개발과 향후 Intensity 기반의 Matlab In-house code 연구가 필요하다고 사료된다.

• 인지과학
• /
• 제34권2호
• /
• pp.111-151
• /
• 2023

폭음군은 알코올 사용 장애 환자와 유사한 인지기능의 장애를 보인다고 보고된다. 신경심리검사와 뇌 영상 기법을 사용하여 알코올 사용 장애 환자들의 시지각 기능을 조사한 선행 연구에서는 이들이 전체-세부 시지각 처리 결함을 가짐을 보고하였다. 폭음군의 전체-세부 시지각 결함에 대한 신경학적 근거가 제시되고 있으나 폭음군의 전체-세부 시지각 처리 과정을 조사한 연구는 현재까지 보고되지 않았다. 따라서 본 연구는 폭음을 하는 여자대학생의 세부 편향적 시지각 특성을 Navon의 전체-세부 방안과 사건관련전위를 사용하여 조사하였다. 전체-세부 방안에서 자극은 세부 수준 혹은 세부 수준의 자극들로 구성된 전체 수준에서 제시되었으며, 두 수준에서 제시되는 자극은 서로 일치하거나 불일치하였다. 본 연구에 폭음군 25명과 비폭음군 25명이 참여하였다. 행동자료 분석 결과, 비폭음군과 폭음군 모두 세부 자극에 비해 전체 자극을 더 빠르고 정확하게 처리하였다. 또한, 두 집단 모두 전체불일치 조건에 비해 세부불일치 조건에서 유의하게 낮은 반응정확률과 긴 반응시간을 보였으며, 이는 전체 수준의 비목표 자극에 의해 간섭을 받았음을 의미한다. 사건관련전위의 분석 결과는 다음과 같다. 비폭음군과 폭음군 모두 세부불일치 조건에 비해 전체불일치 조건에서 더 큰 N100 진폭, 세부 조건에 비해 전체 조건에서 더 큰 P150 진폭을 보였고, N200의 경우 두 집단 모두 전체 조건에 비해 세부 조건에서 더 큰 진폭, 전체불일치 조건보다 세부불일치 조건에서 더 큰 진폭을 보였다. 반면, P300의 경우 비폭음군에 비해 폭음군이 더 작은 진폭을 보였으며, 특히 세부 조건에서 더 작은 P300 진폭을 보였다. 또한, P300 진폭과 폭음 점수 사이의 부적 상관, 즉 폭음 점수가 증가할수록 P300 진폭이 감소하는 것이 관찰되었다. N100은 초기 시각 주의, P150은 시각적 특징을 기반으로 한 목표 자극의 지각 과정, N200은 갈등 모니터링 및 반응 억제, 그리고 P300은 인지적 억제 및 주의 할당 과정을 반영하는 것으로 알려져 있다. 전체-세부 방안의 세부 과제에서는 세부 수준에서 제시되는 목표 자극에 주의를 할당하는 동시에 전체 수준에서 제시되는 비목표 자극에 대한 주의는 억제하는 것이 요구된다. 따라서 본 연구 결과는 폭음을 하는 여자대학생이 세부 편향적 시지각 특성을 가지고 있지 않고 대신 주의를 억제하는 능력의 결함을 가지고 있을 가능성을 시사한다.

