• 한국군사과학기술학회지
• /
• 제16권5호
• /
• pp.653-658
• /
• 2013

For towing the new type armored vehicle and maintaining the close support, the armored recovery vehicle(ARV) with winch and crane has been developed. In case of crane, it is mainly used to salvage heavy objects by rotational and vertical motion. Especially, the crane bracket is very important parts due to fixing the ARV's body and rotary joint and preventing the force rotation of crane. Therefore, the crane bracket needs to have an enough strength to endure the high load and it is very important to analyze the stress distribution under loads. In the present work, the experimental and analytical investigation on structural integrity evaluation of crane bracket were carried out. The simulation of three-dimensional finite element method(FEM) was compared with experimental datum. From the numerical results, the FEM simulations corresponded well with th experimental results and the structural safety was confirmed by safety factor.

• 대한치과교정학회지
• /
• 제20권2호
• /
• pp.409-417
• /
• 1990

Tooth movement would be impeded by frictional force arised between archwire and tube, bracket or elastics in the fixed orthodontic appliances, which could be changed variably by such several factors as the contact area, normal (perpendicular) force and the condition of contact surface. There were many literatures about frictional force in the orthodontic region, but different results were obtained from little controlled research so that was very difficult in clinical application. Therefore we have reviewed comprehensively previous literatures about frictional force and thus several results were obtained as follows: 1. For use species of the orthodontic wire, frictional force was influenced mainly by surface roughness of wire in the absence of binding, while that was influenced mainly by normal force in high binding angulation. 2. For the cross-section and diameter of the wire, the contact area influenced mainly on frictional force in the absence of binding, while wire stiffness influenced mainly on frictional force in high binding angulation. 3. The greater the bracket width, the greater frictional force, and frictional force of the plastic bracket was larger than that of the metal bracket. 4. For ligation type, frictional force of the stainless steel ligation was larger than that of the elastic ligation, and frictional force was directly proportional to ligation force. 5. Variable frictional force were occured from the saliva combined with such another factors as normal force and mode of surface oxide et al.

• 한국강구조학회 논문집
• /
• 제20권4호
• /
• pp.483-491
• /
• 2008

1994년 노스리지 지진 이후, 철골모멘트골조 강축방향 접합부의 내진성능 평가에 관한 연구가 국내 외에서 활발하게 진행되어온 반면, 국내 철골모멘트골조 내진설계 및 시공의 실무에 관행적으로 적용되고 있는 철골모멘트골조 약축방향 접합부의 내진성능 평가 연구가 국내는 물론 국외에서도 그 사례를 찾아보기 힘든 상황이다. 따라서 본 연구에서는 국내에서 내진성능 확보 여부가 확인되지 않은 상태에서 내진설계 실무에서 가장 많이 사용되고 있는 브라켓 형식 및 WUF-B 형식의 접합상세를 갖는 철골모멘트골조 약축접합부의 실물대(Full scale) 실험체를 제작 및 실험하여 이와 같은 형상의 접합부에 대한 내진성능을 평가하여 향후 이와 같은 형상을 갖는 철골모멘트골조 약축접합부의 설계를 위한 기초자료를 제공하는 것을 목적으로 한다. 이러한 목적을 달성하기 위하여, 현장조사 및 설계도서등의 기존 자료를 통해 총 2개의 실험체를 제작하여 내진성능을 평가 실험연구를 수행하였다. 실험결과로부터 최대내력 비교, 하중-변위 이력 및 응력도 등에 대한 거동을 비교 분석 하였다. 실험결과 층간변위각 5%의 BR-W 실험체가 층간변위각 4%를 갖는 WUF-B 실험체에 비해 우수한 구조적 거동을 보여주었으며, 설계 내력을 상회하는 내력을 보유하고 있는 것을 알 수 있었다. 또한 브라켓 형식의 실험체는 최대내력 도달 이후 완만한 강도 저하를 나타내었으나, WUF-B 형식의 실험체는 최대내력 도달 이후 급격한 하중 저하를 나타내며 취성적인 거동을 보였다.

