• Wind and Structures
• /
• 제30권2호
• /
• pp.119-131
• /
• 2020

A butterfly web girder is a box-shaped girder with discretely distributed side openings along the spanwise direction. Until now, there have been few studies related to the aerodynamic performance of the butterfly web bridge. The objective of the current study was to clarify the effects of the side openings on the aerodynamic performance of the girder. Two butterfly web girders with side ratios B/D = 3.24 and 5, where B is the girder width and D is the depth, were examined through a series of wind tunnel tests. A comparison of the results for butterfly web girders and conventional box girders of the same shape confirmed that the side openings stabilized the vortex-induced vibration and galloping when B/D = 3.24, whereas the vortex-induced vibration and torsional flutter were stabilized when B/D = 5. The change in the flow field due to the side openings contributed to the stabilization against the vibration. These findings not only confirmed the good aerodynamic performance of the butterfly web bridge but also provided a new method to stabilize the box girder against aerodynamic instabilities via discretely distributed side openings.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.147-150
• /
• 2001

In the present work, a linear static analysis is presented for thin-walled prismatic box-beams made of generally anisotropic materials. A mixed beam theory has been used to model and carry out the analysis. Three different constitutive relations are assessed into the beam formulation. Simple layup cases having symmetric or anti-symmetric configuration have been chosen and tested to clearly show the effects of elastic couplings of the beam. Both 2D and 3D finite element structural analysis using the MSC/NASTRAN has been performed to validate the current analytical results. Results show that appropriate assumptions for the constitutive equations are important and prerequisite for the accurate prediction of beam stiffness constants and also for the beam behavior.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.147-154
• /
• 1999

구안경(old spectacles)의 렌즈를 사용하고 안경테만 교환하는 경우의 조건에 부합되는 83 명을 대상으로 교환 동기, 테의 크기, 모양, 축의 연화, 양안시에 미치는 프리즘의 영향 등을 알아보았다. 안경테의 교환 동기는 80.4%가 파손이나 테부식에 의한 것이었고, 테의 모양은 타원형 계열이 62.4%, 사각형 계열이 37.6%를 차지하였다. 테의 크기는 구안경테(old frame)의 경우 $49{\Box}18$, 수직 거리가 33mm이었고 신안경테(new frame)가 $47{\Box}17$, 수직거리가 31mm로 작게 선택되는 것으로 나타났다. 신안경의 난시축의 변동 범위는 평균 +3.20~3.80이었다. 수평 방향의 프리즘의 영향을 RAL-RG 915기준에 의해 오차를 평가한 결과, 구안경에서 38.5%의 부적합이 신안경에선 42.2%로 증가하였다. 수직 방향에서 프리즘 변화 방향을 RAL-RG 915기준에 의해 오차를 평가해 보면 0.25${\leq}$1.00와 6.00D이상에서 적합 부적합률의 변동은 없었다. 그러나 1.00${\leq}$6.00에서는 부적합률이 구안경은 24.1%에서 신안경은 33.7%로 증가되었다.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.337-345
• /
• 2007

Nowadays, it is convenient to use 3D modeling tools for general planning before construction. Normally, a 3D model is built with 3D CAD such as 3D Studio Max, Maya, etc. or simply with AutoCAD. All these software packages are effective in building 3D models but difficult to use, because many provided functions and tools require prior knowledge to build both 2D and 3D designs. Moreover, the traditional method of building 3D models is most time-consuming as experienced operators and manual input are required. Therefore, how to minimize the building time of 3D models and provide easy-to-use functions for users who are not familiar with 3D modeling becomes important. In this paper, the VisualLISP programming language is used to create a convenient tool for efficient generation of 3D components for the AutoCAD environment. This tool will be demonstrated with the generation of a 3D sluice, an artificial passage for water fitted with a valve or gate to stop or regulate water flow. With the tool, users only need to enter the parameters of a sluice in the edit box and the 3D model will be automatically generated in a few seconds. By changing parameters in the edit box and pressing the "OK" button, a new 3D sluice model will be generated in a short while.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.961-966
• /
• 2003