• 대한핵의학회지
• /
• 제32권5호
• /
• pp.414-424
• /
• 1998

목적: PET과 MR 영상을 체계적으로 합성i분석하여 각각의 영상기법이 갖는 단점을 보완하고 기능을 향상시킴으로써 보다 정확하고 유용한 임상정보를 얻을 수 있다. 두 영상을 공간적으로 합성하기 위해서 머리 표피 경계점들 간의 거리를 최소화하는 알고리즘을 이용할 경우 경계점 추출의 정확성 및 견실성과 거리 계산 속도가 합성 알고리즘의 성능을 결정하는 중요한 요소가 된다. 본 연구에서는 PET 영상의 경계 추출과 거리 계산 방법을 개선하고 이를 이용하여 PET과 MR 영상을 3차원적으로 합성하였다. 대상 및 방법: 공간적인 합성을 위한 영상처리기법의 핵심인 경계점 추출을 위해 PET영상에서는 방출스캔 sinogram의 경계를 강조한 후 재구성한 횡단면으로부터 2 mm 간격으로 머리 표피 경계점들을 추출하였으며 MR 영상에서는 각 횡단면마다 약 2도 간격으로 경계점들을 추출하였다. 두 영상의 모든 경계점들 간의 평균 유클리디안 거리를 최소화하는 3차원 가상공간 상에서의 위치 이동과 회전 각도를 최소자승법을 이용하여 구한 후 PET영상을 역 전환하여 위치 정합을 하였다. 평균 거리의 계산 속도를 향상시키기 위하여 고정된 대상의 각 경계점을 중심으로 하여 주변 공간 정들에서의 거리를 순차적으로 계산하고 이들의 최소값을 취하는 방법으로 거리지도를 구성하였으며 최소자승법에서 경계점들 간의 위치가 변할 때마다 매번 평균거리를 다시 계산하지 않고 거리지도를 참조하여 평균 거리를 산출하는 방법을 사용하였다. 위치 정합된 두 영상의 동시 표현을 위하여 PET 영상의 화소값에 $0.4{\sim}0.7$부터 1사이의 범위로 정규화된 MR 영상의 화소 값으로 가중치를 주는 가중정규화 방법을 사용하였다. 결과: 방출스캔의 sinogram을 이용함으로써 PET영상의 경계를 견실하게 추출할 수 있었으며, 거리지도를 이용하여 거리 계산을 한 결과 계산 속도를 향상시킬 수 있었다. 정상인의 뇌영상에 대해 위치 정합을 실시한 결과 평균 거리 오차는 2mm 이하였다. 가중정규화 방법을 사용하였을 때 합성된 영상의 정성적인 식별 명확도가 향상하였다. 결론: 견실한 PET 영상 경계점 추출과 거리지도를 이용한 계산 속도의 향상을 통해 뇌 PET과 MR 영상 합성기법의 성능을 개선할 수 있었으며 이를 이용하며 개발한 영상정합 프로그램은 임상 환경에서 유용하게 사용될 수 있을 것이다.

• 한국방사선학회논문지
• /
• 제11권6호
• /
• pp.493-500
• /
• 2017

본 데이터 분석은 INFINITT 프로그램을 사용하여 유속증강 자기공명 혈관 조영술(FRE-MRA)과 전산화단층 촬영 혈관 조영술(CTA)에서 신호대 잡음비(SNR)와 대조도대 잡음비(CNR) 분석에 따른 뇌혈관 질환에 대한 정량적 평가를 하고자 하였다. 2017년 1월~4월까지 C대학병원에서 뇌혈관영상검사를 시행한 63명의 환자 중 FRE-MRA와 CTA를 동시에 시행한 19명의 뇌혈관 질환 환자영상 중 움직임으로 인한 인공물로 분석이 어려운 2명의 영상을 제외한 17명의 영상을 분석하였다. 분석 방법으로 FRE-MRA와 CTA에 대하여 각각 5 부위(앞대뇌동맥, 좌 우 중간대뇌동맥, 좌 우 뒤대뇌동맥)에 관심영역을 설정하고 SNR과 CNR를 평가하였고, 분석결과에 대한 유의성 평가는 독립 t 검정을 통하여 유의성을 확인하였다. 본 연구에 대한 결과로서 각각의 SNR과 CNR을 평균하였을 때 FRE-MRA는 앞대뇌동맥($1500.73{\pm}12.23/970.43{\pm}14.55$), 좌중간대뇌동맥($1470.16{\pm}11.46/919.44{\pm}13.29$), 우중간대뇌동맥($1457.48{\pm}17.11/903.96{\pm}14.53$), 좌뒤대뇌동맥($1385.83{\pm}16.52/852.11{\pm}14.58$), 우뒤대뇌동맥($1318.52{\pm}13.49/756.21{\pm}10.88$)의 값이 측정되었고, CTA는 각각 앞대뇌동맥($159.95{\pm}12.23/123.36{\pm}11.78$), 좌중간대뇌동맥($236.66{\pm}17.52/202.37{\pm}15.20$), 우중간대뇌동맥($224.85{\pm}13.45/193.14{\pm}11.88$), 좌뒤대뇌동맥($183.65{\pm}13.47/151.44{\pm}11.48$), 우뒤대뇌동맥($177.7{\pm}16.72/144.71{\pm}11.43$)의 값이 측정되었다(p<0.05). 결론적으로 5부위의 뇌혈관 질환 영상을 분석한 결과 뇌경색이나 뇌출혈과는 관계없이 MRA가 SNR과 CNR값이 높은 것으로 나타났다. 따라서 환자협조가 가능하여 검사시간이 길다는 단점만 극복할 수 있으면 CTA에 비해 조영제의 부작용으로부터 자유로운 FRE-MRA가 유용하였다.