• 한국농촌건축학회논문집
• /
• 제18권1호
• /
• pp.19-28
• /
• 2016

This research aimed to suggest a standard design that reflects Hanok design tendency, and present a selective design that can fulfill a building owner's intention beyond the simple function of building permit or report. In addition, this research attempted to become a standard by establishing a criterion in calculating the measurements of section design or primary framework members, in order to be a guideline for designing Hanok in different sizes and forms. The results are as follows. The building area of Hanok standard design was set to be below $85m^2$, with a straight type of $83.16m^2$ and an L-shape of $84.24m^2$. By dividing the plane into a straight type and L-shape, two straight types were suggested: 'general type' and 'large living room type.' The upper floor space, along with the main room and small room, was proposed as an option to be changed into a room where an underfloor heating is installed depending on the building owner's intention. In addition, a criterion for side design and calculation of framework measurements was suggested and applied, while a five-girder design without high pillars was suggested for material-assembling structure. Two types of pillars-circumference and square cylinder-were proposed for the building owner to choose from, and a pointed beam house and ikgong(orthogonally-projected bracket) house were suggested for pojak bracket structure so either of them could be chosen according to the building owner's taste and economic condition. Finally, the sectional size of main materials were divided according to the form of pojak bracket structure to be proposed.

• 한국공간구조학회논문집
• /
• 제8권1호
• /
• pp.89-97
• /
• 2008

본 논문은 유닛 모듈러를 구성하는 주구조체인 각형강관 기둥과 냉간성형 LEB C-형강 보로 볼트 접합된 접합부의 거동을 실험적으로 평가하는 것이 연구의 목적이다. 접합부에서 기둥과 LEB C-형강 보를 접합하기 위한 브라켓의 두께변화, LEB C-형강 보와 브라켓 접합부 볼트 개수 등의 주요변수에 대한 실험을 통하여 기둥-보 접합부의 내력증대와 변형성상 및 파괴모드 변화 등을 고찰하였다. 실험결과, 접합부의 보강형상과 관계없이 또한 접합부의 파괴 없이 LEB C-형강 보의 국부좌굴강도가 지배하는 것으로 파악되었으며, 브라켓 두께 크기에 따라 내력과 강성이 조금 높게 나타남을 알 수 있었다. 또한 접합부에 사용된 볼트 수량에 관계없이 강성면에서 큰 차이를 나타내지 않았으며 LEB C-형강과 브라켓을 볼트접합으로 반강접합의 역학적 거동 가능성을 확인하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.84-89
• /
• 2005

The double hull VLCC(Very Large Crude Oil Tanker) have been designed to have each four(4) longitudinal bulkheads and transverse bulkheads in general. Actually, the inside longitudinal bulkheads among four(4) longitudinal bulkheads, which are extended up to the end of the aft cargo hold for continuity of the members, have been designed with knuckled type inboard due to the narrowed hull shape at bottom region, but sometimes the straight type of longitudinal bulkheads were adopted based on the degree of the hull lines shape. However, regardless the type of longitudinal bulkheads, inside and outside longitudinal bulkheads conflict each other in aft cargo hold region This makes the structure more complex thus giving difficulties to structural design and production. Recently, a vessel of straight type was reported to have cracks on bracket end and tripping bracket toe in aft cargo hold region. As a solution to this problem, in designing the first 60m Beam VLCC, DSME developed a new cargo hold structure which is good in production and structural point of view by structural strength and fatigue analysis of fore and aft cargo hold.