In recent, the design of diaphragm which is representative disturbed region in PSC box girder bridge have been performed according to the empirical method or beam theory. But, these methods couldn't be described the behavior of the end diaphragm, and placed reinforcements accurately. As the compressive stress transferred by the web concentrated on the lower parts of diaphragm, it was demonstrated that the basic assumption of 2-D strut-and-tie model for the diaphragm that the compressive stress acts on the upper parts of the diaphragm is wrong. Meanwhile, in this research, after analyzing the variables of end diaphragm, the 2-D strut-and-tie models appropriate to each cases are proposed. And, the problems of 2-D strut-and-tie model were analyzed, so 3-D strut-and-tie model is proposed as well. There is no codes which include the demonstration of safety of 3-D strut-and-tie model. Hence, for nodes, the stresses at the elements which included the singular node in strut-and-tie model were investigated using the finite element analysis. And, the stress states of strut has one direction, so effective stresses were considered at the stage, dimensioning of the model. From the results, 3-D strut-and-tie model could predict the behavior of end diaphragm accurately, and design of reinforcement could be performed economically.

• 대한지역사회영양학회지
• /
• 제7권6호
• /
• pp.824-832
• /
• 2002

The present study was conducted to evaluate nutritional intake by lunch-box of middle school girls who live in Chonbuk area. Anthropometric measurements and food intake from lunch-box over a three day period were investigated in a total of 110 middle school girls from rural (n＝37) and urban (n＝73) areas. The results are summarized as follows : 1. Not all the steamed rice in the lunch-box had enough mixed-cereal. 2. In the survey of food intake by food groups, 70.5% of the food came from the cereal group. 3. The intake of protein, phosphate, Vitamins $B_1 and B_2$, niacine and Vitamin E were adequate, however, the intake of other nutrients was significantly lower than those of one-third of the Korean RDA.4. Protein, lipid, and zinc intakes of the students from the rural area were significantly lower than those of students from the urban area. however, the carbohydrate and dietary fiber intakes of those in the rural area were significantly higher than those of the students in the urban area. 5. The percentage of calories from carbohydrate : protein lipid ratio was 67.6 : 12.2 : 16.9 for students in the rural area and 59.2 : 14.9 : 22.5 respectively for those in the urban area. In Summary, the intake of calcium, iron, Vitamins A, $B_6$, and D, folate and zinc from lunch-box in middle school girls was much lower than that of one-third of the Korean RDA. The intake of carbohydrate and dietary fiber of the students in the rural area was significantly higher, but that of protein, lipids, and zinc was lower than that of the students in the urban area. Therefore, nutritional education programs for both students and their parents should be provided to improve the daily food intake from lunch-box.

• 미생물학회지
• /
• 제31권3호
• /
• pp.189-196
• /
• 1993

대두(Glycine max) 뿌리혹의 질소고정 공생균주 Bradyhizobium sp. SNU001 의 nod D 와 nodA 의 염기서열을 결정하였다. 총 314개의 아미노산을 암호화하는 nod D 의 open reading frame (ORF) 은 942bp 로 B. japonicum USDA110 의 nodD1 과 99.4% 의 유사성을 보여주었으며, 총 210개의 아미노산을 암호화하고 콩과식물의 Bradyrhizobium 에서는 처음으로 염기서열이 결정된 nodA 의 ORF 는 630bp 로 B. sp. (Parasponia) 의 nodA 와 81.5% 의 유사성을 보여주었다. nodYAB 오페론과 nodD 상류에서는 9bp의 반복서열을 각각 4번, 2번 가지는 보존적인 nodbox 가 발견되었으며 nodD 의 상류에서는 A, T-rich 서열도 존재하였다.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.111-117
• /
• 2017