• 농촌의학ㆍ지역보건
• /
• 제26권1호
• /
• pp.65-79
• /
• 2001

뇌혈관질환은 우리 나라뿐만 아니라 전세계적인 주요 사망원인이며, 높은 치명률 외에 심각한 후유증을 남겨 사회적, 경제적 측면에서 많은 부담을 주는 대표적인 질환이다. 본 연구는 광주, 전남 북 지역에 소재하고 있는 양방병원과 한방병원에서 뇌혈관질환으로 입원, 치료 후 퇴원하였던 환자들의 의무기록을 조사하여, 뇌혈관질환의 의료기관 이용 실태를 알아보고 뇌혈관질환의 의료기관 이용 실태를 알아보고 뇌혈관질환의 병형의 분포와 각각의 임상적 양상을 비교하고자 실시하였다. 연구대상은 2000년 1월부터 3월까지 12개 양방병원과 6개 한방병원에서 뇌혈관질환으로 입원, 치료후 퇴원한 것으로 보고된 1,070명이며, 이들을 대상으로 일반적 특성, 영상진단 결과, 병형별 분포와 각각의 임상적 특징 및 입원기간과 내원 시기를 비교하였다. 전체 대상자 중 양방병원에서 치료받은 경우는 51.0%, 한방병원에서 치료받은 경우는 49.0%이었다. 성별 분포를 보면 양 한방 병원 모두에서 여자가 남자보다 많았으며, 연령별로는 70세 이상인 경우가 양 한방 각각 38.1%와 37.2%로 가장 많은 분포를 보였다. 양방병원 치료받은 대상자들의 91.8%, 한방병원은 79.8%가 뇌 영상진단 검사를 받았으며, 뇌경색이 각각 48.5%, 48.7%로 가장 많았다. 양 한방병원 모두에서 연령이 증가할수록 뇌출혈의 비율은 감소하고 뇌경색의 비율이 증가하였다. 병형별로 나누어 본 임상적 특징을 보면 분류가 불가능한 경우는 양방병원은 하지마비, 한방병원은 상지마비가 가장 많았고, 뇌출혈의 경우 양방병원은 의식상태의 소실, 한방병원은 구음장애였으며, 뇌경색은 양방병원은 상 하지 마비, 한방병원은 구음장애이었다. 이용병원의 유형에 따른 발병후 내원시까지의 시간과 입원기간을 비교한 결과 내원시까지의 시간은 양방병원이 5.5일로 한방병원의 31.4일보다 통계적으로 유의하게 짧았으며, 입원기간은 양방병원이 21.0일 한방병원이 25.2일로 한방병원이 입원기간이 길었으나 통계적으로 유의하지는 않았다. 결론적으로 양 한방병원의 뇌혈관질환에 대한 치료적 접근과 단계, 질병 특성을 고려하여 뇌혈관질환 환자들의 체계적이고 효율적인 관리를 위한 노력이 필요할 것으로 생각된다.