• 대한치과교정학회지
• /
• 제39권2호
• /
• pp.105-111
• /
• 2009

법랑질 탈회는 교정 치료 중에 발생하는 대표적인 부작용으로서 특히 교정용 브라켓에 대한 세균 부착이 그 원인이 될 수 있다. 본 연구의 목적은 서로 다른 표면 특성을 가진 세 종류의 브라켓을 구강 내 장착했을 때 각 재료의 표면에 대한 mutans streptococci 부착 정도를 측정하여 브라켓 재료에 따른 법랑질 탈회 및 치아 우식 발생 가능성을 분석하는 것이었다. 상하악 및 치아 부위별 mutans streptococci 부착 정도의 차이를 배제하고 브라켓 원재료에 따른 차이만을 검출하기 위하여 균형완전블록 실험계획을 설계하였다. 피실험자인 30세 여성의 구강 내에 장착할 수 있는 tooth positioner 형태로 3세트의 플라스틱 맞춤 트레이를 제작하였으며, 이 트레이에 직육면체의 형태($4{\times}3{\times}2\;mm$)로 제작한 stainless steel, monocrystalline sapphire, polycrystalline alumina 조각을 세트마다 서로 다른 순서로 전치부와 구치부 순면에 부착하였다 이렇게 제작된 3종류의 실험장치를 12시간 동안 피 실험자의 구강 내에 장착한 후, 각 브라켓 재료 표면에 형성된 치태를 채취하여 bacitracin이 포함된 mitis salivarius배지에서 48시간 배양 후 colony counting을 통해 그 표면에 부착된 mutans streptococci 양을 비교하였다. 이와 같은 방법으로 3세트의 실험장치에 대해서 각각 5회씩 총 15회의 실험을 시행하였다. 그 결과 상하악 및 치아 부위별 및 브라켓 재료별 세균 부착 정도는 모두 유의한 차이를 보이지 않았다. 결론적으로 본 연구의 결과 in vivo condition에서 브라켓 재료의 차이는 mutans streptococci 부착에 영향을 미치지 못하는 것으로 보였다.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.65-71
• /
• 2010

In this study, a series of finite element analysis using LUSAS were performed in order to assess the quantitative effects of repair and retrofit of stringer in steel plate girder railway bridge with fatigue cracks. And cutoff types of end part of upper flange were considered as right-angled type and round-angled type. Also, as a method of repair and retrofit of fatigue cracks in stringer, perforation of stop-hole and installation of bracket were considered. From the analysis result, it was possible to assess the fatigue safety and fatigue life of stringer with fatigue cracks, and to estimate the stress intensity factor range in cut-off part of stringer using J-integral method. Also, according to the method of perforation of stop-hole and installation of bracket, it was possible to calculate the crack propagation life at the cut-off part of stringer.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.199-205
• /
• 2013

Stress and deformation on forklift happened at loading, unloading or moving freight are studied by structural and fatigue analysis in this study. As model 1 as closing type between forks has lower stress and stain than model 2 at opening type, model 1 has more durability than model 2. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'SAE bracket history' with the severest change of load at model 1 and 2, maximum life is shown with Cycle. Minimum damage with 854 at model 2 becomes much higher than model 1. As the gap between forks becomes open, the damage probability becomes higher. The structural result of this study can be effectively utilized with the safe and stable design of forklift by investigating prevention and durability against its damage.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1963-1969
• /
• 2009

This paper introduces method to estimate pollutant negative influence to polymer type insulator according to the international standard. To accomplish this goal, effective sample collecting method was surface was collected directly with the same dimension. Distilled Through this method pollute is easily and accurately collected. The second step is pollutant analysis. Several analyze item is selected such as quantity, conductivity, contact angle, Optical Microscope(OM), IR spectrometer(FT-IR), Equivalent Salt Deposit Density(ESDD), Thermal Analyzer(TA) and ICP-AES. The third step, best represent tunnel was selected considering location, length and natural surroundings. Also to consider the difference at inside the tunnel, several bracket insulators were selected along to the location. To make the result precise, above procedure was repeated several times at the same target. Finally relation among type of train, numbers of movement, surroundings, length will be considered in combination with the pollution. With this result pollute map for KORAIL could be accomplished and inspect period will be optimized case by case.