본 논문에서는 유한요소 자유진동해석을 수행하여 박판 보에서의 국소변형효과를 조사하였다. 자유진동해석은 단일셀 및 다중셀 박스보에 대해 수행하였으며, 풍력발전 블레이드를 가장 단순하게 모사할 수 있는 단일셀 박스보를 먼저 해석하였다. 쉘요소 해석결과를 보요소 해석결과와 비교하여 보았을 때 박스 보의 박판 두께가 정확도에 매우 중요한 역할을 함을 확인하였다. 두께가 얇은 경우에는 쉘의 국소변형(또는 쉘 모드)가 주요하게 나타난 반면에 두꺼울 경우에는 전단변형의 효과가 크게 나타남을 알 수 있었다. 목이 있는 단일셀 박스보에서의 국소변형은 목 주위에 집중되어 나타남을 확인하였다. 마지막으로 실제 블레이드와 유사한 다중셀 테이퍼 보의 주파수 및 모드형상을 분석하였다. 보 요소 해석결과는 쉘 요소 결과와 비교하여 약 5~7% 주파수 차이를 보였으며, 이는 보요소가 국소변형을 제대로 모사하지 못하기 때문이다. 특히 래그모드(lagwise mode)의 경우에는 단면의 분할 정도의 영향보다 국소변형의 효과가 매우 크다는 것을 알 수 있었다.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.39-46
• /
• 2004

This experiment was carried out to study on the effect of surface coating on thermal insulation of farm structures to improve thermal resistance and reflective effect of solar radiation. Nine different types of experimental specimen were compared in the temperature variations of inside and outside; A, B, C, D. E and F types are box container and G, H and I types are drum container. The size of these containers is $1,500{\times}2,000{\times}2,500$ mm and ${\varphi}$ $280{\times}330$ mm, respectively. Specimen of 3-type box(A, B, C) is galvanized steel sheet of thickness 0.45 mm. D, E and F types are sandwich panel of the thickness 50 mm inserted with urethane, glass wool and polystyrene form, respectively. G, H and I types are paint pot using in general. The surface of A. D, E, F and I types didn't any treatment, B, C and G types were treated with thermal insulation coating on the outside surface(B, G) or the inside and outside surface(C). And H type was treated with water paint coating on the only outside surface. In general, the experimental results showed the following tendencies; In case of A, B and C types. it was found that the thermal insulation effect of types coated with thermal insulation coating was improved remarkably than that of no treatment. And the thermal insulation effect between steel sheet and sandwich panel type was nearly similar There was not a significant difference of thermal insulation effect between thermal insulation coating and water paint coating. In time of drum container filled with rough rice, The difference of heat transfer tendency and temperature variation among surface treatments was nearly similar that of box types of galvanized steel sheet. And there was time lag about 6 hours between the temperature of middle part of rice and that of inside or outside surface.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 추계종합학술대회
• /
• pp.199-203
• /
• 1999

본 논문은 MPEG-2 AAC 멀티채널 오디오 및 MPEG-4 오디오의 다중객체 부호화를 위한 DSP 시스템의 설계 및 구현에 관하여 기술한다. DSP로서는 TI 사의 최근 제품인 고성능의 TMS320C6701 (이하 6701로 함) 2개를 사용하였고, DSP 보드는 PC에 장착하여 프로그램을 다운로드하고 시스템을 제어할 수 있게 하기 위하여 PCI 인터페이스를 함께 구현하였으며, 부호화기 및 복화기로서 함께 사용할 수 있는 구조로서 설계하였다. 또한 멀티채널 오디오를 디지털 신호로 변환하고 다중화하여 직렬신호로서 입력하고, 다시 역으로 출력하기 위한 시스템을 별도로 외부에 구현하였으며, 접속 인터페이스로서 ADI (Alesys Digital audio Interface)론 사용하여, ADI 인터페이스를 지원하는 멀티채널오디오 장비론 입출력 시스템으로 사용할 수 있도록 하였다. 현재의 결과로서는 MPEG-2 AAC 4채널 오디오를 2개의 DSP를 사용하여 실시간으로 안정되게 부호화 할 수 있으며, 1개의 DSP로도 8채널까지의 복호화가 가능함을 확인하였다.