• Journal of Genetic Medicine
• /
• 제4권1호
• /
• pp.38-44
• /
• 2007

목 적 : 멘케스병은 X-연관성 열성으로 유전되는 질환으로 copper-transporting P-type ATPase에 부호화된 ATP7A 유전자의 돌연변이에 의해 발생한다. 임상 증상으로 진행성 신경계 퇴행, 정신 지체, 저색소 피부색, 혈관계 합병증을 나타내며, 조기 진단과 치료가 예후에 중요한다. 저자들은 ATP7A 유전자 분석을 통한 새로운 돌연변이와 산전 진단의 사례를 보고하는 바이다. 방 법 : 영아기에 꾸불꾸불한 머리카락, 진행성 신경계 퇴행, 근긴장저하를 보인 5명의 멘케스병 환자를 대상으로 하였다. 혈청 구리와 세룰로플라즈민 농도는 모든 환자에서 감소되어 있었으며, 뇌 핵자기공명영상 소견상 꾸불꾸불한 뇌혈관의 관찰되었다. 배양된 피부 섬유아세포에서 추출한 cDNA 또는 말초 혈액 백혈구에서 분리한 genomic DNA로 유전자 분석을 시행하였다. 산전 진단은 융모막 채취 또는 양수 검사를 통하여 2명의 태아에서 시행하였다. 결 과 : 4명의 환자에서 4가지 새로운 돌연변이가 발견되었다(c.3511+1G>A (p.E1099_N1171delinsMfsX18), c.4005+5 G>A (p.V1268_R1335del), c.1870_2172del (p.S624_Q724del), c.3352 G>A (p.G1118S)). 나머지 1명의 환자에서 발견된 돌연변이는 이미 보고된 돌연변이이다(c.1933 C>T (p.V1268_R1335del)). 산전 진단에서 1명은 정상이었으며 다른 1명은 여자 보인자로 진단되었다. 결 론 : ATP7A 유전자 분석에서 4가지 새로운 돌연변이가 발견되었다. 유전자 분석과 이를 이용한 산전 진단은 조기진단 또는 치료적 유산을 결정하는데 결정적다. 본 연구에서 유전자 분석을 시행한 결과 대부분 해독틀(frameshift) 돌연변이였으며 산전 진단은 모두 성공적으로 수행되었다.

• 대한유전성대사질환학회지
• /
• 제23권1호
• /
• pp.25-30
• /
• 2023

아미노아실-tRNA 합성효소는 단백질을 만드는 번역(translation)단계에서 아미노산을 활성화시키고 적절한 아미노산을 해당 tRNA에 결합을 시키는 중요한 효소이며, IARS2 유전자는 미토콘드리아에서 작용하는 isoleucylt-RNA 합성효소를 코딩하는 핵의 유전자이다. IARS2 유전자의 돌연변이는 백내장, 성장 호르몬 결핍, 감각 신경병증, 감각신경성 난청, 골격 형성 이상 증후군의 특징을 보이는 CAGSSS (MIM#616007)라는 희귀 질환의 원인으로 상염색체 열성으로 유전된다. 현재까지 이 증례 보고를 포함하여 29명의 환자만이 보고가 되었음에도 단지 백내장의 증상만 나타냈던 환자, 그리고 신경학적 증상이 두드러지는 Leigh 증후군을 유발하면서 여러 장기에 영향을 주는 환자 등 다양한 임상 증상의 환자가 보고되었다. Leigh 증후군은 드문 진행성 신경 퇴행성 미토콘드리아 질환이다. 이 연구는 IARS2 연관된 Leigh 증후군의 환자에서 방광 기능의 이상의 표현형을 보고하는 첫 증례 보고로 의미가 있다. 5세의 한국인 여아는 복부 팽만을 동반한 복통으로 응급실에 내원하였으며, 복부CT에서 명백한 폐쇄 증상, 급성 신장염, 요로감염의 징후가 보이지 않으면서 현저하게 팽창된 방광이 확인 되었다. 여아의 발달 상태는 발달 저하를 보이면서, 6개월에 뒤집기가 가능하였지만 이후는 신경학적 퇴행으로 내원당시에는 목 가누기도 되지 않고, 의미 있는 단어를 말하지도 못하는 전반적인 발달 지연 상태였다. 2세에는 양쪽 눈의 백내장이 발생하여 수술한 과거력이 있었다. 뇌 MRI T2 강조영상에서는 양쪽에 대칭적으로 기저핵(basal ganglia)에 고신호를 보였고, 이는 Leigh 증후군에 전형적인 영상의 특징이다. Whole mitochondrial genome의 유전자검사를 시행했지만 의미 있는 돌연변이가 확인되지 않았으므로, Whole exome sequencing 검사를 시행했으며, IARS2 유전자의 이중대립유전자 돌연변이(biallelic mutation), c.2446C>T (p. Arg816Ter)와 c.2450G>A (p. Arg817His)가 확인이 되었고 부모님은 보인자였다. 현재까지 IARS2 유전자의 돌연변이를 가지는 환자 중에서 신경학적 발달 저하, 인지장애 등의 증상이 동반된 환자는 신체의 다중장기질환의 증상으로 심비대, 부정맥, 빈혈, 측만증, 청력 저하, 뇌전증, 부갑상선저하증이 알려졌으나, 이 연구에서 IARS2 유전자 돌연변이를 가진 환자에서 배뇨근의 이상을 동반한 과민성방광증상을 확인하여 방광이상증상을 처음 보고를 한다. IARS2 유전자의 이상이 확인된 환자에서는 하부요로이상증상이 동반 가능성에 대해서 인지하는 것이 필요하고, 증상이 보이면 배뇨 일지나 요역동학검사를 통해서 조기에 진단 및 치료가 환자의 관리에 필요할 수 있다. 이 증례 보고는 IARS2 유전자의 임상 양상의 확대 및 유전자의 이해를 넓히는데 기여할 것으로 기대된다.

• Korean Journal of Radiology
• /
• 제24권8호
• /
• pp.807-820
• /
• 2023

Objective: To assess whether computed tomography (CT) conversion across different scan parameters and manufacturers using a routable generative adversarial network (RouteGAN) can improve the accuracy and variability in quantifying interstitial lung disease (ILD) using a deep learning-based automated software. Materials and Methods: This study included patients with ILD who underwent thin-section CT. Unmatched CT images obtained using scanners from four manufacturers (vendors A-D), standard- or low-radiation doses, and sharp or medium kernels were classified into groups 1-7 according to acquisition conditions. CT images in groups 2-7 were converted into the target CT style (Group 1: vendor A, standard dose, and sharp kernel) using a RouteGAN. ILD was quantified on original and converted CT images using a deep learning-based software (Aview, Coreline Soft). The accuracy of quantification was analyzed using the dice similarity coefficient (DSC) and pixel-wise overlap accuracy metrics against manual quantification by a radiologist. Five radiologists evaluated quantification accuracy using a 10-point visual scoring system. Results: Three hundred and fifty CT slices from 150 patients (mean age: 67.6 ± 10.7 years; 56 females) were included. The overlap accuracies for quantifying total abnormalities in groups 2-7 improved after CT conversion (original vs. converted: 0.63 vs. 0.68 for DSC, 0.66 vs. 0.70 for pixel-wise recall, and 0.68 vs. 0.73 for pixel-wise precision; P < 0.002 for all). The DSCs of fibrosis score, honeycombing, and reticulation significantly increased after CT conversion (0.32 vs. 0.64, 0.19 vs. 0.47, and 0.23 vs. 0.54, P < 0.002 for all), whereas those of ground-glass opacity, consolidation, and emphysema did not change significantly or decreased slightly. The radiologists' scores were significantly higher (P < 0.001) and less variable on converted CT. Conclusion: CT conversion using a RouteGAN can improve the accuracy and variability of CT images obtained using different scan parameters and manufacturers in deep learning-based quantification of ILD.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.